Internet Engineering Task Force (IETF) W. Mills
Request for Comments: 7293 Yahoo! Inc.
Category: Standards Track M. Kucherawy
ISSN: 2070-1721 Facebook, Inc.
July 2014
The Require-Recipient-Valid-Since Header Field
and SMTP Service Extension
Abstract
This document defines an extension for the Simple Mail Transfer
Protocol (SMTP) called "RRVS" to provide a method for senders to
indicate to receivers a point in time when the ownership of the
target mailbox was known to the sender. This can be used to detect
changes of mailbox ownership and thus prevent mail from being
delivered to the wrong party. This document also defines a header
field called "Require-Recipient-Valid-Since" that can be used to
tunnel the request through servers that do not support the extension.
The intended use of these facilities is on automatically generated
messages, such as account statements or password change instructions,
that might contain sensitive information, though it may also be
useful in other applications.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc7293.
Mills & Kucherawy Standards Track [Page 1]
RFC 7293 Require-Recipient-Valid-Since July 2014
Copyright Notice
Copyright (c) 2014 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Description . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1. The "RRVS" SMTP Extension . . . . . . . . . . . . . . . . 5
3.2. The "Require-Recipient-Valid-Since" Header Field . . . . 5
3.3. Timestamps . . . . . . . . . . . . . . . . . . . . . . . 6
4. Use By Generators . . . . . . . . . . . . . . . . . . . . . . 6
5. Handling By Receivers . . . . . . . . . . . . . . . . . . . . 7
5.1. SMTP Extension Used . . . . . . . . . . . . . . . . . . . 7
5.1.1. Relays . . . . . . . . . . . . . . . . . . . . . . . 8
5.2. Header Field Used . . . . . . . . . . . . . . . . . . . . 9
5.2.1. Design Choices . . . . . . . . . . . . . . . . . . . 10
5.3. Clock Synchronization . . . . . . . . . . . . . . . . . . 11
6. Relaying without RRVS Support . . . . . . . . . . . . . . . . 11
6.1. Header Field Conversion . . . . . . . . . . . . . . . . . 11
7. Header Field with Multiple Recipients . . . . . . . . . . . . 12
8. Special Use Addresses . . . . . . . . . . . . . . . . . . . . 13
8.1. Mailing Lists . . . . . . . . . . . . . . . . . . . . . . 13
8.2. Single-Recipient Aliases . . . . . . . . . . . . . . . . 13
8.3. Multiple-Recipient Aliases . . . . . . . . . . . . . . . 14
8.4. Confidential Forwarding Addresses . . . . . . . . . . . . 14
8.5. Suggested Mailing List Enhancements . . . . . . . . . . . 14
9. Continuous Ownership . . . . . . . . . . . . . . . . . . . . 15
10. Digital Signatures . . . . . . . . . . . . . . . . . . . . . 15
11. Authentication-Results Definitions . . . . . . . . . . . . . 16
12. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 16
12.1. SMTP Extension Example . . . . . . . . . . . . . . . . . 17
12.2. Header Field Example . . . . . . . . . . . . . . . . . . 17
12.3. Authentication-Results Example . . . . . . . . . . . . . 17
Mills & Kucherawy Standards Track [Page 2]
RFC 7293 Require-Recipient-Valid-Since July 2014
13. Security Considerations . . . . . . . . . . . . . . . . . . . 18
13.1. Abuse Countermeasures . . . . . . . . . . . . . . . . . 18
13.2. Suggested Use Restrictions . . . . . . . . . . . . . . . 18
13.3. False Sense of Security . . . . . . . . . . . . . . . . 18
13.4. Reassignment of Mailboxes . . . . . . . . . . . . . . . 19
14. Privacy Considerations . . . . . . . . . . . . . . . . . . . 19
14.1. The Tradeoff . . . . . . . . . . . . . . . . . . . . . . 19
14.2. Probing Attacks . . . . . . . . . . . . . . . . . . . . 19
14.3. Envelope Recipients . . . . . . . . . . . . . . . . . . 20
14.4. Risks with Use . . . . . . . . . . . . . . . . . . . . . 20
15. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 20
15.1. SMTP Extension Registration . . . . . . . . . . . . . . 20
15.2. Header Field Registration . . . . . . . . . . . . . . . 20
15.3. Enhanced Status Code Registration . . . . . . . . . . . 21
15.4. Authentication Results Registration . . . . . . . . . . 22
16. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 22
17. References . . . . . . . . . . . . . . . . . . . . . . . . . 23
17.1. Normative References . . . . . . . . . . . . . . . . . . 23
17.2. Informative References . . . . . . . . . . . . . . . . . 23
1. Introduction
Email addresses sometimes get reassigned to a different person. For
example, employment changes at a company can cause an address used
for an ex-employee to be assigned to a new employee, or a mail
service provider (MSP) might expire an account and then let someone
else register for the local-part that was previously used. Those who
sent mail to the previous owner of an address might not know that it
has been reassigned. This can lead to the sending of email to the
correct address but the wrong recipient. This situation is of
particular concern with transactional mail related to purchases,
online accounts, and the like.
