Model 99  (160-0537)           Viewing TV              Faxback Doc. # 7931

Viewing TV Using the TV's Tuner

Turn off the VCR, or press TV/VCR on the remote until the VCR does not
appear on the VCR's display.  If your TV has A/V inputs, be sure to set it
to the TV mode.  The antenna or cable signals pass through the VCR
unaffected, as if the antenna or cable were connected directly to the TV. 
Use the TV as you normally would.

Viewing TV Using the VCR's Tuner

1.  Turn on the TV and set it to the same channel as the VCR's CHANNEL 3/4
    switch (3 or 4).

    If you are using a TV that is connected to the VCR's AUDIO/VIDEO OUT
    jacks, set the TV to the video mode.

2.  Press VCR on the remote control.

3.  Press TV/VCR until VCR appears on the VCR's display.

4.  Press CHANNEL/TRACKING (CHANNEL on the VCR) \/ or /\, or use the
    remote control's number buttons to select the desired channel.

(ALL-11/10/94)