#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#
#$ The Loop Raper's Killit $#
#$ Handbook $#
#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#$#
Written by: Hannibal Lecter
(the real one)
The "elite" disclaimer for the lamer:
This file is written for information purposes only (of course)
and I the author am not responsible for any damage or trouble which
shall be inflicted due to information contained in this file.
Ok, nuff o that shit.
Phreaking has been the most popular skill amoung beginning hackers
since hacking first became the dark side of computer knowledge. It is
a proven fact (says me) that nearly all hackers are acceptable phreakers,
yet not all phreakers are acceptable hackers. I have met many phreaks,
who knew everything I could ever want to know about phreaking, but then
knew absolutely not enough about a Unix (by far the easiest system to hack
other than a DEC server) to save his life. Needless to say, this "expert"
was busted quickly as I expected. One major problem with "phreaks" is that
they have been phreaking so long, that they begin to draw attention to
themselves by 1) Bragging, 2) Using things from their house constantly,
3) Connecting to and brute force hacking a dangerous system directly, due
to lack of hacking knowlege.
Well, If you aren't already wondering, the point of this file is
to give the real hacker some technical knowlege of HARDWIRE phreaking,
as most hackers already know the uses of a PBX, EXTENDER, DIVERTER,
etc. (And so does any code kid)
Hardwire phreaking is very illegal, and if you are caught, it depends
the cop and the excuse, but you may slide right off without ever seeing
a judge, or you may end up in a lot of shit, depending on how you are
percieved by the cop. You may want to dress as NORMAL as possible, to
avoid looking obvious if caught. Dark clothes, but yet normal "clean"
looking clothes are the best by far.
Only bring tools that you can ditch easily, that way you don't look like
you are planning on breaking into some guy's house, or rewire the
entire phone box. Either one is something you don't want someone to suspect
you of. You will not get off easily of either of the two.
Ok, enough of the general shit, here is what you want to know!
This is a brief guide of some of the techniques I have developed myself,
have found them to work quite well, so keep in mind that everything I have
done I will say that I have done it, and everything I haven't done, I will
say so. I am not a liar, and I want you to be safe, so i don't want you
trying some bullshyt and getting yourself caught.
THE LOOP TAP:
"""""""""""""
This is a very easy way to bug someone, but be carefull, as the phone
company may find it if you leave it too long, because the loops are used
frequently by telco employees, not to mention some pissed off guy who has
had is phone fuked up all night.
Ingredients:
""""""""""""
1 1.5k resistor
1 1k resistor
4 alligator clips
1 1ft piece of insulated wire
1 beige box (yeah a phone w/aligator clips duh)
O O Tapped line \
| |
/ | Lines bridged with 1.5k
1.5k\ | resistor
/ |
| 1k /
O/\/\/O Looped line tied w/1k resistor
Ok, what you are going to do here is basically cut the wire in half,
and solder and aligator clip to one end of each of the wires. Now solder
the other two ends (that you havent done anything with) to the ends of the
resistor. This is one of the main ingredients for all types of field
phreaking. (remember that) Now solder the other two alligator clips to
each end of the 1k resistor.
Now I am assuming that you have already been inside a phone box,
(if not you can find them alleys mounted to a telephone pole, or sometimes
behind a bush, standing upright from the ground about 3ft tall) and know
something about them. When you open the box, and see the rows of terminals,
you want to take your phone, and find the line you wish to tap. If you
aren't somewhere in the person's alley, you aren't at the right box, so
quit reading this and go jump off a cliff. Anyways, open the box (a flathead
screwdriver jammed inbetween the guard ring and the flat side of the nut
will open it quickly and quietly) and start running down the rows calling ANI
numbers looking for your girlfriends er I mean victim's line. When you
find the right line, remember it!! I usually just replace all the terminal
covers as I go except the right one. Now pick another line, (that you
already went down looking for the last number) and call a loop on this line
(not the line you want to tap) and connect the 1k resistor accross the
terminals. What this does is hold the line open, so that you can meet
up with it on the other end of the loop. Now connect the 1.5k resistor
from the ring of the tied down line, to the ring og the line you wish
to tap. The ring (in case you are just a lame warez kid or something)
is the red, which is usually the side that is NOT grounded to the chassis
of the box. I think it's the right, but I may be wrong. All I know is
it is the positive side, which if you have a good test phone, will light
when you have it hooked right, therefore you know then which side is RING
and which side is TIP by the color of the wires on your phone.
Anyways, what you have now is a line which is on one side of the loop,
preferably the QUIET side. (I'll tell you why in a minute) Now what you
do is go home, call the other end of the loop, and you will be able to
hear faintly the conversation (if any) over the loop. If you dont hear
anything, then that means there is not conversation (ie no connection,
therefore the phone is still on hook, so you won't hear a dialtone (thanks
to the 1.5k resistor)). If you hear a LOUD tone (this is why we used the
quiet end of the loop), then you did something wrong, and the line
you connected to the loop isn't open anymore, so you may want to go back
and try a different resistor. (smaller) The best way to check is to call
it from the box, using another line, just to be sure. That way you don't
have to wait until you get home.
It is best not to leave this on for more than one full night, because
in the morning, the telco guy is gonna come to fix it. Nobody is gonna
be able to do anything until morning, so your pretty safe for a night.
