Auto Range Multimeter (220-0174A) Specifications Faxback Doc. # 7235
DC VOLTS
Accuracy is shown as % of full scale, plus the number of digits between 5%
of range and full scale (except on 1000 V scale).
Ranges Resolution Accuracy
(Maximum Reading)
1000 V 1 V +/-20 V, +/-2 Digits
399.9 V 100 mV +/-1%, +/-2 Digits
39.99 V 10 mV +/-1%, +/-2 Digits
3.999 V 1 mV +/-1%, +/-2 Digits
399.9 mV 100 microV +/-1.5%, +/-2 Digits
Input Impedance:............................10M Ohms in Parallel with 2 pF
Normal Mode Rejection Ratio:..............................> 60 dB at 60 Hz
Response Time to Rated Accuracy:............................2 Seconds Max.
Maximum Input:....................................................1000 VDC
AC VOLTS (True RMS Responding, AC Coupled)
Accuracy is showm as % of full scale, plus the number of digits between
5% of range and full range and full scale (except on 750V scale).
Ranges Resolution Accuracy Accuracy
(Maximum Reading) at 60Hz-1kHz at 30Hz-5kHz
750 V 1 V 30 V, +/-3 45 V, +/-5
399.9 V 100 mV 3%, +/-3 5%, +/-5
39.99 V 10 mV 3%, +/-3 5%, +/-5
3.999 V 1 mV 3%, +/- 5%, +/-5
399.9 mV 100microV 3%, +/-3 - - - - -
Allowable Crest
Factor Range:........Ratio of 1.1 to 3:1 at Full Scale dBm RANGES
Input Range:.............................................+/-60 dBm
Reading Resolution Accuracy at 60 Hz
> + 54 dBm 0.1 dBm +/-.7 dBm
+ 54 to - 27 dBm 0.1 dBm +/-.4 dBm
< - 27 dBm 1 dBm +/-1.2 dBm
Maximum Input Voltage:.................................60 dBm, 1000 V Peak
Input Impedance:.............................1 Mohms in Parallel with 2 pF
DC CURRENT
Range Jack Max Reso- Accuracy
Reading luton
10 A 10A 9.99 A 10 mA +/-3.5%, +/-5 Digits
4 A 10 A 3.999 A 1 mA +/-5.5%, +/-5 Digits
400 mA 400 mA 399.9 mA 100 microA +/-2%, +/-2 Digits
40 mA 400 mA 39.99 mA 10 microA +/-3.5%, +/-2 Digits
4000 microA 400 mA 3.999mA 1 microA +/-2%, +/-2 Digits
400 microA 400 mA 399.9 microA 100nA +/-2%, +/-2 Digits
40 microA 400 mA 39.99 microA 10 nA +/-2%, +/-2 Digits
4 micro A 400 mA 3.999 microA 1 nA +/-2%, +/-2 Digits
AC CURRENT (True RMS Responding, DC Coupled @ 1 KHz)
Range Jack Max Resolu- Accuracy
Reading tion
10.00 A 10 A 9.99 A 10 mA 5.5%, +/-3
4.000 A 10 A 3.999 A 1 mA 7.5%, +/-3
400.0 mA 400 mA 399.9 mA 100 microA 3.5%, +/-3
40.00 mA 400 mA 39.99 mA 10 microA 6.5%, +/-3
4.000 mA 400 mA 3.999mA 1 microA 4%, +/-3
400.0 MicroA 400 mA 399 9 microA 100 nA 4%, +/-3
40.00 microA 400 mA 39.99 micro A 10 nA 4%, +/-3
4.000 microA 400 mA 3.999 microA 1 nA 4%, +/-3
Maximum Allowable DC Level..Less than Full Scale of Range
Allowable Crest Factor Range..........1:1 to 3:1 at Full Scale
RESISTANCE
Ranges Resolution Accuracy
(Maximum Reading)
19.9 Mohms 10 kohms +/-2.5%, +/-3 Digits
3.999 Mohms 1 kohm +/-1%, +/-3 Digits
399.9 kohms 100 Ohms +/-1%, +/-3 Digits
39.99 kohms 10 Ohms +/-1%, +/-3 Digits
3.999 kohms 1 Ohm +/-1%, +/-3 Digits
399.9 Ohms 0.1 Ohm +/-1.5%, +/-3 Digits
Overload Protection......Fused - 500 V AC/DC on All Ranges
In-Circuit Voltage.......0.4 Volts or Less (<0.5V for 399.9 Ohms)
Response Time.............10 Seconds Max. on 20-Mohms Range
2 Seconds Max. on All Other Ranges
CAPACITANCE
Ranges Resolution Accuracy
