DMP 2104 (26-2865)              Pinouts                 Faxback Doc. # 4184

This printer has a 36 pin Centronics connector. (IBM Port)

  Pin     Signal                      Pin      Signal

  1       Strobe*                     19       GND (Return for pin 1)
  2       Data 1                      20       GND (Return for pin 2)
  3       Data 2                      21       GND (Return for pin 3)
  4       Data 3                      22       GND (Return for pin 4)
  5       Data 4                      23       GND (Return for pin 5)
  6       Data 5                      24       GND (Return for pin 6)
  7       Data 6                      25       GND (Return for pin 7)
  8       Data 7                      26       GND (Return for pin 8)
  9       Data 8                      27       GND (Return for pin 9)
  10      Acknowledge*                28       GND (Return for pin 10)
  11      Busy                        29       GND (Return for pin 11)
  12      Paper Empty                 30       GND (Return for pin 12)
  13      Select                      31       Initialize*
  14      Auto Feed*                  32       Error*
  15      N/C                         33       N/C
  16      GND                         34       N/C
  17      Chassis Ground              35       +5.0V
  18      N/C                         36       Select In*

  N/C = Not Connected          * = Active Low Signal

NOTE:  Pins 14 and 36 are used only in Epson mode.