Internet Engineering Task Force (IETF) R. Housley
Request for Comments: 7696 Vigil Security
BCP: 201 November 2015
Category: Best Current Practice
ISSN: 2070-1721
Guidelines for Cryptographic Algorithm Agility
and Selecting Mandatory-to-Implement Algorithms
Abstract
Many IETF protocols use cryptographic algorithms to provide
confidentiality, integrity, authentication, or digital signature.
Communicating peers must support a common set of cryptographic
algorithms for these mechanisms to work properly. This memo provides
guidelines to ensure that protocols have the ability to migrate from
one mandatory-to-implement algorithm suite to another over time.
Status of This Memo
This memo documents an Internet Best Current Practice.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
BCPs is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc7696.
Copyright Notice
Copyright (c) 2015 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Housley Best Current Practice [Page 1]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
2. Algorithm Agility Guidelines . . . . . . . . . . . . . . . . . 3
2.1. Algorithm Identifiers . . . . . . . . . . . . . . . . . . 4
2.2. Mandatory-to-Implement Algorithms . . . . . . . . . . . . 5
2.2.1. Platform Specifications . . . . . . . . . . . . . . . 5
2.2.2. Cryptographic Key Size . . . . . . . . . . . . . . . . 5
2.2.3. Providing Notice of Expected Changes . . . . . . . . . 6
2.3. Transitioning from Weak Algorithms . . . . . . . . . . . . 6
2.4. Algorithm Transition Mechanisms . . . . . . . . . . . . . 7
2.5. Cryptographic Key Management . . . . . . . . . . . . . . . 8
2.6. Preserving Interoperability . . . . . . . . . . . . . . . 8
2.7. Balancing Security Strength . . . . . . . . . . . . . . . 9
2.8. Balancing Protocol Complexity . . . . . . . . . . . . . . 10
2.9. Opportunistic Security . . . . . . . . . . . . . . . . . . 10
3. Cryptographic Algorithm Specifications . . . . . . . . . . . . 11
3.1. Choosing Mandatory-to-Implement Algorithms . . . . . . . . 11
3.2. Too Many Choices Can Be Harmful . . . . . . . . . . . . . 12
3.3. Picking One True Cipher Suite Can Be Harmful . . . . . . . 13
3.4. National Cipher Suites . . . . . . . . . . . . . . . . . . 14
4. Security Considerations . . . . . . . . . . . . . . . . . . . 14
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 16
6. Normative References . . . . . . . . . . . . . . . . . . . . . 16
7. Informative References . . . . . . . . . . . . . . . . . . . . 16
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . 19
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 19
1. Introduction
Many IETF protocols use cryptographic algorithms to provide
confidentiality, integrity, authentication, or digital signature.
For interoperability, communicating peers must support a common set
of cryptographic algorithms. In most cases, a combination of
compatible cryptographic algorithms will be used to provide the
desired security services. The set of cryptographic algorithms being
used at a particular time is often referred to as a cryptographic
algorithm suite or cipher suite. In a protocol, algorithm
identifiers might name a single cryptographic algorithm or a full
suite of algorithms.
Cryptographic algorithms age; they become weaker with time. As new
cryptanalysis techniques are developed and computing capabilities
improve, the work required to break a particular cryptographic
algorithm will reduce, making an attack on the algorithm more
feasible for more attackers. While it is unknown how cryptoanalytic
attacks will evolve, it is certain that they will get better. It is
Housley Best Current Practice [Page 2]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
unknown how much better they will become or when the advances will
happen. Protocol designers need to assume that advances in computing
power or advances in cryptoanalytic techniques will eventually make
any algorithm obsolete. For this reason, protocols need mechanisms
to migrate from one algorithm suite to another over time.
Algorithm agility is achieved when a protocol can easily migrate from
one algorithm suite to another more desirable one, over time. For
the protocol implementer, this means that implementations should be
modular to easily accommodate the insertion of new algorithms or
suites of algorithms. Ideally, implementations will also provide a
way to measure when deployed implementations have shifted away from
the old algorithms and to the better ones. For the protocol
designer, algorithm agility means that one or more algorithm or suite
identifiers must be supported, the set of mandatory-to-implement
algorithms will change over time, and an IANA registry of algorithm
identifiers will be needed.
Algorithm identifiers by themselves are not sufficient to ensure easy
migration. Action by people that maintain implementations and
operate services is needed to develop, deploy, and adjust
configuration settings to enable the new more desirable algorithms
and to deprecate or disable older, less desirable ones. For various
reasons, most notably interoperability concerns, experience has shown
that it has proven difficult for implementers and administrators to
remove or disable weak algorithms. Further, the inability of legacy
systems and resource-constrained devices to support new algorithms
adds to those concerns. As a result, people live with weaker
algorithms, sometimes seriously flawed ones, well after experts
recommend migration.