What is needed is a way to indicate an attribute of the recipient
that will distinguish between the previous owner of an address and
its current owner, if they are different. Further, this needs to be
done in a way that respects privacy.
The mechanisms specified here allow the sender of the mail to
indicate how "old" the address assignment is expected to be. In
effect, the sender is saying, "I know that the intended recipient was
using this address at this point in time. I don't want this message
delivered to anyone else". A receiving system can then compare this
information against the point in time at which the address was
assigned to its current user. If the assignment was made later than
the point in time indicated in the message, there is a good chance
Mills & Kucherawy Standards Track [Page 3]
RFC 7293 Require-Recipient-Valid-Since July 2014
the current user of the address is not the correct recipient. The
receiving system can then prevent delivery and, preferably, notify
the original sender of the problem.
The primary application is transactional mail (such as account
information, password change requests, and other automatically
generated messages) rather than user-authored content. However, it
may be useful in other contexts; for example, a personal address book
could record the time an email address was added to it, and thus use
that time with this extension.
Because the use cases for this extension are strongly tied to privacy
issues, attention to the Security Considerations (Section 13) and the
Privacy Considerations (Section 14) is particularly important. Note,
especially, the limitation described in Section 13.3.
2. Definitions
For a description of the email architecture, consult [EMAIL-ARCH].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [KEYWORDS].
3. Description
To address the problem described in Section 1, a mail-sending client
(usually an automated agent) needs to indicate to the server to which
it is connecting that it expects the destination address of the
message to have been under continuous ownership (see Section 9) since
a specified point time. That specified time would be the time when
the intended recipient gave the address to the message author, or
perhaps a more recent time when the intended recipient reconfirmed
ownership of the address with the sender.
Two mechanisms are defined here: an extension to the Simple Mail
Transfer Protocol [SMTP] and a new message header field. The SMTP
extension permits strong assurance of enforcement by confirming
support at each handling step for a message and the option to demand
support at all nodes in the handling path of the message (and
returning of the message to the originator otherwise). The header
field can be used when the Message Delivery Agent (MDA) supports this
function, but an intermediary system between the sending system and
the MDA does not. However, the header field does not provide the
same strong assurance described above and is more prone to exposure
of private information (see Section 14.1).
Mills & Kucherawy Standards Track [Page 4]
RFC 7293 Require-Recipient-Valid-Since July 2014
The SMTP extension is called "RRVS" and adds a parameter to the SMTP
"RCPT" command that indicates the most recent point in time when the
message author believed the destination mailbox to be under the
continuous ownership of a specific party. Similarly, the "Require-
Recipient-Valid-Since" header field includes an intended recipient
coupled with a timestamp indicating the same thing.
3.1. The "RRVS" SMTP Extension
Extensions to SMTP are described in Section 2.2 of [SMTP].
The name of the extension is "RRVS", an abbreviation of "Require
Recipient Valid Since". Servers implementing the SMTP extension
advertise an additional EHLO keyword of "RRVS", which has no
associated parameters, introduces no new SMTP commands, and does not
alter the MAIL command.
A Message Transfer Agent (MTA) implementing RRVS can transmit or
accept one new parameter to the RCPT command. An MDA can also accept
this new parameter. The parameter is "RRVS", and the value is a
timestamp expressed as "date-time" as defined in [DATETIME], with the
added restriction that a "time-secfrac" MUST NOT be used. The
timestamp MAY optionally be followed by a semicolon character and a
letter (known as the "no-support action"), indicating the action to
be taken when a downstream MTA is discovered that does not support
the extension. Valid actions are "R" (reject; the default) and "C"
(continue).
Formally, the new parameter and its value are defined as follows:
rrvs-param = "RRVS=" date-time [ ";" ( "C" / "R" ) ]
Accordingly, this extension increases the maximum command length for
the RCPT command by 33 characters.
The meaning of this extension, when used, is described in
Section 5.1.
3.2. The "Require-Recipient-Valid-Since" Header Field
The general constraints on syntax and placement of header fields in a
message are defined in "Internet Message Format" [MAIL].
Using Augmented Backus-Naur Form [ABNF], the syntax for the field is:
rrvs = "Require-Recipient-Valid-Since:" addr-spec ";" date-time
CRLF
Mills & Kucherawy Standards Track [Page 5]
RFC 7293 Require-Recipient-Valid-Since July 2014
"date-time" is defined in Section 3.3, and "addr-spec" is defined in
Section 3.4.1 of [MAIL].
