---
title: "ETH Oberon System 3 on VirtualBox 6.1"
author: "rsdoiel@gmail.com (R. S. Doiel)"
date: "2021-03-17"
keywords: [ "FreeDOS 1.2", "VirtualBox 6.1", "Oberon System 3", "Native Oberon" ]
copyright: "copyright (c) 2021, R. S. Doiel"
license: "https://creativecommons.org/licenses/by-sa/4.0/"
---
ETH Oberon System 3 on VirtualBox 6.1
=====================================
By R. S. Doiel, 2021-03-17
In this post I am walking through installing Native Oberon 2.3.7
(aka ETH Oberon System 3) on a virtual machine running under
VirtualBox 6.1. It is a follow up to my 2019 post
[FreeDOS to Oberon System 3](/blog/2019/07/28/freedos-to-oberon-system-3.html "Link to old blog post for bringing up Oberon System 3 in VirtualBox 6.0 using FreeDOS 1.2"). To facilitate the install I will first prepare
my virtual machine as a FreeDOS 1.2 box. This simplifies getting the
virtual machines' hard disk partitioned and formatted correctly.
When Native Oberon was released back in 1990's most Intel flavored
machines shipped with some sort Microsoft OS on them. I believe
that is why the tools and instructions for Native Oberon assume
you're installing over or along side a DOS partition.
Building our machine
--------------------
Requirements
------------
1. Install VirtualBox 6.1 installed on your host computer.
2. Download and install a minimal FreeDOS 1.2 as a virtual machine
3. Downloaded a copy of Native Oberon 2.3.7 alpha from SourceForge
3. Familiarized yourself Oberon's Text User Interface
4. Boot your FreeDOS virtual machine using the Oberon0.Dsk downloaded
as part of NativeOberon_2.3.7.tar.gz
5. Mount "Oberon0.Dsk" and start installing Native Oberon
Before you boot "Oberon0.Dsk" on your virtual machine make sure
you've looked at some online Oberon documentation. This is important.
Oberon is very different from macOS, Windows, Linux, DOS, CP/M or
Unix. It is easy to read the instructions and miss important details
like how you use the three button mouse, particularly the selections
and execute actions of text instructions.
Virtual Machine Setup
---------------------
VirtualBox 6.1 can be obtained from [virtualbox.org](https://www.virtualbox.org/). This involves downloading the installer for your particular host
operating system (e.g. Linux, macOS or Windows) and follow the instructions
on the VirtualBox website to complete the installation.
Once VirtualBox is installed, launch VirtualBox.
Click the "New" button and name your machine (e.g. "Native Oberon 2.3.7 Alpha") and choose type of "Other" and version "DOS". Click continue. I accepted
the default memory size of 32 MB. This is plenty for Oberon. I clicked on create disk and accepted the default VDI (VirtualBox Disk Image). Press continue. I think accepted "Dynamically allocated", press continue. I chose a "disk size" of 100.00 MB. Oberon System is tiny. Press create button.
Make sure your new machine is highlight on the left side of the VirtualBox
management panel. Click on Settings button, it looks like a gear towards
the top. Click "Display" on the model dialog and bump the Video Memory
up to 128 MB. I also clicked Enable 3D Acceleration (though I don't think
Oberon uses this). Before clicking OK click on the Network icon in the
modal dialog box. Change "NAT" to "Bridged Adapter". Now click "OK" to
close the modal dialog box.
Your VirtualBox is now ready, before pressing "Start" we need
to install FreeDOS 1.2.
Make a FreeDOS 1.2 machine
---------------------------
Download the [FD12CD.iso](https://www.ibiblio.org/pub/micro/pc-stuff/freedos/files/distributions/1.2/FD12CD.iso) file from the
[FreeDOS project](https://freedos.org/download).
"Insert" the "FD12CD.ISO" file into our VirtualBox 6.1
CD-ROM drive. Go to the VirtualBox management panel.
In the area that summarizes storage click the word "Empty"
in the line with "[Optical Drive]". Find the "FD12CD.ISO"
you downloaded and select it.