1.1. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
2. Algorithm Agility Guidelines
These guidelines are for use by IETF working groups and protocol
authors for IETF protocols that make use of cryptographic algorithms.
Past attempts at algorithm agility have not been completely
successful, and this section provides some insights from those
experiences.
Housley Best Current Practice [Page 3]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
2.1. Algorithm Identifiers
IETF protocols that make use of cryptographic algorithms MUST support
one or more algorithms or suites. The protocol MUST include a
mechanism to identify the algorithm or suite that is being used. An
algorithm identifier might be explicitly carried in the protocol.
Alternatively, a management mechanism can be used to identify the
algorithm. For example, an entry in a key table that includes a key
value and an algorithm identifier might be sufficient.
If a protocol does not carry an algorithm identifier, then the
protocol version number or some other major change is needed to
transition from one algorithm to another. The inclusion of an
algorithm identifier is a minimal step toward cryptographic algorithm
agility.
Sometimes a combination of protocol version number and explicit
algorithm or suite identifiers is appropriate. For example, the
Transport Layer Security (TLS) [RFC5246] version number names the
default key derivation function, and the cipher suite identifier
names the rest of the needed algorithms.
Some approaches carry one identifier for each algorithm that is used.
Other approaches carry one identifier for a full suite of algorithms.
Both approaches are used in IETF protocols. Designers are encouraged
to pick one of these approaches and use it consistently throughout
the protocol or family of protocols. Suite identifiers make it
easier for the protocol designer to ensure that the algorithm
selections are complete and compatible for future assignments.
However, suite identifiers inherently face a combinatoric explosion
as new algorithms are defined. Algorithm identifiers, on the other
hand, impose a burden on implementations by forcing a determination
at run-time regarding which algorithm combinations are acceptable.
Regardless of the approach used, protocols historically negotiate the
symmetric cipher and cipher mode together to ensure that they are
compatible.
In the IPsec protocol suite, the Internet Key Exchange Protocol
version 2 (IKEv2) [RFC7296] carries the algorithm identifiers for the
Authentication Header (AH) [RFC4302] and the Encapsulating Security
Payload (ESP) [RFC4303]. Such separation is a completely fine design
choice. In contrast, TLS [RFC5246] carries cipher suite identifiers,
which is also a completely fine design choice.
Housley Best Current Practice [Page 4]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
An IANA registry SHOULD be used for these algorithm or suite
identifiers. Once an algorithm identifier is added to the registry,
it should not be changed or removed. However, it is desirable to
mark a registry entry as deprecated when implementation is no longer
advisable.
2.2. Mandatory-to-Implement Algorithms
For secure interoperability, BCP 61 [RFC3365] recognizes that
communicating peers that use cryptographic mechanisms must support a
common set of strong cryptographic algorithms. For this reason, IETF
protocols that employ cryptography MUST specify one or more strong
mandatory-to-implement algorithms or suites. This does not require
all deployments to use this algorithm or suite, but it does require
that it be available to all deployments.
The IETF needs to be able to change the mandatory-to-implement
algorithms over time. It is highly desirable to make this change
without updating the base protocol specification. To achieve this
goal, it is RECOMMENDED that the base protocol specification includes
a reference to a companion algorithms document, allowing the update
of one document without necessarily requiring an update to the other.
This division also facilitates the advancement of the base protocol
specification on the standards maturity ladder even if the algorithm
document changes frequently.
The IETF SHOULD keep the set of mandatory-to-implement algorithms
small. To do so, the set of algorithms will necessarily change over
time, and the transition SHOULD happen before the algorithms in the
current set have weakened to the breaking point.
2.2.1. Platform Specifications
Note that mandatory-to-implement algorithms or suites are not
specified for protocols that are embedded in other protocols; in
these cases, the system-level protocol specification identifies the
mandatory-to-implement algorithm or suite. For example, S/MIME
[RFC5751] makes use of the cryptographic message Syntax (CMS)
[RFC5652], and S/MIME specifies the mandatory-to-implement
algorithms, not CMS. This approach allows other protocols to make
use of CMS and make different mandatory-to-implement algorithm
choices.
2.2.2. Cryptographic Key Size
Some cryptographic algorithms are inherently tied to a specific key
size, but others allow many different key sizes. Likewise, some
algorithms support parameters of different sizes, such as integrity
Housley Best Current Practice [Page 5]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
check values or nonces. The algorithm specification MUST identify
the specific key sizes and parameter sizes that are to be supported.
When more than one key size is available, expect the mandatory-to-
implement key size to increase over time.
Guidance on cryptographic key size for asymmetric keys can be found
in BCP 86 [RFC3766].
Guidance on cryptographic key size for symmetric keys can be found in
BCP 195 [RFC7525].