3.3. Timestamps
The header field version of this protocol has a different format for
the date and time expression than the SMTP extension does. This is
because message header fields use a format to express date and time
that is specific to message header fields, and this is consistent
with that usage.
Use of both date and time is done to be consistent with how current
implementations typically store the timestamp and to make it easy to
include the time zone. In practice, granularity beyond the date may
or may not be useful.
4. Use By Generators
When a message is generated whose content is sufficiently sensitive
that an author or author's ADministrative Management Domain (ADMD),
see [EMAIL-ARCH], wishes to protect against misdelivery using this
protocol, it determines for each recipient mailbox on the message a
timestamp at which it last confirmed ownership of that mailbox. It
then applies the SMTP extension when sending the message to its
destination.
In cases where the outgoing MTA does not support the extension, the
header field defined above can be used to pass the request through
that system. However, use of the header field is only a "best-
effort" approach to solving the stated goals, and it has some
shortcomings:
1. The positive confirmation of support at each handling node, with
the option to return the message to the originator when
end-to-end support cannot be confirmed, will be unavailable;
2. The protocol is focused on affecting delivery (that is, the
transaction) rather than content, and therefore use of a header
field in the content is generally inappropriate;
3. The mechanism cannot be used with multiple recipients without
unintentionally exposing information about one recipient to the
others (see Section 7); and
4. There is a risk of the timestamp parameter being inadvertently
forwarded, automatically or intentionally by the user (since user
agents might not reveal the presence of the header field), and
therefore exposed to unintended recipients. (See Section 14.4.)
Mills & Kucherawy Standards Track [Page 6]
RFC 7293 Require-Recipient-Valid-Since July 2014
Thus, the header field format MUST NOT be used unless the originator
or relay has specific knowledge that the receiving MDA or an
intermediary MTA will apply it properly. In any case, it SHOULD NOT
be used for the multi-recipient case.
Use of the header field mechanism is further restricted by the
practices described in Section 7.2 of [SMTP], Section 3.6.3 of
[MAIL], and Section 7 of this document.
5. Handling By Receivers
If a receiver implements this specification, then there are two
possible evaluation paths:
1. The sending client uses the extension, and so there is an RRVS
parameter on a RCPT TO command in the SMTP session, and the
parameters of interest are taken only from there (and the header
field, if present, is disregarded); or
2. The sending client does not use the extension, so the RRVS
parameter is not present on the RCPT TO commands in the SMTP
session, but the corresponding header field might be present in
the message.
When the continuous ownership test fails for transient reasons (such
as an unavailable database or other condition that is likely
temporary), normal transient failure handling for the message is
applied.
If the continuous ownership test cannot be completed because the
necessary datum (the mailbox creation or reassignment date and time)
was not recorded, the MDA doing the evaluation selects a date and
time to use that is the latest possible point in time at which the
mailbox could have been created or reassigned. For example, this
might be the earliest of all recorded mailbox creation/reassignment
timestamps, or the time when the host was first installed. If no
reasonable substitute for the timestamp can be selected, the MDA
rejects the message using an SMTP reply code, preferably with an
enhanced mail system status code (see Section 15.3), that indicates
the test cannot be completed. A message originator can then decide
whether to reissue the message without RRVS protection or find
another way to reach the mailbox owner.
5.1. SMTP Extension Used
For an MTA supporting the SMTP extension, the requirement is to
continue enforcement of RRVS during the relaying process to the next
MTA or the MDA.
Mills & Kucherawy Standards Track [Page 7]
RFC 7293 Require-Recipient-Valid-Since July 2014
A receiving MTA or MDA that implements the SMTP extension declared
above and observes an RRVS parameter on a RCPT TO command checks
whether the current owner of the destination mailbox has held it
continuously, far enough back to include the given point in time, and
delivers it unless that check returns in the negative. Specifically,
an MDA will do the following before continuing with delivery:
1. Ignore the parameter if the named mailbox is known to be a role
account as listed in "Mailbox Names for Common Services, Roles
and Functions" [ROLES].
2. If the address is not known to be a role account, and if that
address has not been under continuous ownership since the
timestamp specified in the extension, return a 550 error to the
RCPT command. (See also Section 15.3.)
5.1.1. Relays
An MTA that does not make mailbox ownership checks, such as an MTA
positioned to do SMTP ingress at an organizational boundary, SHOULD
relay the RRVS extension parameter to the next MTA or MDA so that it
can be processed there.
For the SMTP extension, the optional RRVS parameter defined in
Section 5.1 indicates the action to be taken when relaying a message
to another MTA that does not advertise support for this extension.
