1200 BPS Internal Modem  (250-1013F)     Install       Faxback Doc. # 4492

INSTALLING THE MODEM

This procedure involves removing the computer's case. If, after reading 
these instructions, you do not feel confident about your ability to install 
the modem, have a qualified Radio Shack service center install the modem 
for you.

Follow the procedure listed below to install your modem:

1. Remove the power cable from your computer.

2. Place your computer in a static-free area.  Before you begin the 
   installation, ground yourself by touching a grounded metal object.

3. Remove the screws securing the computer's case and slide off the cover
   to open the computer. Save these screws.

4. Select the expansion slot into which you want to install the modem.
   Your modem card fits in either half or full card slots.

5. Remove the slot cover by removing its holding screw and lifting out the
   cover.

6. Press the modem into the expansion slot.  SECURE THE MODEM USING THE 
   SAME SCREW YOU REMOVED IN STEP 5.

7. Replace the computer case and secure it with the same screws you 
   removed in Step 3.

8. Connect all interface cables for other peripherals.  Then, reconnect 
   your computer's power cable.

9. Connect one end of the modular phone cable to a modular phone jack.

10.Connect the other end of the modular phone cable to either of the 
   modem's two modular phone connectors.

NOTE: You can connect your standard telephone to the second jack on the 
back of the modem. We provided this jack for your convenience so you can 
continue to use your telephone normally.  As long as you leave your modem 
and telephone connected, you can continue to use your telephone, even when
you turn off your computer.

(abo-07/28/93)