2.2.3. Providing Notice of Expected Changes
Fortunately, algorithm failures without warning are rare. More
often, algorithm transition is the result of age. For example, the
transition from DES to Triple-DES to AES took place over decades,
causing a shift in symmetric block cipher strength from 56 bits to
112 bits to 128 bits. Where possible, authors SHOULD provide notice
to implementers about expected algorithm transitions. One approach
that was first used in RFC 4307 [RFC4307] is to use SHOULD+, SHOULD-,
and MUST- in the specification of algorithms. The definitions below
are slightly modified from those in RFC 4307.
SHOULD+ This term means the same as SHOULD. However, it is
likely that an algorithm marked as SHOULD+ will be
promoted to a MUST in the future.
SHOULD- This term means the same as SHOULD. However, it is
likely that an algorithm marked as SHOULD- will be
deprecated to a MAY or worse in the future.
MUST- This term means the same as MUST. However, it is
expected that an algorithm marked as MUST- will be
downgraded in the future. Although the status of the
algorithm will be determined at a later time, it is
reasonable to expect that a the status of a MUST-
algorithm will remain at least a SHOULD or a SHOULD-.
2.3. Transitioning from Weak Algorithms
Transition from an old algorithm that is found to be weak can be
tricky. It is of course straightforward to specify the use of a new,
better algorithm. And then, when the new algorithm is widely
deployed, the old algorithm ought no longer be used. However,
knowledge about the implementation and deployment of the new
algorithm will always be imperfect, so one cannot be completely
assured of interoperability with the new algorithm.
Housley Best Current Practice [Page 6]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
Algorithm transition is naturally facilitated as part of an algorithm
selection or negotiation mechanism. Protocols traditionally select
the best algorithm or suite that is supported by all communicating
peers and acceptable by their policies. In addition, a mechanism is
needed to determine whether the new algorithm has been deployed. For
example, SMIMECapabilities [RFC5751] allows S/MIME mail user agents
to share the list of algorithms that they are willing to use in
preference order. For another example, the DNSSEC EDNS0 option
[RFC6975] measures the acceptance and use of new digital signing
algorithms.
In the Resource Public Key Infrastructure (RPKI), a globally
recognized digital signature is needed. BCP 182 [RFC6916] provides
an approach to transition, where a second signature algorithm is
introduced and then the original one is phased out.
In the worst case, the old algorithm may be found to be tragically
flawed, permitting a casual attacker to download a simple script to
break it. Sadly, this has happened when a secure algorithm is used
incorrectly or used with poor key management, resulting in a weak
cryptographic algorithm suite. In such situations, the protection
offered by the algorithm is severely compromised, perhaps to the
point that one wants to stop using the weak suite altogether,
rejecting offers to use the weak suite well before the new suite is
widely deployed.
In any case, there comes a point in time where one refuses to use the
old, weak algorithm or suite. This can happen on a flag day, or each
installation can select a date on their own.
2.4. Algorithm Transition Mechanisms
Cryptographic algorithm selection or negotiation SHOULD be integrity
protected. If selection is not integrity protected, then the
protocol will be subject to a downgrade attack. Without integrity
protection of algorithm or suite selection, the attempt to transition
to a new algorithm or suite may introduce new opportunities for
downgrade attacks.
Transition mechanisms need to consider the algorithm that is used to
provide integrity protection for algorithm negotiation itself.
If a protocol specifies a single mandatory-to-implement integrity
algorithm, eventually that algorithm will be found to be weak.
Housley Best Current Practice [Page 7]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
Extra care is needed when a mandatory-to-implement algorithm is used
to provide integrity protection for the negotiation of other
cryptographic algorithms. In this situation, a flaw in the
mandatory-to-implement algorithm may allow an attacker to influence
the choices of the other algorithms.
2.5. Cryptographic Key Establishment
Traditionally, protocol designers have avoided more than one approach
to exchanges that establish cryptographic keys because it makes the
security analysis of the overall protocol more difficult. When
frameworks such as the Extensible Authentication Protocol (EAP)
[RFC3748] and Simple Authentication and Security Layer (SASL)
[RFC4422] are employed, key establishment is very flexible, often
hiding many of the details from the application. This results in
protocols that support multiple key establishment approaches. In
fact, the key establishment approach itself is negotiable, which
creates a design challenge to protect the negotiation of the key
establishment approach before it is used to produce cryptographic
keys.
Protocols can negotiate a key establishment approach, derive an
initial cryptographic key, and then authenticate the negotiation.
However, if the authentication fails, the only recourse is to start
the negotiation over from the beginning.
Some environments will restrict the key establishment approaches by
policy. Such policies tend to improve interoperability within a
particular environment, but they cause problems for individuals that
need to work in multiple incompatible environments.