When this is the case and the no-support action was not specified or
is "R" (reject), the MTA handling the message MUST reject the message
by:
1. returning a 550 error to the DATA command, if synchronous service
is being provided to the SMTP client that introduced the message,
or
2. generating a Delivery Status Notification [DSN] to indicate to
the originator of the message that the non-delivery occurred and
terminating further relay attempts.
An enhanced mail system status code is defined for such rejections in
Section 15.3.
See Section 8.2 for additional discussion.
When relaying, an MTA MUST preserve the no-support action if it was
used by the SMTP client.
Mills & Kucherawy Standards Track [Page 8]
RFC 7293 Require-Recipient-Valid-Since July 2014
5.2. Header Field Used
A receiving system that implements this specification, upon receiving
a message bearing a "Require-Recipient-Valid-Since" header field when
no corresponding RRVS SMTP extension was used, checks whether the
destination mailbox owner has held it continuously, far enough back
to include the given date-time, and delivers it unless that check
returns in the negative. Expressed as a sequence of steps:
1. Extract those Require-Recipient-Valid-Since fields from the
message that contain a recipient for which no corresponding RRVS
SMTP extension was used.
2. Discard any such fields that match any of these criteria:
* are syntactically invalid;
* name a role account as listed in [ROLES];
* the "addr-spec" portion does not match a current recipient, as
listed in the RCPT TO commands in the SMTP session; or
* the "addr-spec" portion does not refer to a mailbox handled
for local delivery by this ADMD.
3. For each field remaining, determine if the named address has been
under continuous ownership since the corresponding timestamp. If
it has not, reject the message.
4. RECOMMENDED: If local delivery is being performed, remove all
instances of this field prior to delivery to a mailbox; if the
message is being forwarded, remove those instances of this header
field that were not discarded by step 2 above.
Handling proceeds normally upon completion of the above steps if
rejection has not been performed.
The final step is not mandatory as not all mail handling agents are
capable of stripping away header fields, and there are sometimes
reasons to keep the field intact such as debugging or presence of
digital signatures that might be invalidated by such a change. See
Section 10 for additional discussion.
If a message is to be rejected within the SMTP protocol itself
(versus generating a rejection message separately), servers
implementing this protocol SHOULD also implement the SMTP extension
described in "Enhanced Mail System Status Codes" [ESC] and use the
enhanced status codes described in Section 15.3 as appropriate.
Mills & Kucherawy Standards Track [Page 9]
RFC 7293 Require-Recipient-Valid-Since July 2014
Implementation by this method is expected to be transparent to non-
participants, since they would typically ignore this header field.
This header field is not normally added to a message that is
addressed to multiple recipients. The intended use of this field
involves an author seeking to protect transactional or otherwise
sensitive data intended for a single recipient, and thus generating
independent messages for each individual recipient is normal
practice. See Section 7 for further discussion and restrictions.
5.2.1. Design Choices
The presence of the address in the field content supports the case
where a message bearing this header field is forwarded. The specific
use case is as follows:
1. A user subscribes to a service "S" at date-time "D" and confirms
an email address at the user's current location, "A";
2. At some later date, the user intends to leave the current
location and thus creates a new mailbox elsewhere, at "B";
3. The user configures address "A" to forward to "B";
4. "S" constructs a message to "A" claiming that the address was
valid at date-time "D" and sends it to "A";
5. The receiving MTA for "A" determines that the forwarding in
effect was created by the same party that owned the mailbox there
and thus concludes that the continuous ownership test has been
satisfied;
6. If possible, the MTA for "A" removes this header field from the
message, and in either case, forwards it to "B"; and
7. On receipt at "B", either the header field has been removed or
the header field does not refer to a current envelope recipient,
and in either case the MTA delivers the message.
Section 8 discusses some interesting use cases, such as the case
where "B" above results in further forwarding of the message.
SMTP has never required any correspondence between addresses in the
RFC5321.MailFrom and RFC5321.RcptTo parameters and header fields of a
message, which is why the header field defined here contains the
recipient address to which the timestamp applies.
Mills & Kucherawy Standards Track [Page 10]
RFC 7293 Require-Recipient-Valid-Since July 2014
5.3. Clock Synchronization
The timestamp portion of this specification supports a precision at
the seconds level. Although uncommon, it is not impossible for a
clock at either a generator or a receiver to be incorrect, leading to
an incorrect result in the RRVS evaluation.
To minimize the risk of such incorrect results, both generators and
receivers implementing this specification MUST use a standard clock
synchronization protocol such as [NTP] to synchronize to a common
clock.