Now press the green "Start" arrow in the VirtualBox management
panel. This should start your virtual machine and it will boot
using the CD-ROM drive.
This will display a welcome screen with installation options.
Press your "tab" key once. This should cause a boot string to be
displayed. Type a space and then type the word "raw" (without quotes).
Press enter. Next select the language you want to install with
(e.g. English). Choose "Yes - Continue with installation" on the
next prompt. You should then be given a dialog box that
indicates "Drive C: does not appear to be partitioned.", select
"Yes - Partition drive C:". Then that completes press
"Yes - Please reboot now".
This will cause the machine to reboot and you will be faced with
the "Welcome to FreeDOS 1.2" screen once again. Press the "tab"
Add a space and type "raw" to the boot string as before.
Select the language again then select "Yes - Continue with
installation". The screen should now say something like
"Drive C: does not appear to be formatted", select
"Yes - Please erase and format drive C:".
When done it'll gather some info on the system and ask you
which keyboard you're using. Pick yours (e.g. "US English (Default)").
It will then give you a choice of what to install. Since we're
going to overwrite this when we install Oberon just select
the base package, then select "Yes - Please install FreeDOS 1.2"
Before selecting "Yes - Please reboot now" when the install is
finished you want to "eject" your FD12CD.ISO from the virtual
CD-ROM drive. Switch back to your VirtualBox management panel.
Click the text that says "FD12CD.iso" and select "remove disk
from virtual drive" in the popup menu. Switch back to your
Virtual machine and select "Yes - Please reboot now"
If all goes well the machine will boot into FreeDOS 1.2. When
you see the "C:>" prompt type "shutdown" (without the quotes)
and press enter. We're now ready to start installing Native
Oberon 2.3.7.
Native Oberon 2.3.7
-------------------
Native Oberon used to be hosted at ETH where Oberon and the Oberon
System was first developed as a research and instructional project.
Unfortunately this seems to no longer be supported by ETH. Prof. Wirth
has long been retired now and they no longer choose to use such a
useful language or Operating System.
SourceForge has a mirror of the original sources and some of the
remaining community has put at a "new" release of 2.3.7 Alpha
bringing Native Oberon a little closer to the present. It's this
version we'll use. You can read more at the [SourceForge](https://sourceforge.net/projects/nativeoberon/) as well as at the [Oberon Wikibook](https://en.wikibooks.org/wiki/Oberon). ETH also still maintains an email
list for Oberon and it is active. It can be found at
https://lists.inf.ethz.ch/mailman/listinfo/oberon. I recommend
browsing the archives of the Email list if you run into problems.
I've found very helpful information there and the people on the
list seem happy to answer a novices question.
We are going to be downloading files from the Native Oberon Project's
Files page at SourceForge.
> https://sourceforge.net/projects/nativeoberon/files/nativeoberon/
In the Files page download the instructions
[NativeOberonInstall.pdf](https://sourceforge.net/projects/nativeoberon/files/NativeOberonInstall.pdf/download)
or or the text version. This document by Pieter Muller (May 1999) explains
the installation process. It is good for its overview though I found
the actual process simpler than what was described for May 1999.
On the Files page you'll also see a green button to "Download Latest Version", NativeOberon_2.3.7.tar.gz. Click the button and download it.
The NativeOberon_2.3.7.tar.gz contains the files we'll need to run
NativeOberon on our VirtualBox. Ungzip and untar the file into
a location that is convenient for you. I put mine
in `src/NativeOberon-2.3.7` and I had downloaded the file into my
home directory's "Downloads" folder.
```shell
mkdir -p src/NativeOberon-2.3.7
cd src/NativeObeorn-2.3.7
tar zxvf ~/Downloads/NativeOberon_2.3.7.tar.gz
```
You now have the software ready to proceed in installing the system
in VirtualBox.
NativeOberon in a VirtualBox
----------------------------
Go back to your VirtualBox management panel. We need to place
he boot disk image in the virtual floppy drive. In the files
we unpacked (i.e. ungzip and untar) there is a file named
"Oberon0.Dsk". We want to mount that in the virtual floppy drive.
