- Key switches. Good lord key switches. If anyone has advice on where to
  get some for cheap (preferably less than $0.50 a piece), please let me
  know. I would like to use linear ones for the correct feel. Blues just
  wouldn't be right on this machine.

- Key caps. The ones on it aren't compatible with any modern switch. I'm
  going to try and find caps that match the original as close as possible;
  although, I may take some liberties to make the keyboard layout more
  modern. The old layout kind of sucked.

- Soldering Iron. My current soldering iron is weak and barely does the
  job for soldering small things. I need a more powerful one so that I
  can do this project with more ease and less risk of failure.

- Capacitors, resistors, wires, voltage regulators, etc. Kind of
  self-expanatory. The crt driver board needs to be repaired, and I also
  need the bits to build the keyboard and the main board.

- Fuses. Don't want it to smoke.

- GBS-8100. Converts VGA to CGA.

- Teensy 2.0 Keyboard Controller. Obviously need this for the keyboard.

- New Power Supply. I need one that can output at least 15V at 3A. I
  could use the transformer that's part of the original machine and
  rectify it, but my big fear is that it will fail. I would rather avoid
  the aging behemoth and just buy a DC power supply.