6. Relaying without RRVS Support
When a message is received using the SMTP extension defined here but
will not be delivered locally (that is, it needs to be relayed
further), the MTA to which the relay will take place might not be
compliant with this specification. Where the MTA in possession of
the message observes it is going to relay the message to an MTA that
does not advertise this extension, it needs to choose one of the
following actions:
1. Decline to relay the message further, preferably generating a
Delivery Status Notification [DSN] to indicate failure
(RECOMMENDED);
2. Downgrade the data thus provided in the SMTP extension to a
header field, as described in Section 6.1 below (SHOULD NOT
unless the conditions in that section are satisfied, and only
when the previous option is not available); or
3. Silently continue with delivery, dropping the protection offered
by this protocol.
Using options other than the first option needs to be avoided unless
there is specific knowledge that further relaying with the degraded
protections thus provided does not introduce undue risk.
6.1. Header Field Conversion
If an SMTP server ("B") receives a message bearing one or more
"Require-Recipient-Valid-Since" header fields from a client ("A"),
presumably because "A" does not support the SMTP extension, and needs
to relay the corresponding message on to another server ("C")
(thereby becoming a client), and "C" advertises support for the SMTP
extension, "B" SHOULD delete the header field(s) and instead relay
this information by making use of the SMTP extension. Note that such
modification of the header might affect later validation of the
Mills & Kucherawy Standards Track [Page 11]
RFC 7293 Require-Recipient-Valid-Since July 2014
header upon delivery; for example, a hash of the modified header
would produce a different result. This might be a valid cause for
some operators to skip this delete operation.
Conversely, if "B" has received a mailbox timestamp from "A" using
the SMTP extension for which it must now relay the message on to "C",
but "C" does not advertise the SMTP extension, and "B" does not
reject the message because rejection was specifically declined by the
client (see Section 5.1.1), "B" SHOULD add a Require-Recipient-Valid-
Since header field matching the mailbox to which relaying is being
done, and the corresponding valid-since timestamp for it, if it has
prior information that the eventual MDA or another intermediate MTA
supports this mechanism and will be able to process the header field
as described in this specification.
The admonitions about very cautious use of the header field described
in Section 4 apply to this relaying mechanism as well. If multiple
mailbox timestamps are received from "A", the admonitions in
Section 7 also apply.
7. Header Field with Multiple Recipients
Numerous issues arise when using the header field form of this
extension, particularly when multiple recipients are specified for a
single message resulting in multiple fields each with a distinct
address and timestamp.
Because of the nature of SMTP, a message bearing a multiplicity of
Require-Recipient-Valid-Since header fields could result in a single
delivery attempt for multiple recipients (in particular, if two of
the recipients are handled by the same server), and if any one of
them fails the test, the delivery fails to all of them; it then
becomes necessary to do one of the following:
o reject the message on completion of the DATA phase of the SMTP
session, which is a rejection of delivery to all recipients, or
o accept the message on completion of DATA, and then generate a
Delivery Status Notification [DSN] message for each of the failed
recipients.
Additional complexity arises when a message is sent to two
recipients, "A" and "B", presumably with different timestamps, both
of which are then redirected to a common address "C". The author is
not necessarily aware of the current or past ownership of mailbox
"C", or indeed that "A" and/or "B" have been redirected. This might
Mills & Kucherawy Standards Track [Page 12]
RFC 7293 Require-Recipient-Valid-Since July 2014
result in either or both of the two deliveries failing at "C", which
is likely to confuse the message author, who (as far as the author is
aware) never sent a message to "C" in the first place.
Finally, there is an obvious concern with the fan-out of a message
bearing the timestamps of multiple users; tight control over the
handling of the timestamp information is very difficult to assure as
the number of handling agents increases.
8. Special Use Addresses
In [DSN-SMTP], an SMTP extension was defined to allow SMTP clients to
request generation of DSNs and related information to allow such
reports to be maximally useful. Section 5.2.7 of that document
explored the issue of the use of that extension where the recipient
is a mailing list. This extension has similar concerns, which are
covered here following that document as a model.
For all cases described below, a receiving MTA SHOULD NOT introduce
RRVS in either form (SMTP extension or header field) if the message
did not arrive with RRVS in use. This would amount to second
guessing the message originator's intention and might lead to an
undesirable outcome.
8.1. Mailing Lists
Delivery to a mailing list service is considered a final delivery.
Where this protocol is in use, it is evaluated as per any normal
delivery: if the same mailing list has been operating in place of the
specified recipient mailbox since at least the timestamp given as the
RRVS parameter, the message is delivered to the list service
normally, and is otherwise not delivered.
It is important, however, that the participating MDA passing the
message to the list service needs to omit the RRVS parameter in
either form (SMTP extension or header field) when doing so. The
emission of a message from the list service to its subscribers
constitutes a new message not covered by the previous transaction.