Just make sure you put everything back the way it was when you are done,
and don't forget the fucking plastic cover caps!!!!!
If you feel like you want to have this gizmo hooked up longer, what
could do is move the wires of the line you are calling the loop with to
another set of terminals. If you put a hmmm not sure, maybe 5k resistor
across the terminals of the line that you moved him to, it MAY drop the
voltage of the ring enough to disable a ring from incomming calls. There-
fore neither person gets calls, but they can both make calls. So they
never notice anything weird until they both pick up at the same time.
Just an idea, sorry.
This tap has worked for me many times. I have never left it for more
than one night, and I wouldn't advise doing so unless you are positive
someone isn't going to use the loop-connected line for a few days.
THE LINE THIEF:
"""""""""""""""
This is really not usefull at all, but it can be if you decide
to make it usefull. However to choose to make it usefull is up to
you. What you will need for this is the following:
4 alligator clips
2 pieces of insulated wire (red and black)
2 1k resistors (optional)
1 Test Phone
Solder the clips to the ends of the wires. Now strip the middle of the
wires, and solder each end of the resistor into the middle of each of the
wires. It should look like an H. Now go to the person's alley (or main box)
in which you want to do your damage, and find the box which contains
their terminals. Call a neat-o 1-900-sex-gang number or even better, an
automated converence line such as the At&t conference.
Connect you test phone to the person's line (I am assuming you already
found the line using an ANI demo and a little time calling it on all the
lines) and call the number you wanna call on his line. Hopefully something
something extremely expensive. Once you connect to what you are calling
connect the red and black wires to the terminals. You should hear the
volume drop, but the line should still be audible. Hang up the phone, and
then pick up again, and you should still hear the line conversation. If not,
use a resistor of a little less value. If you called a conference line,
this is a the best time to call a few people and transfer control. If you
don't want to transfer control you can just leave it, and keep control from
your loop you are about to wire in. Now disconnect your test phone,
leaving the wires clipped in place, and connect to another line. Call a
local loop, and connect the other two clips to the line. What you should
have now is two wires connecting the two lines directly with a 1k resistor
in between them. It should look like an H like this:
O O Target line
| 1k |
}\/\/{
| |
O O Loop line
Now what you have is a complete call from the victim line (target
line) to wherever you wanted. The loop line has now been connected with
a loop. Both lines are being held open by the resistor which is shared
between the two. Hopefully you called the quiet end of the loop so that
you don't kill everyone in the conference, and so you can check it from
home to make sure it's still there. No guessing here, if you get the
loud loop tone when you call, it's gone, so start being paranoid.
It is best that you remove this thing when you are done. Hopefully
before daylight.
THE WOW TOOL:
"""""""""""""
The wow tool is something I thought up one day when bullshiting
with Dr. Delam, and Trouble. We were thinking of ways to take down
lame ass warez boards, and were trying to fgure out how to get a high
enough voltage. One theory was to use a stun gun, and run directly
down the terminals, hopefully frying the modem.
The stun gun theory was a very good idea, but the problem was buying
a $40 stun gun. We had to find something that was well over 120v DC
because this is the standard ring voltage of the phone line.
The new idea struck my in the forehead, so here it is:
An automobile ignition coil is only about $10, and it will easily
supply the nessessary voltage to take out the modem, answering machines,
and possibly te serial port of the computer! Here's the schematics:
___________
| |+
| ))))))))o-|
| )COIL)))]---------< Alligator clip
| ))))))))o - ---< alligator clip
|____ | |
| o- SPST 12v switch |
+| | - -< alligator clip
12v car or small
motorcycle battery
Ok, what you have here is the coil, with positive connected to the
positive of the car battery. A few motorcycle batterys in parallel will
work better since they are smaller, but they wont last as long. I
prefer motorcycle batteries. Now run the negative to a SPST switch,
and the other terminal of the switch to the negative of the battery.
MAKE SURE IT'S OFF!!!
Ok, now run one wire (this may be tricky) from the center lug, which
is actually a hole with a metal cup inside, and connect an alligator clip
to the other end. Make it long enough to reach from possibly a backpack
to the phone box. You will now need another wire with an alligator clip
on each end.
USING THE WOW TOOL:
"""""""""""""""""""
Open the box and connect the clip from the tool to the RING of the
the phone line. This is the positive, and it MUST be the positive.
now connect the two clip wire, with on clip to the other terminal (TIP)
and the other clip to ground (the frame of the box).
Connect a test phone and call the number you are trying to kill,
and hang up. Disconnect your phone. When you hear it stop ringing,
this means the modem or person, or answering machine has answered.
Flip the switch and laugh your ass off, cause there should be some smoke
in there any minute!!!! Heh...well, needless to say, run it for about
15 seconds, and the get the fuck out of there. Make sure nobody sees you,
cause what you are doing is a federal offense. (Funny as shit though :)
Well, that's it for now, have phun, and don't do anything I
wouldn't do ... Heh...um yeah...
Quick greets going to (but of course)
Dr. Delam (hurry back)
Trouble (Pussy whipped)
Kaleidox (whats up?)
And all the other cool guys...like AJAX (not even)
Don't brag, you get yourself in trouble. All the hackers I know that have
been busted, had it happen due to bragging. So watch it guys.
Be safe.