Click on the word "Empty" next to "Floppy Device 0:" in the management
panel. You are then given a modal dialog box and we want to select
"Choose a disk file". You can then find the files you save and
select "Oberon0.Dsk".
Booting with Oberon0.Dsk
------------------------
We can now click "Start" button at the top of the VirtualBox management
panel. This will boot the virtual machine using "Oberon0.Dsk". Oberon
itself loads completely into memory.
You now have a running Oberon System but we need to install it
on the virtual hard drive. Fortunately our running system comes with
built in instructions. It is here that people how haven't
used Oberon before are going to run into trouble.
Oberon System uses all three buttons of a three button mouse. On
most mice I've encountered to day there are two buttons and a
scroll wheel. The scroll wheel is click able and functions like
the middle button on an Oberon mouse.
The left mount button sets the pointer, the middle button (our
scroll wheel if your mouse is like mine) is used to execute
commands and the right mouse button is used to select text.
In our installation instructions displayed on our virtual
machine we generally be middle clicking the blue colored text.
In Native Oberon all text is potentially actionable. Unlike in
Unix where you type a command press enter then have to retype
(or use the command history) to execute the next command we're
going to click on the text and sometimes select text to execute
commands. Before we proceed I highly recommend readying
and trying a tutorial out before attempting to install Oberon
on your virtual hard drive. There is an [Oberon System 3 - Main Tutorial](https://web.archive.org/web/20171226183816/http://www.ethoberon.ethz.ch/ethoberon/tutorial/) available at the Internet Archive's Wayback machine.
Installing to our Virtual Hard disk
----------------------------------
Along the right side (in the system track) is the text "Edit.Open Introduction.Text". Click with your middle button (scroll wheel on my
mouse) and this will open the text in the "Edit" track on the left
side. Read this text if you haven't before. Scrolling through
the text is a little different than the scroll bars on macOS, Windows,
X Windows. They are on the left side and the middle mouse button
sets the scroll position. The left button pages down, the right
pages up. You can close the "Introduction.Text" windows by
middle clicking "System.Close" in the upper menu bar.
Review step 1.
--------------
We need to configure the hard drive by middle clicking on
"Config.Desk Standard ATA/EIDE"[^1]. In the console viewer above
you should see something like
[^1]: This blue text makes it clear the command is actionable, like a link in the web browser. But the actual text is the command not the color.
```
Disk: Standard ATA/EIDE
Static BootLinker for OM Object Files / prk
linking Native.Bin 255388
```
Review step 2.
--------------
Middle click on "Edit.Open InstallFiles.Tool". A "Tool" file
is like a text file but usually contains instructions and
a sorta menu or recipe of commands. In fact our instructions
in the lower viewer of the system track is a "Tool" file called
"Install.Tool". Using "Edit.Open" to open the tool or text file
opens a viewer on the left track, the edit track. If you had
clicked on "System.Open Install.Tool" it would open a viewer
on the right, or systems track. In either track by default
the viewers will tile (not overlap). If you want to close
a view you can click on "System.Close" in the viewer's menu
bar. Now open our InstallFiles.Tool in the edit track.
InstallFiles.Tool
-----------------
We now are going to prepare our virtual hard drive. Like
our "Install.Tool" text we have a series of instructions
which commands we can click on (the ones in blue).
Middle click on "Partitions.Show ~". This will open a pain
showing the partition information. You should see something
like
```
Disk: Diskette0, GetSize: no media, removable
Disk: IDE0, 99MB, VBOX HARDDISK
IDE0#00 99MB --- (Whole disk)
IDE0#01 99MB --- (Free)
Disk: IDE2, GetSize: no media, removable, VBOX CD-ROM
```
This tells us we have three drives in our VirtualBox
visible to Oberon. The first is the floppy drive.