8.2. Single-Recipient Aliases
Upon delivery of an RRVS-protected message to an alias (acting in
place of a mailbox) that results in relaying of the message to a
single other destination, the usual RRVS check is performed. The
continuous ownership test here might succeed if, for example, a
conventional user inbox was replaced with an alias on behalf of that
same user, and the time when this was done is recorded in a way that
can be queried by the relaying MTA.
Mills & Kucherawy Standards Track [Page 13]
RFC 7293 Require-Recipient-Valid-Since July 2014
If the relaying system also performs some kind of step where
ownership of the new destination address is confirmed, it SHOULD
apply RRVS using the later of that timestamp and the one that was
used inbound. This also allows for changes to the alias without
disrupting the protection offered by RRVS.
If the relaying system has no such time records related to the new
destination address, the RRVS SMTP extension is not used on the
relaying SMTP session, and the header field relative to the local
alias is removed, in accordance with Section 5.
8.3. Multiple-Recipient Aliases
Upon delivery of an RRVS-protected message to an alias (acting in
place of a mailbox) that results in relaying of the message to
multiple other destinations, the usual RRVS check is performed as in
Section 8.2. The MTA expanding such an alias then decides which of
the options enumerated in that section is to be applied for each new
recipient.
8.4. Confidential Forwarding Addresses
In the above cases, the original author could receive message
rejections, such as DSNs, from the ultimate destination, where the
RRVS check (or indeed, any other) fails and rejection is warranted.
This can reveal the existence of a forwarding relationship between
the original intended recipient and the actual final recipient.
Where this is a concern, the initial delivery attempt is to be
treated like a mailing list delivery, with RRVS evaluation done and
then all RRVS information removed from the message prior to relaying
it to its true destination.
8.5. Suggested Mailing List Enhancements
Mailing list services could store the timestamp at which a subscriber
was added to a mailing list. This specification could then be used
in conjunction with that information in order to restrict list
traffic to the original subscriber, rather than a different person
now in possession of an address under which the original subscriber
was added to the list. Upon receiving a rejection caused by this
specification, the list service can remove that address from further
distribution.
A mailing list service that receives a message containing the header
field defined here needs to remove it from the message prior to
redistributing it, limiting exposure of information regarding the
relationship between the message's author and the mailing list.
Mills & Kucherawy Standards Track [Page 14]
RFC 7293 Require-Recipient-Valid-Since July 2014
9. Continuous Ownership
For the purposes of this specification, an address is defined as
having been under continuous ownership since a given date-time if a
message sent to the address at any point since the given date-time
would not go to anyone except the owner at that given date-time.
That is, while an address may have been suspended or otherwise
disabled for some period, any mail actually delivered would have been
delivered exclusively to the same owner. It is presumed that some
sort of relationship exists between the message sender and the
intended recipient. Presumably, there has been some confirmation
process applied to establish this ownership of the receiver's
mailbox; however, the method of making such determinations is a local
matter and outside the scope of this document.
Evaluating the notion of continuous ownership is accomplished by
doing any query that establishes whether the above condition holds
for a given mailbox.
Determining continuous ownership of a mailbox is a local matter at
the receiving site. The only possible answers to the continuous-
ownership-since question are "yes", "no", and "unknown"; the action
to be taken in the "unknown" case is a matter of local policy.
For example, when control of a domain name is transferred, the new
domain owner might be unable to determine whether the owner of the
subject address has been under continuous ownership since the stated
date-time if the mailbox history is not also transferred (or was not
previously maintained). It will also be "unknown" if whatever
database contains mailbox ownership data is temporarily unavailable
at the time a message arrives for delivery. In this latter case,
typical SMTP temporary failure handling is appropriate.
To avoid exposing account details unnecessarily, if the address
specified has had one continuous owner since it was created, any
confirmation date-time SHOULD be considered to pass the test, even if
that date-time is earlier than the account creation date and time.
This is further discussed in Section 13.
10. Digital Signatures
This protocol mandates removal of the header field (when used) upon
delivery in all but exceptional circumstances. If a message with the
header field were digitally signed in a way that included the header
field, altering a message in this way would invalidate the signature.
However, the header field is strictly for tunneling purposes and
should be regarded by the rest of the transport system as purely
trace information.
Mills & Kucherawy Standards Track [Page 15]
RFC 7293 Require-Recipient-Valid-Since July 2014
Accordingly, the header field MUST NOT be included in the content
covered by digital signatures.
