2400 BPS Internal Modem  (25-1037C)   Installation     Faxback Doc. # 5014

Installation Information:

Before installing any board in your computer, you should disconnect all 
power and interface cables from the computer and move your computer to a 
static-free work area. Then, discharge any static buildup by touching a 
grounded metal object. Never power your computer when you have removed its 
case or when you insert or remove option boards.

To install the modem:

1. Remove the screws securing the computer's case and slide off the cover to
   open the computer. Save these screws.

2. Select the expansion slot into which you want to install the modem. The 
   modem card fits into either half- or full-card slots.

3. Remove the slot cover by removing its holding screw and lifting out the
   cover.

4. Press the modem into the expansion slot. Secure the modem using the same
   screw you removed in Step 3.

5. Replace the computer case and secure it with the same screws you removed 
   in Step 1.

6. Connect all interface cables for other peripherals. Then, reconnect your
   computer's power cable.

7. Connect one end of the modular phone cable to a modular phone jack.

8. Connect the other end of the modular phone cable to either of the modem's
   two modular phone connectors.

Note:  You can connect a standard telephone to the second jack on the back 
of the modem. We provided this jack for your convenience so you can continue 
to use your telephone normally. As long as you leave the modem and telephone 
connected, you can continue to use the telephone, even when you turn off the
computer.


(smm 07/28/93)