SR2012 Satellite  (160-2507)     Descrambler Hookup    Faxback Doc. # 8003
System

Note: Our SR2012 receiver has more than enough power for VC2
      (VC2 originally designed for commercial hookup).

For composite video input:

1. Turn "off" TI filter.

2. Connect the: Dish (LNB) to Receiver "C" terminal connection. 
   Receiver's "Descrambler Out" to Descrambler's "Composite Video"
   using an F to RCA adapter 278-255 (changes baseband connection to
   composite type input.
   Descrambler's "VHF Out to TV 
   Descrambler's "VHF In from Ant" to TV ant

3. Set Input switch to the right

4. Set all levels clockwise.

5. Press "SAT/TV" button until first green light comes on. (Satellite
   LED).  This means the VC2 is receiving an encoded signal.
   If no green light appears:
   - not hooked up
   - not enough signal strength from LNB
   - bad cord

6. Turn receiver to a scrambled channel (G1,a 4 Disney) the second green
  light should come on (Videocypher LED).

If this light doesn't light, the VC2 is not receiving data. Check to see if
you have a working dish, and a good strong signal without descrambler
hooked up.

Else will need:
   - Lower temperature LNB or
   - Larger dish

7. Press SET UP and 1 = gives you signal strength of station should be
   35/35 - 50/50 & Unit ID.

    OR

   Press SET UP and 0 = gives you diagnostic data scrambled authorized
   good frame count, audio hold.

If Good Frame Count: counts rapidly, Scrambled Authorized mode stays at SA
and Audio Hold changes.


(jlc-08/16/93)