11. Authentication-Results Definitions
[AUTHRES] defines a mechanism for indicating, via a header field, the
results of message authentication checks. Section 15 registers RRVS
as a new method that can be reported in this way, as well as
corresponding result names. The possible result names and their
meanings are as follows:
none: The message had no recipient mailbox timestamp associated with
it, either via the SMTP extension or header field method; this
protocol was not in use.
unknown: At least one form of this protocol was in use, but
continuous ownership of the recipient mailbox could not be
determined.
temperror: At least one form of this protocol was in use, but some
kind of error occurred during evaluation that was transient in
nature; a later retry will likely produce a final result.
permerror: At least one form of this protocol was in use, but some
kind of error occurred during evaluation that was not recoverable;
a later retry will not likely produce a final result.
pass: At least one form of this protocol was in use, and the
destination mailbox was confirmed to have been under continuous
ownership since the timestamp thus provided.
fail: At least one form of this protocol was in use, and the
destination mailbox was confirmed not to have been under
continuous ownership since the timestamp thus provided.
Where multiple recipients are present on a message, multiple results
can be reported using the mechanism described in [AUTHRES].
12. Examples
In the following examples, "C:" indicates data sent by an SMTP
client, and "S:" indicates responses by the SMTP server. Message
content is CRLF terminated, though these are omitted here for ease of
reading.
Mills & Kucherawy Standards Track [Page 16]
RFC 7293 Require-Recipient-Valid-Since July 2014
12.1. SMTP Extension Example
C: [connection established]
S: 220 server.example.com ESMTP ready
C: EHLO client.example.net
S: 250-server.example.com
S: 250 RRVS
C: MAIL FROM:<sender@example.net>
S: 250 OK
C: RCPT TO:<receiver@example.com> RRVS=2014-04-03T23:01:00Z
S: 550 5.7.17 receiver@example.com is no longer valid
C: QUIT
S: 221 So long!
12.2. Header Field Example
C: [connection established]
S: 220 server.example.com ESMTP ready
C: HELO client.example.net
S: 250 server.example.com
C: MAIL FROM:<sender@example.net>
S: 250 OK
C: RCPT TO:<receiver@example.com>
S: 250 OK
C: DATA
S: 354 Ready for message content
C: From: Mister Sender <sender@example.net>
To: Miss Receiver <receiver@example.com>
Subject: Are you still there?
Date: Fri, 28 Jun 2013 18:01:01 +0200
Require-Recipient-Valid-Since: receiver@example.com;
Sat, 1 Jun 2013 09:23:01 -0700
Are you still there?
.
S: 550 5.7.17 receiver@example.com is no longer valid
C: QUIT
S: 221 So long!
12.3. Authentication-Results Example
Here is an example use of the Authentication-Results header field
used to yield the results of an RRVS evaluation:
Authentication-Results: mx.example.com; rrvs=pass
smtp.rcptto=user@example.com
Mills & Kucherawy Standards Track [Page 17]
RFC 7293 Require-Recipient-Valid-Since July 2014
This indicates that the message arrived addressed to the mailbox
user@example.com, the continuous ownership test was applied with the
provided timestamp, and the check revealed that the test was
satisfied. The timestamp is not revealed.
13. Security Considerations
13.1. Abuse Countermeasures
The response of a server implementing this protocol can disclose
information about the age of an existing email mailbox.
Implementation of countermeasures against probing attacks is
RECOMMENDED. For example, an operator could track appearance of this
field with respect to a particular mailbox and observe the timestamps
being submitted for testing; if it appears that a variety of
timestamps are being tried against a single mailbox in short order,
the field could be ignored and the message silently discarded. This
concern is discussed further in Section 14.
13.2. Suggested Use Restrictions
If the mailbox named in the field is known to have had only a single
continuous owner since creation, or not to have existed at all (under
any owner) prior to the date-time specified in the field, then the
field SHOULD be silently ignored and normal message handling applied
so that this information is not disclosed. Such fields are likely
the product of either gross error or an attack.
A message author using this specification might restrict inclusion of
the header field such that it is only done for recipients known also
to implement this specification, in order to reduce the possibility
of revealing information about the relationship between the author
and the mailbox.
If ownership of an entire domain is transferred, the new owner may
not know what addresses were assigned in the past by the prior owner.
Hence, no address can be known not to have had a single owner, or to
have existed (or not) at all. In this case, the "unknown" result is
likely appropriate.
13.3. False Sense of Security
Senders implementing this protocol likely believe their content is
being protected by doing so. It has to be considered, however, that
receiving systems might not implement this protocol correctly, or at
all. Furthermore, use of RRVS by a sending system constitutes
nothing more than a request to the receiving system; that system
could choose not to prevent delivery for some local policy, for legal
Mills & Kucherawy Standards Track [Page 18]
RFC 7293 Require-Recipient-Valid-Since July 2014
or operational reasons, which compromises the security the sending
system believed was a benefit to using RRVS. This could mean the
timestamp information involved in the protocol becomes inadvertently
revealed.
This concern lends further support to the notion that senders would
do well to avoid using this protocol other than when sending to
known, trusted receivers.