It shows "no media". That might seem odd but when you
read the "Oberon0.Dsk" it read that into memory and the
whole OS is not running in memory, not from disk! While
the disk is still "in the drive" as far as VirtualBox
is concerned it isn't "mounted" from the point of view of
the operating system.
The second disk section describes our virtual hard drive.
The third describes the virtual CD-ROM drive.
We're interested in using the disk "IDE0" with the
device number of "01", we express that as "IDE0#01".
In the "Partitions.Text" viewer where we see the
partitions information we can type the command
described in "InstallFiles.Tool"
```
Partitions.ChangeType IDE0#01 6 76 ~
```
We then middle mouse click on line we just type. This
should produce output in the "System.Log" view in the
upper right of the screen that looks like
```
IDE0#01 changed to type 76
```
I had to do a modified version of step 3 of "InstallFiles.Tool"
choosing option "b".
In the output of "Partitions.show ~" (i.e. the Partitions.Text
viewer) want to middle click on the "I" of "IDE0#01".
Then right mouse button select "IDE0#01".
From 3a in the "InstallFiles.Tool" viewer middle mouse button
click on "Partitions.Format ↑". This should result in
the "System.Log" viewer showing
```
IDE0#01 format successful
```
After formatting the drive I was able to complete step 3b by
middle clicking the commands as provided in the "InstallFiles.Tool"
> NOTE: you may need to scroll that window to see all of step 3
Middle click on "Partitions.UpdateBootFile ↑"
The "Systems.Log" viewer should show
```
IDE#00 update successful
```
Middle click on "FilesSystem.Mount DST AosFS ↑" in 3b. The
"System.Log" viewer should show
```
DST: mounted
```
We are ready for Step 4. This command does the brunt of the
work of coping things over. The command "Configuration.DoCommands"
take a list of Oberon commands and executes them one after the
other. Middle Mouse click on "Configuration.DoCommands".
The "System.Log" viewer will show many messages that are
a result of each command taken. Make sure there are no errors.
The last series of commands renamed files so you should see
something like
```
System.RenameFiles
DST:Rel.Obeorn.Text => DST:Oberon.Text renaming
DST:Rel.Network.Tool => DST:Network.Tool renaming
DST:Rel.DOS.Tool => DST:DOS.Tool renaming
```
For step 5 of "InstallFiles.Tool" we can close our "InstallFiles.Tool"
viewer by middle clicking on "System.Close" in the menu bar. You can
also close the "Partitions.Text" viewer using its menu bar and
middle clicking "System.Close".
Right now we've formatted our hard drive and copied a bunch of
files too it. We still need to configuration our system before
it is self hosting.
In the "Install.Tool" viewer we want to open our "Configure.Tool".
Middle click on the "Edit.Open Configure.Tool".
Configuring our Oberon System
-------------------------------
The configuration tool breaks configuration into a series of
parts. First part is configure the display in Part two
we make the hard disk bootable.
To configure out display we want to middle click on the blue text in
"Config.DetectVesa (BIOS cal might hang some systems!)".
You will be presented with a list of screen resolutions. I middle
clicked the blue text in "Config.Vesa 00000147H 1600 * 1200 * 32".
In the "System.Log" viewer this showed
```
Vesa mode 00000147H
```
> NOTE: You will likely need to scroll down the page using the scroll bar
In part two we need to decide how we want to boot Oberon. In our case
I recommend Option 2, boot Oberon directly (non-FAT hosted). Middle
click the blue text "Config.BootParition menu ~".
The "System.Log" viewer should output
```
IDE0#01 config written
```
Middle click the blue text "Partitions.Show ~". Like in
"InstallFiles.Tool" this will open a new "Partitions.Text"
viewer with content like
```
Disk: Diskette0, GetSize: no media, removable
Disk: IDE0, 99MB, VBOX HARDDISK
IDE0#00 99MB --- (Whole disk)
IDE0#01 99MB 76 * Native Oberon, Aos
Disk: IDE2, GetSize: no media, removable, VBOX CD-ROM
```
Using your right mouse button select "IDE0#01" then in the
"Configure.Tool" viewer middle click the blue text
"Partitions.Activate ↑". The "System.Log" viewer should
show
```
IDE0#01 already active
```
We don't have a partition to deactivate so we can skip the last
step of option 2. This is a good place to "eject" our
floppy disk "Oberon0.Dsk" before we "System.Reboot".