2.6. Preserving Interoperability
Cryptographic algorithm deprecation is very difficult. People do not
like to introduce interoperability problems, even to preserve
security. As a result, flawed algorithms are supported for far too
long. The impact of legacy software and long support tails on
security can be reduced by making it easy to transition from old
algorithms and suites to new ones. Social pressure is often needed
to cause the transition to happen.
Implementers have been reluctant to remove deprecated algorithms or
suites from server software, and server administrators have been
reluctant to disable them over concerns that some party will no
longer have the ability to connect to their server. Implementers and
administrators want to improve security by using the best supported
algorithms, but their actions are tempered by the desire to preserve
connectivity. Recently, some browser vendors have started to provide
Housley Best Current Practice [Page 8]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
visual warnings when a deprecated algorithm or suite is used. These
visual warnings provide a new incentive to transition away from
deprecated algorithms and suites, prompting customers to ask for
improved security.
Transition in Internet infrastructure is particularly difficult. The
digital signature on the certificate for an intermediate
certification authority (CA) [RFC5280] is often expected to last
decades, which hinders the transition away from a weak signature
algorithm or short key length. Once a long-lived certificate is
issued with a particular signature algorithm, that algorithm will be
used by many relying parties, and none of them can stop supporting it
without invalidating all of the subordinate certificates. In a
hierarchical system, many subordinate certificates could be impacted
by the decision to drop support for a weak signature algorithm or an
associated hash function.
Organizations that have a significant influence can assist by
coordinating the demise of an algorithm suite, making the transition
easier for their own users as well as others.
2.7. Balancing Security Strength
When selecting or negotiating a suite of cryptographic algorithms,
the strength of each algorithm SHOULD be considered. The algorithms
in a suite SHOULD be roughly equal by providing comparable best-known
attack work factors. However, the security service provided by each
algorithm in a particular context needs to be considered when making
the selection. Algorithm strength needs to be considered at the time
a protocol is designed. It also needs to be considered at the time a
protocol implementation is deployed and configured. Advice from
experts is useful, but, in reality, such advice is often unavailable
to system administrators that are deploying a protocol
implementation. For this reason, protocol designers SHOULD provide
clear guidance to implementers, leading to balanced options being
available at the time of deployment.
Performance is always a factor is selecting cryptographic algorithms.
Performance and security need to be balanced. Some algorithms offer
flexibility in their strength by adjusting the key size, number of
rounds, authentication tag size, prime group size, and so on. For
example, TLS cipher suites include Diffie-Hellman or RSA without
specifying a particular public key length. If the algorithm
identifier or suite identifier named a particular public key length,
migration to longer ones would be more difficult. On the other hand,
inclusion of a public key length would make it easier to migrate away
from short ones when computational resources available to attacker
dictate the need to do so. The flexibility on asymmetric key length
Housley Best Current Practice [Page 9]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
has led to interoperability problems, and to avoid these problems in
the future any aspect of the algorithm not specified by the algorithm
identifiers need to be negotiated, including key size and parameters.
In CMS [RFC5652], a previously distributed symmetric key-encryption
key can be used to encrypt a content-encryption key, which in turn is
used to encrypt the content. The key-encryption and content-
encryption algorithms are often different. If, for example, a
message content is encrypted with a 128-bit AES key and the content-
encryption key is wrapped with a 256-bit AES key, then at most 128
bits of protection is provided. In this situation, the algorithm and
key size selections should ensure that the key encryption is at least
as strong as the content encryption. In general, wrapping one key
with another key of a different size yields the security strength of
the shorter key.
2.8. Balancing Protocol Complexity
Protocol designs need to anticipate changes in the supported
cryptographic algorithm set over time. There are a number of ways to
enable the transition, and Section 3 discusses some of the related
issues.
Keep implementations as simple as possible. Complex protocol
negotiation provides opportunities for attack, such as downgrade
attacks. Support for many algorithm alternatives is also harmful.
Both of these can lead to portions of the implementation that are
rarely used, increasing the opportunity for undiscovered exploitable
implementation bugs.
2.9. Opportunistic Security
Despite the guidance in Section 2.4, opportunistic security [RFC7435]
also deserves consideration, especially at the time a protocol
implementation is deployed and configured. Opportunistic security,
like other reasons for encrypting traffic, needs to make use of the
strongest encryption algorithms that are implemented and allowed by
policy. When communicating parties do not have strong algorithms in
common, using algorithms that are weak against advanced attackers but
sufficient against others is one way to make pervasive surveillance
significantly more difficult. As a result, when communicating
parties do not have strong algorithms in common, algorithms that
would not be acceptable in many negotiated situations are acceptable
for opportunistic security when legacy systems are in use for
unauthenticated encrypted sessions (as discussed in Section 3 of
[RFC7435]) as long as their use does not facilitate downgrade
attacks. Similarly, weaker algorithms and shorter key sizes are also
acceptable for opportunistic security with the same constraints.
