| Date: Thu, 13 Oct 2016 16:28:50 +0200
Add missing device path to '-l' example
Also, it's ttyS0 not ttySO.
Diffstat:
st.1 | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- |
| @@ -96,18 +96,18 @@ use a tty
.I line
instead of a pseudo terminal.
.I line
-should be a (pseudo-)serial device (e.g. /dev/ttySO on Linux for serial port
+should be a (pseudo-)serial device (e.g. /dev/ttyS0 on Linux for serial port
0).
When this flag is given
remaining arguments are used as flags for
.BR stty(1).
By default st initializes the serial line to 8 bits, no parity, 1 stop bit
and a 38400 baud rate. The speed is set by appending it as last argument
-(e.g. 'st -l 115200'). Arguments before the last one are
+(e.g. 'st -l /dev/ttyS0 115200'). Arguments before the last one are
.BR stty(1)
flags. If you want to set odd parity on 115200 baud use for example 'st -l
-parenb parodd 115200'. Set the number of bits by using for example 'st -l cs7
-115200'. See
+/dev/ttyS0 parenb parodd 115200'. Set the number of bits by using for
+example 'st -l /dev/ttyS0 cs7 115200'. See
.BR stty(1)
for more arguments and cases.
.TP |