(Maximum Reading)
399.9 microF 100 nF +/-6%, +/-3 Digits
39.99 microF 10 nF +/-3%, +/-3 Digits
3.999 microF 1 nF +/-2%, +/-3 Digits
399.9 nF 100 pF +/-2%, +/-3 Digits
39.99 nF 10 pF +/-2%, +/-3 Digits
3.999 nF 1 pF +/-3%, +/-3 Digits
FREQUENCY
Ranges Resolution Accuracy
(Max. Readings)
2.000 MHz 1 kHz +/-5%, +/-5 Digits
399.9 kHz 100 Hz +/-3%, +/-1 Digits
39.99 kHz 10 Hz +/-3%, +/-1 Digits
3.999 kHz 1 Hz +/-3%, +/-1 Digits
Input Sensitivity:............................................500 mV p-p
Input Impedance:.........................1 Megohm in Parallel with 50 pf
DIODE TEST
The diode test is performed by measuring the voltage drop across the
diode.
Nominal Current:............................................0.5 mA @ .6V
Overrange:.......................................> 2 VDC to Open Circuit
CONTINUITY TEST
The continuity test is a resistance measurement performed in the 399.9-
ohm range. Open-circuit conditions give an overrange indication.
Beeper operation is automatically enabled.
Continuity is defined if resistance is 50 ohms or less. The beeper sounds
within 150 milliseconds of the reading.
hFE FUNCTION
Direct Reading of hFE from 0 t 39.99K
Emitter Current:..........................................0.5 mA (Approx.)
VCE:....................................Ranges from 1 to 3 Volts (Approx.)
GENERAL SPECIFICATIONS
Temperature Function:
Total Range:................-58 degrees to 302 degrees F (-50 degrees to
150 degrees C)
32 degrees to 212 degrees F
(0 degrees to 100 degrees C) Accuracy:....+/-3.6 degrees F (2 degrees C)
Repeatability Per Probe:...................+/-1.8 degrees F (1 degree C)
Sensor Type:.......................................Thermistor (Supplied)
Normal Sensor Resistance:.......................................10 kohms
Response Time:.......................................5 Seconds (Typical)
(Depends on Contact Quality and Ambient Temperature)
Operating Temperature:..............32 degrees to 122 degrees F (0 degrees
to 50 degrees C)
Storage Temperature:
Without Batteries:.............-20 degrees to 158 degrees F (-29 degrees
to 70 degrees C)
With Batteries:................-20 degrees to 122 degrees F (-29 degrees
to 50 degrees C)
Relative Humidity:
On resistance measurements greater than 1 Mohmns and 400 mVDC, 400 nF
capacitance ranges, relative humidity is up to 80% @ 32 degrees to
95 degrees F (0 degrees to 35 degrees C)
All Other Ranges: UP to 90% @ 32 degrees to 95 degrees F (0 degrees to
35 degrees C)
Up to 70% @ 95 degrees to 122 degrees F (35 degrees to 50 degrees C)
Maximum Common-Mode Voltage:............................500 VDC or Peak AC
Dimensions:.................................8 1/2 x 4 3/4 x 2 11/16 Inches
Weight:................................................1 lb 7 oz (Approx.)
Power Requirements:.........................................6 AA Batteries
Battery Life (Alkaline):.................................500 Hours Minimum
Low-Battery Indication:....................................3.80 V +/-0.1 V
Battery Measurement Frequency:.......................1 Per Minute, Minimum
Standards:....................................................ETL, UL, FCC
(LB/all-07/20/94)