Housley Best Current Practice [Page 10]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
That said, the use of strong algorithms is always preferable.
3. Cryptographic Algorithm Specifications
There are tradeoffs between the number of cryptographic algorithms
that are supported and the time to deploy a new algorithm. This
section provides some of the insights about the tradeoff faced by
protocol designers.
Ideally, two independent sets of mandatory-to-implement algorithms
will be specified, allowing for a primary suite and a secondary
suite. This approach ensures that the secondary suite is widely
deployed if a flaw is found in the primary one.
3.1. Choosing Mandatory-to-Implement Algorithms
It may seem as if the ability to use an algorithm of one's own
choosing is very desirable; however, the selection is often better
left to experts. When there are choices, end-users might select
between configuration profiles that have been defined by experts.
Further, experts need not specify each and every cryptographic
algorithm alternative. Specifying all possible choices will not lead
to them all being available in every implementation. Mandatory-to-
implement algorithms MUST have a stable public specification and
public documentation that has been well studied, giving rise to
significant confidence. The IETF has always had a preference for
unencumbered algorithms. There are significant benefits in selecting
algorithms and suites that are widely deployed. The selected
algorithms need to be resistant to side-channel attacks and also meet
the performance, power, and code size requirements on a wide variety
of platforms. In addition, inclusion of too many alternatives may
add complexity to algorithm selection or negotiation. Specification
of too many alternatives will likely hamper interoperability and may
hamper security as well. When specifying new algorithms or suites,
protocol designers would be prudent to consider whether existing ones
can be deprecated.
There is significant benefit in selecting the same algorithms and
suites for different protocols. Using the same algorithms can
simplify implementation when more than one of the protocols is used
in the same device or system.
Sometimes more than one mandatory-to-implement algorithm is needed to
increase the likelihood of interoperability among a diverse
population. For example, authenticated encryption is provided by
AES-CCM [RFC3610] and AES-GCM [GCM]. Both of these algorithms are
considered to be secure. AES-CCM is available in hardware used by
many small devices, and AES-GCM is parallelizable and well suited to
Housley Best Current Practice [Page 11]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
high-speed devices. Therefore, an application needing authenticated
encryption might specify one of these algorithms or both of these
algorithms, depending on the population.
3.2. Too Many Choices Can Be Harmful
It is fairly easy to specify the use of any arbitrary cryptographic
algorithm, and once the specification is available, the algorithm
gets implemented and deployed. Some people say that the freedom to
specify algorithms independently from the rest of the protocol has
led to the specification of too many cryptographic algorithms. Once
deployed, even with moderate uptake, it is quite difficult to remove
algorithms because interoperability with some party will be impacted.
As a result, weaker ciphers stick around far too long. Sometimes
implementers are forced to maintain cryptographic algorithm
implementations well beyond their useful lifetime.
In order to manage the proliferation of algorithm choices and provide
an expectation of interoperability, many protocols specify mandatory-
to-implement algorithms or suites. All implementers are expected to
support the mandatory-to-implement cryptographic algorithm, and they
can include any others algorithms that they desire. The mandatory-
to-implement algorithms are chosen to be highly secure and follow the
guidance in RFC 1984 [RFC1984]. Of course, many other factors,
including intellectual property rights, have an impact on the
cryptographic algorithms that are selected by the community.
Generally, the mandatory-to-implement algorithms ought to be
preferred, and the other algorithms ought to be selected only in
special situations. However, it can be very difficult for a skilled
system administrator to determine the proper configuration to achieve
these preferences.
In some cases, more than one mandatory-to-implement cryptographic
algorithm has been specified. This is intended to ensure that at
least one secure cryptographic algorithm will be available, even if
other mandatory-to-implement algorithms are broken. To achieve this
goal, the selected algorithms must be diverse, so that a
cryptoanalytic advance against one of the algorithms does not also
impact the other selected algorithms. The idea is to have an
implemented and deployed algorithm as a fallback. However, all of
the selected algorithms need to be routinely exercised to ensure
quality implementation. This is not always easy to do, especially if
the various selected algorithms require different credentials.
Obtaining multiple credentials for the same installation is an
unacceptable burden on system administrators. Also, the manner by
which system administrators are advised to switch algorithms or
suites is, at best, ad hoc and, at worst, entirely absent.
Housley Best Current Practice [Page 12]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
3.3. Picking One True Cipher Suite Can Be Harmful
In the past, protocol designers have chosen one cryptographic
algorithm or suite, and then tied many protocol details to that
selection. Plan for algorithm transition, either because a mistake
is made in the initial selection or because the protocol is
successfully used for a long time and the algorithm becomes weak with
age. Either way, the design should enable transition.
