TAD-276  (430-0762)            Voice Stamp            Faxback Doc. # 6371

SETTING THE DAY AND TIME FOR THE VOICE STAMP

Set the day and time so there will be a day and time stamp at the end of
every recorded message.

1.  Press TIME CHECK inside the tape compartment.  The TAD announces
    "Sorry, time is not set."

2.  Press and hold TIME SET.  The TAD announces "Sunday, Monday,
    Tuesday... "Release TIME SET when the TAD announces the correct
    day.

3.  Press TIME CHECK.  The TAD announces the hour "Twelve."

4.  Press and hold TIME SET.  The TAD announces "One, Two... "Release
    TIME SET when the TAD announces the correct hour.

5.  Pres TIME CHECK.  The TAD announces "Oh" for the minute.

6.  Press and hold TIME SET.  The TAD announces "Oh One, Oh Two, Oh 
    Three..." Release TIME SET when the TAD announces the correct
    minute.

7.  Press TIME CHECK.  The TAD announces "AM."  To set a PM hour,
    press TIME SET so the TAD announce "PM."

8.  When you finish setting the day and time, press TIME CHECK.  The
    TAD announces the day and time you set.

NOTE:  If you pause for more than 20 seconds during this procedure, the
       day and time stamp returns to its previous setting.

(CJD/smc-05/11/94)