Wireless Home  (490-2010)          Features             Faxback Doc. # 8322
Alarm System

Your Safe House Wireless Alarm System provides quality protection for your
apartment or home, and the system is expandable so you can add on extra
devices as your security needs grow.  The system is easy to install because
you do not need to run wires from the transmitters to the control base.
Also, the minimal installation makes it easy to move the system from one
location to another.

With the required accessories (not supplied), you can immediately begin
using the system.  Be sure you read this entire manual to learn the correct
procedures for preparing, installing, testing, and operating the system.

Your alarm system includes the following features:

16 Security Zones-let the system monitor up to 16 transmitters for
wide-range protection.

Four-Digit Security Access Code-prevents unauthorized people from tampering
with the system.

Built-In Siren-sounds an 85 dB tone (at 10 feet) when the alarm is
triggered.

Wireless Remote Control-lets you arm or disarm the system away from the
base as you enter or leave your home.

Home and Away Arming Modes-let you arm the system to protect doors and
windows while you are at home, or arm the system for full protection of the
interior and perimeter while you are away from home.

Day Arming Mode-lets you use the system as an entry chime to make you aware
of people entering and leaving your home.

Smoke Alarm Siren Detector-gives you protection from smoke and fire by
detecting the alarm siren of an existing smoke alarm, and then sending a
signal to the base.

Support for External Devices-lets you connect an optional siren, automatic
dialer, motion detector, strobe light, or other external security device.

Battery Backup Power-provides extra security by ensuring the system
operates in case of a power failure.

Supervised Transmitters-let you know when the battery in the door/window
transmitter or smoke alarm siren detector is low.

LED Zone Status Display-shows you the status of each zone and other
information, such as low-battery or fire conditions.

SUPPLIED ITEMS

Your alarm system contains the following items:

*  One Base Unit
*  One Door/Window Transmitter
*  One Normally-Closed Sensor
*  One Smoke Alarm Siren Detector
*  One Remote Control
*  Two Mounting Screws for Door/Window Transmitter and Smoke Alarm Siren
   Detector

REQUIRED ACCESSORIES

Your alarm system requires the following accessories not supplied with the
system.  These are available at your local Radio Shack store:

*  Two 9-Volt Batteries (Cat. No. 230-0553)-power the door/window 
   transmitter and the smoke alarm siren detector

*  Eight C Batteries (Cat. No. 230-0551)-power the base in case of a power
   failure

*  One 12-Volt Battery (Cat. No. 230-0144)-powers the remote control

*  Wire (Cat. No. 278-0862)-connects the door/window transmitter to the
   sensor

*  One UL-Approved Smoke Alarm (Cat. No. 490-0458) works with the supplied
   smoke alarm siren detector

(RLR/jlc-03/22/94)