Protocol designers are sometimes misled by the simplicity that
results from selecting one true algorithm or suite. Since algorithms
age, the selection cannot be stable forever. Even the most simple
protocol needs a version number to signal which algorithm is being
used. This approach has at least two desirable consequences. First,
the protocol is simpler because there is no need for algorithm
negotiation. Second, system administrators do not need to make any
algorithm-related configuration decisions. However, the only way to
respond to news that an algorithm that is part of the one true cipher
suite has been broken is to update the protocol specification to the
next version, implement the new specification, and then get it
deployed.
The first IEEE 802.11 [WiFi] specification included Wired Equivalent
Privacy (WEP) as the only encryption technique. Many of the protocol
details were driven by the selected algorithm. WEP was found to be
quite weak [WEP], and a very large effort was needed to specify,
implement, and deploy the alternative encryption techniques. This
effort was made even harder by the protocol design choices that were
tied to the initial algorithm selection and the desire for backward
compatibility.
Experience with the transition from SHA-1 to SHA-256 indicates that
the time from protocol specification to widespread use takes more
than five years. In this case, the protocol specifications and
implementation were straightforward and fairly prompt. In many
software products, the new algorithm was not considered an update to
the existing release, so the roll-out of the next release, subsequent
deployment, and finally adjustment of the configuration by system
administrators took many years. In many consumer hardware products,
firmware to implement the new algorithm was difficult to locate and
install, or it was simply not available. Further, infrastructure
providers were unwilling to make the transition until all of their
potential clients were able to use the new algorithm.
Housley Best Current Practice [Page 13]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
3.4. National Cipher Suites
Some nations specify cryptographic algorithms, and then require their
use through legislation or regulations. These algorithms may not
have wide public review, and they can have limited geographic scope
in their deployment. Yet, the legislative or regulatory mandate
creates a captive market. As a result, such algorithms will get
specified, implemented, and deployed. The default server or
responder configuration SHOULD disable such algorithms; in this way,
explicit action by the system administrator is needed to enable them
where they are actually required. For tiny devices with no user
interface, an administrator action may only be possible at the time
the device is purchased.
National algorithms can force an implementer to produce several
incompatible product releases for different countries or regions;
this has significantly greater cost over development of a product
using a globally acceptable algorithm. This situation could be even
worse if the various national algorithms impose different
requirements on the protocol, its key management, or its use of
random values.
4. Security Considerations
This document provides guidance to working groups and protocol
designers. The security of the Internet is improved when broken or
weak cryptographic algorithms can be easily replaced with strong
ones.
From a software development and maintenance perspective,
cryptographic algorithms can often be added and removed without
making changes to surrounding data structures, protocol parsing
routines, or state machines. This approach separates the
cryptographic algorithm implementation from the rest of the code,
which makes it easier to tackle special security concerns such as key
exposure and constant-time execution.
Sometimes application-layer protocols can make use of transport-layer
security protocols, such as TLS [RFC5246] or Datagram TLS (DTLS)
[RFC6347]. This insulates the application-layer protocol from the
details of cryptography, but it is likely to still be necessary to
handle the transition from unprotected traffic to protected traffic
in the application-layer protocol. In addition, the application-
layer protocol may need to handle the downgrade from encrypted
communication to plaintext communication.
Housley Best Current Practice [Page 14]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
Hardware offers challenges in the transition of algorithms, for both
tiny devices and very high-end data center equipment. Many tiny
devices do not include the ability to update the firmware at all.
Even if the firmware can be updated, tiny devices are often deployed
in places that make it very inconvenient to do so. High-end data
center equipment may use special-purpose chips to achieve very high
performance, which means that board-level replacement may be needed
to change the algorithm. Cost and downtime are both factors in such
an upgrade.
In most cases, the cryptographic algorithm remains strong, but an
attack is found against the way that the strong algorithm is used in
a particular protocol. In these cases, a protocol change will
probably be needed. For example, the order of cryptographic
operations in the TLS protocol has evolved as various attacks have
been discovered. Originally, TLS performed encryption after
computation of the message authentication code (MAC). This order of
operations is called MAC-then-encrypt, which actually involves MAC
computation, padding, and then encryption. This is no longer
considered secure [BN] [K]. As a result, a mechanism was specified
to use encrypt-then-MAC instead [RFC7366]. Future versions of TLS
are expected to use exclusively authenticated encryption algorithms
[RFC5116], which should resolve the ordering discussion altogether.
After discovery of such attacks, updating the cryptographic
algorithms is not likely to be sufficient to thwart the new attack.
It may necessary to make significant changes to the protocol.
Some protocols are used to protect stored data. For example, S/MIME
[RFC5751] can protect a message kept in a mailbox. To recover the
protected stored data, protocol implementations need to support older
algorithms, even when they no longer use the older algorithms for the
protection of new stored data.
