3COM Etherlink Plus Interface  (260-5502)   Features    Faxback Doc. # 5465

* For use in the Tandy 3000 Only    (NOT the Tandy 3000HL)
  Requires a 16-bit bus

Contains an 80186 CPU & buffer memory

Default settings:
  Interrupt 3
  I/O Add. 300H
  DMA channel 1

Recommended settings for the Tandy 3000:
  Interrupt 10, 11, 12, or 15
  DMA channel 5, 6, or 7
  Edit CONFIG.SYS to reflect new setting
  DEVICE=ETH505.SYS  IRQ  I/OBASE  DMA
  (use the letter "x" for default)

MS-DOS Ver. 03.20.02, 25-4103 (Tandy 3000), 25-4070 (Tandy 3000HL)
Includes a new version of ANSI.SYS which must be used in CONFIG.SYS before
running 3Com's menu-driven server setup.

The SERVER (T3000) can be configured w/ up to 2-Meg Expanded Memory that
meets the Lotus/Intel/Microsoft EMS specs.

A Tandy 3000 with hard disk(s) should be equipped with an EtherLink Plus to
provide optimum performance as a share server or other network server.
Also, a Tandy 3000 with EtherLink Plus can be used as a workstation to
provide a user with the best possible performance for intensive applica-
tions.  

The EtherLink Plus is not recommended for installation in a Tandy 3000 HL
due to the HL's 8-bit DMA access. 

(DKH/jlc-03/28/94)