To eject the disk click on "Oberon0.Dsk" in the VirtualBox
manager panel. The should then change the text to "Empty".
Finally we're ready to move to the last step in "Configure.Tool".
Scroll down and find "System.Reboot".
Middle click on the blue text "System.Reboot". At this point
the virtualbox should reboot from the virtual hard drive.
This reboot will take a little longer than the floppy boot
and the screen size of the virtualbox will be large based on the
settings you picked early. You have a minimal working Oberon
System 3. Now to install some more programs and flesh the system out.
Install some programs
---------------------
First we need to get the zip files provided in
NativeOberon_2.3.7.tar.gz on to the hard drive.
Historically these were done via 1.44 MB floppy disks.
We're going to make it easier. Native Oberon 2.3.7 can
read an ISO formatted CD-ROM.
Making our virtual CD-ROM
-------------------------
Under Ubuntu 20.04.2 LTS machine creating a ISO image
is one command. Below is I am going to create an ISO
image of the directory "NativeOberon-2.3.7"
and save the image as "NativeOberon-2.3.7.iso".
```shell
mkisofs -J --iso-level 3 \
-o NativeOberon-2.3.7.iso NativeOberon-2.3.7
```
The `-J` says to use the Joliet extensions, the `--iso-level`
sets the level of ISO support, in this case to 3. See
the manpage for `mkisofs` for details.
On macOS this involves two commands. First use
the "Disk Utility" to create an image of the folder
where you unpacked NativeOberon_2.3.7.tar.gz.
This will result in a ".dmg" or disk image file common
on macOS. Next we need to convert this to an ISO
formatted image file. For that we use a command line
macOS tool called `hdiutil` to convert the disk
image to an ISO format. In the process you will create
the ISO file but it will have the extension of ".cdr".
You can rename (i.e. mv) that file so it has a ".iso"
extension. This is suitable to mount in VirtualBox's
virtual CD-ROM drive.
```shell
hdiutil convert NativeOberon-2.3.7.dmg -format UDTO -o NativeOberon-2.3.7.iso
mv NativeOberon-2.3.7.iso.cdr NativeOberon-2.3.7.iso
```
Go to the VirtualBox 6.1 management panel and mount the
ISO image file you created. Now we're ready to return
to our Native Oberon virtual machine.
Installing from an ISO CD-ROM
-----------------------------
I suggest create the following as it's own tool text.
But if you want you can also type in the commands and
execute one by one.
```
These are the instructions from installing the Native
Oberon 2.3.7 zip archive files. Steps:
1. See what the CD-ROM mount point by reviewing the partitions
Paritions.Show ~
On my virtual machine the second disk is IDE2 and that
is where we'll find the CD-ROM.
2. Mount the ISO image as CD
FileSystem.Mount CD ISOFS IDE2 ~
3. Check to see what files are on the CD-ROM
System.Directory CD:* ~
4. Copy the files from the CD-ROM to the harddisk
System.CopyFiles
CD:Apps1.zip => Apps1.zip
CD:Apps2.zip => Apps2.zip
CD:Docu.zip => Docu.zip
CD:Gadgets.zip => Gadgets.zip
CD:Pr3Fonts.zip => Pr3Fonts.zip
CD:Source1.zip => Source1.zip
CD:Source2.zip => Source2.zip
CD:Source3.zip => Source3.zip
~
5. Unzip all our archives using the ZipTool.
ZipTool.ExtractAll \o \p SYS:
Gadgets.zip Docu.zip Apps1.zip Apps2.zip
Pr3Fonts.zip Pr6Fonts.zip
Source1.zip Source2.zip Source3.zip
~
```
You should now have a full installed Native Oberon 2.3.7
system running under VirtualBox 6.1. Enjoy your explorations.