Support for too many algorithms can lead to implementation
vulnerabilities. When many algorithms are supported, some of them
will be rarely used. Any code that is rarely used can contain
undetected bugs, and algorithm implementations are no different.
Measurements SHOULD be used to determine whether implemented
algorithms are actually being used, and if they are not, future
releases should remove them. In addition, unused algorithms or
suites SHOULD be marked as deprecated in the IANA registry. In
short, eliminate the cruft.
Section 2.3 talks about algorithm transition without considering any
other aspects of the protocol design. In practice, there are
dependencies between the cryptographic algorithm and other aspects of
Housley Best Current Practice [Page 15]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
the protocol. For example, the BEAST attack [BEAST] against TLS
[RFC5246] caused many sites to turn off modern cryptographic
algorithms in favor of older and clearly weaker algorithms.
Mechanisms for timely update of devices are needed to deploy a
replacement algorithm or suite. It takes a long time to specify,
implement, and deploy a replacement; therefore, the transition
process needs to begin when practically exploitable flaws become
known. The update processes on some devices involve certification,
which further increases the time to deploy a replacement. For
example, devices that are part of health or safety systems often
require certification before deployment. Embedded systems and SCADA
(supervisory control and data acquisition) systems often have upgrade
cycles stretching over many years, leading to similar time-to-
deployment issues. Prompt action is needed if a replacement has any
hope of being deployed before exploitation techniques become widely
available.
5. IANA Considerations
This document does not establish any new IANA registries, nor does it
add any entries to existing registries.
This document does RECOMMEND a convention for new registries for
cryptographic algorithm or suite identifiers. Once an algorithm or
suite identifier is added to the registry, it SHOULD NOT be changed
or removed. However, it is desirable to include a means of marking a
registry entry as deprecated when implementation is no longer
advisable.
6. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC3766] Orman, H. and P. Hoffman, "Determining Strengths For Public
Keys Used For Exchanging Symmetric Keys", BCP 86, RFC 3766,
DOI 10.17487/RFC3766, April 2004,
<http://www.rfc-editor.org/info/rfc3766>.
7. Informative References
[BEAST] Wikipedia, "BEAST attack" under "Transport Layer Security",
November 2015, <https://en.wikipedia.org/w/index.php?title=
Transport_Layer_Security&oldid=689441642#BEAST_attack>.
Housley Best Current Practice [Page 16]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
[BN] Bellare, M. and C. Namprempre, "Authenticated Encryption:
Relations among notions and analysis of the generic
composition paradigm", Proceedings of AsiaCrypt '00,
Springer-Verlag LNCS No. 1976, p. 531,
DOI 10.1007/3-540-44448-3_41, December 2000.
[GCM] Dworkin, M, "Recommendation for Block Cipher Modes of
Operation: Galois/Counter Mode (GCM) and GMAC", NIST
Special Publication 800-30D, November 2007.
[K] Krawczyk, H., "The Order of Encryption and Authentication
for Protecting Communications (or: How Secure Is SSL?)",
Proceedings of Crypto '01, Springer-Verlag LNCS No. 2139,
p. 310, DOI 10.1007/3-540-44647-8_19, August 2001.
[RFC1984] IAB and IESG, "IAB and IESG Statement on Cryptographic
Technology and the Internet", BCP 200, RFC 1984,
DOI 10.17487/RFC1984, August 1996,
<http://www.rfc-editor.org/info/rfc1984>.
[RFC3365] Schiller, J., "Strong Security Requirements for Internet
Engineering Task Force Standard Protocols", BCP 61,
RFC 3365, DOI 10.17487/RFC3365, August 2002,
<http://www.rfc-editor.org/info/rfc3365>.
[RFC3610] Whiting, D., Housley, R., and N. Ferguson, "Counter with
CBC-MAC (CCM)", RFC 3610, DOI 10.17487/RFC3610, September
2003, <http://www.rfc-editor.org/info/rfc3610>.
[RFC3748] Aboba, B., Blunk, L., Vollbrecht, J., Carlson, J., and H.
Levkowetz, Ed., "Extensible Authentication Protocol (EAP)",
RFC 3748, DOI 10.17487/RFC3748, June 2004,
<http://www.rfc-editor.org/info/rfc3748>.
[RFC4302] Kent, S., "IP Authentication Header", RFC 4302,
DOI 10.17487/RFC4302, December 2005,
<http://www.rfc-editor.org/info/rfc4302>.
[RFC4303] Kent, S., "IP Encapsulating Security Payload (ESP)",
RFC 4303, DOI 10.17487/RFC4303, December 2005,
<http://www.rfc-editor.org/info/rfc4303>.
[RFC4307] Schiller, J., "Cryptographic Algorithms for Use in the
Internet Key Exchange Version 2 (IKEv2)", RFC 4307,
DOI 10.17487/RFC4307, December 2005,
<http://www.rfc-editor.org/info/rfc4307>.
