CGP-220  (260-1268)     Unlocking the Carriage         Faxback Doc. # 5801


Having selected a suitable location for your Printer and connected it to a
power source, the next thing you should do is unlock the carriage and 
uncap the nozzles. Printing will be impossible until this has been done.

1. Turn the power ON.
2. Open the Paper Cover.
3. Press the Green Lever down to position [2] and hold it there for one
   second.
4. Release the Green Lever.
5. The ALERT Indicator will blink for about ten seconds. When it stops
   blinking, lift the Green Lever to position [3].
6. Close the Paper Cover.

LOCKING THE CARRIAGE

If you are going to transport the Printer or leave it unused for a long 
period of time, it is advisable to lock the carriage and cap the ink 
nozzles. Follow this procedure:

1. Turn the power ON.
2. Open the Paper Cover.
3. Press the Green Lever all the way down and hold it there for 1 second.
4. Release the Lever and confirm that it stops at position [1].
5. The ALERT Indicator will blink for about ten seconds. This is normal. 
   After it stops blinking you may turn the power OFF.
6. Close the Paper Cover.

IMPORTANT NOTE: The power must be turned ON when locking the Lever. 
Otherwise the carriage can not be locked properly. If you plan to trans-
port the Printer for a period of time, see Appendix E/Transportation and
Storage for additional instructions.


(smm 08/04/93)