DMP 130A  (260-1280A)          Selftest                Faxback Doc. # 4318

The DMP-130A has a built-in, self-test feature which lets you check the 
print quality and general printer operation before you connect the Printer 
to your computer. This is a good time to check that the print head is adjust-
ed properly (printing is neither too faint nor smudged) and the paper is 
feeding smoothly.

BEFORE running the self-test, be sure to load the DMP-130A with 10-inch 
wide paper since the test prints from one end of the platen to the other. 
Printing on the platen can shorten the life of the platen and the print
head.

TO RUN THE SELF-TEST:

1. Plug the Printer into an AC power outlet.
2. Press and hold either the LINE FEED switch or NLQ switch (see Operator
   Controls).
3. Set the POWER switch to ON. Starting with the "music" of the internal
   buzzer, the Printer will begin printing rolling ASCII 96 characters 
   after the version of the ROM.
   IF YOU press LINE FEED, the self-test is performed in the standard font.
   The correspondence quality font is used during the test when the NLQ 
   switch is pressed.
   PRINTING WILL continue until you press the ON/OFF LINE switch (or paper 
   end is detected).

(css 07/26/93)