Housley Best Current Practice [Page 17]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
[RFC4422] Melnikov, A., Ed., and K. Zeilenga, Ed., "Simple
Authentication and Security Layer (SASL)", RFC 4422,
DOI 10.17487/RFC4422, June 2006,
<http://www.rfc-editor.org/info/rfc4422>.
[RFC5116] McGrew, D., "An Interface and Algorithms for Authenticated
Encryption", RFC 5116, DOI 10.17487/RFC5116, January 2008,
<http://www.rfc-editor.org/info/rfc5116>.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246,
DOI 10.17487/RFC5246, August 2008,
<http://www.rfc-editor.org/info/rfc5246>.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
<http://www.rfc-editor.org/info/rfc5280>.
[RFC5652] Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
RFC 5652, DOI 10.17487/RFC5652, September 2009,
<http://www.rfc-editor.org/info/rfc5652>.
[RFC5751] Ramsdell, B. and S. Turner, "Secure/Multipurpose Internet
Mail Extensions (S/MIME) Version 3.2 Message
Specification", RFC 5751, DOI 10.17487/RFC5751, January
2010, <http://www.rfc-editor.org/info/rfc5751>.
[RFC6347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
Security Version 1.2", RFC 6347, DOI 10.17487/RFC6347,
January 2012, <http://www.rfc-editor.org/info/rfc6347>.
[RFC6916] Gagliano, R., Kent, S., and S. Turner, "Algorithm Agility
Procedure for the Resource Public Key Infrastructure
(RPKI)", BCP 182, RFC 6916, DOI 10.17487/RFC6916, April
2013, <http://www.rfc-editor.org/info/rfc6916>.
[RFC6975] Crocker, S. and S. Rose, "Signaling Cryptographic Algorithm
Understanding in DNS Security Extensions (DNSSEC)",
RFC 6975, DOI 10.17487/RFC6975, July 2013,
<http://www.rfc-editor.org/info/rfc6975>.
[RFC7296] Kaufman, C., Hoffman, P., Nir, Y., Eronen, P., and T.
Kivinen, "Internet Key Exchange Protocol Version 2
(IKEv2)", STD 79, RFC 7296, DOI 10.17487/RFC7296, October
2014, <http://www.rfc-editor.org/info/rfc7296>.
Housley Best Current Practice [Page 18]
RFC 7696 Guidelines for Cryptographic Alg Agility November 2015
[RFC7366] Gutmann, P., "Encrypt-then-MAC for Transport Layer Security
(TLS) and Datagram Transport Layer Security (DTLS)",
RFC 7366, DOI 10.17487/RFC7366, September 2014,
<http://www.rfc-editor.org/info/rfc7366>.
[RFC7435] Dukhovni, V., "Opportunistic Security: Some Protection Most
of the Time", RFC 7435, DOI 10.17487/RFC7435, December
2014, <http://www.rfc-editor.org/info/rfc7435>.
[RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre, "Recommendations
for Secure Use of Transport Layer Security (TLS) and
Datagram Transport Layer Security (DTLS)", BCP 195,
RFC 7525, DOI 10.17487/RFC7525, May 2015,
<http://www.rfc-editor.org/info/rfc7525>.
[WEP] Wikipedia, "Wired Equivalent Privacy", November 2015,
<https://en.wikipedia.org/w/index.php?
title=Wired_Equivalent_Privacy&oldid=688848497>.
[WiFi] IEEE, "Wireless LAN Medium Access Control (MAC) And
Physical Layer (PHY) Specifications", IEEE Std 802.11-1997,
1997.
Acknowledgements
Thanks to Bernard Aboba, Derek Atkins, David Black, Randy Bush, Jon
Callas, Andrew Chi, Steve Crocker, Viktor Dukhovni, Stephen Farrell,
Tony Finch, Ian Grigg, Peter Gutmann, Phillip Hallam-Baker, Wes
Hardaker, Joe Hildebrand, Paul Hoffman, Christian Huitema, Leif
Johansson, Suresh Krishnan, Watson Ladd, Paul Lambert, Ben Laurie,
Eliot Lear, Nikos Mavrogiannopoulos, Kathleen Moriarty, Yoav Nir,
Kenny Paterson, Rich Salz, Wendy Seltzer, Joel Sing, Rene Struik,
Kristof Teichel, Martin Thompson, Jeffrey Walton, Nico Williams, and
Peter Yee for their review and insightful comments. While some of
these people do not agree with some aspects of this document, the
discussion that resulted for their comments has certainly resulted in
a better document.
Author's Address
Russ Housley
Vigil Security, LLC
918 Spring Knoll Drive
Herndon, VA 20170
United States
Email: housley@vigilsec.com
Housley Best Current Practice [Page 19]