DWP 410  (260-1250)            Self-Test               Faxback Doc. # 4378

Before using the DWP-410, you should perform the Self-Test to ensure that 
the Printer is operating properly. Before running the Self-Test, however, 
you should load wide paper (15") into the Printer.

To run the Self-Test:
1. Set the Printer Power ON/OFF Switch to ON.
2. Set the ON-LINE/OFF-LINE Switch to OFF-LINE.
3. Set the TEST Switch to ON.
4. If necessary adjust the Paper Thickness Adjustment Lever and the Print
Impression Switch for best quality. Open the cover: the Self-Test will stop.
Adjust the Lever and/or Switch. Close the cover and the Self-Test will 
resume.

To end the Self-Test, set the Test Switch to OFF.

(css 07/27/93)