13.4. Reassignment of Mailboxes
This specification is a direct response to the risks involved with
reassignment or recycling of email addresses, an inherently dangerous
practice. It is typically expected that email addresses will not
have a high rate of turnover or ownership change.
It is RECOMMENDED to have a substantial period of time between
mailbox owners during which the mailbox accepts no mail, giving
message generators an opportunity to detect that the previous owner
is no longer at that address.
14. Privacy Considerations
14.1. The Tradeoff
That some MSPs allow for expiration of account names when they have
been unused for a protracted period forces a choice between two
potential types of privacy vulnerabilities, one of which presents
significantly greater threats to users than the other. Automatically
generated mail is often used to convey authentication credentials
that can potentially provide access to extremely sensitive
information. Supplying such credentials to the wrong party after a
mailbox ownership change could allow the previous owner's data to be
exposed without his or her authorization or knowledge. In contrast,
the information that may be exposed to a third party via the proposal
in this document is limited to information about the mailbox history.
Given that MSPs have chosen to allow transfers of mailbox ownership
without the prior owner's involvement, the information leakage from
the extensions specified here creates far lower overall risk than the
potential for delivering mail to the wrong party.
14.2. Probing Attacks
As described above, use of this extension or header field in probing
attacks can disclose information about the history of the mailbox.
The harm that can be done by leaking any kind of private information
is difficult to predict, so it is prudent to be sensitive to this
sort of disclosure, either inadvertently or in response to probing by
Mills & Kucherawy Standards Track [Page 19]
RFC 7293 Require-Recipient-Valid-Since July 2014
an attacker. It bears restating, then, that implementing
countermeasures against abuse of this capability needs strong
consideration.
14.3. Envelope Recipients
The email To and Cc header fields are not required to be populated
with addresses that match the envelope recipient set, and Cc may even
be absent. However, the algorithm in Section 3 requires that this
header field contain a match for an envelope recipient in order to be
actionable. As such, use of this specification can reveal some or
all of the original intended recipient set to any party that can see
the message in transit or upon delivery.
For a message destined to a single recipient, this is unlikely to be
a concern, which is one of the reasons use of this specification on
multi-recipient messages is discouraged.
14.4. Risks with Use
MDAs might not implement the recommendation to remove the header
field defined here when messages are delivered, either out of
ignorance or due to error. Since user agents often do not render all
of the header fields present, the message could be forwarded to
another party that would then inadvertently have the content of this
header field.
A bad actor may detect use of either form of the RRVS protocol and
interpret it as an indication of high-value content.
15. IANA Considerations
15.1. SMTP Extension Registration
Section 2.2.2 of [SMTP] sets out the procedure for registering a new
SMTP extension. IANA has registered the SMTP extension using the
details provided in Section 3.1 of this document.
15.2. Header Field Registration
IANA has added the following entry to the "Permanent Message Header
Field Names" registry, as per the procedure found in [IANA-HEADERS]:
Header field name: Require-Recipient-Valid-Since
Applicable protocol: mail ([MAIL])
Status: standard
Author/Change controller: IETF
Specification document(s): RFC 7293
Mills & Kucherawy Standards Track [Page 20]
RFC 7293 Require-Recipient-Valid-Since July 2014
Related information:
Requesting review of any proposed changes and additions to
this field is recommended.
15.3. Enhanced Status Code Registration
IANA has registered the following in the Enumerated Status Codes
table of the "Simple Mail Transfer Protocol (SMTP) Enhanced Status
Codes Registry":
Code: X.7.17
Sample Text: Mailbox owner has changed
Associated basic status code: 5XX
Description: This status code is returned when a message is
received with a Require-Recipient-Valid-Since
field or RRVS extension and the receiving
system is able to determine that the intended
recipient mailbox has not been under continuous
ownership since the specified date-time.
Reference: RFC 7293
Submitter: M. Kucherawy
Change controller: IESG
Code: X.7.18
Sample Text: Domain owner has changed
Associated basic status code: 5XX
Description: This status code is returned when a message is
received with a Require-Recipient-Valid-Since
field or RRVS extension and the receiving
system wishes to disclose that the owner of
the domain name of the recipient has changed
since the specified date-time.
Reference: RFC 7293
Submitter: M. Kucherawy
Change controller: IESG
Code: X.7.19
Sample Text: RRVS test cannot be completed
Associated basic status code: 5XX
Description: This status code is returned when a message is
received with a Require-Recipient-Valid-Since
field or RRVS extension and the receiving
system cannot complete the requested
evaluation because the required timestamp was
not recorded. The message originator needs to
decide whether to reissue the message without
RRVS protection.
Reference: RFC 7293
Mills & Kucherawy Standards Track [Page 21]
RFC 7293 Require-Recipient-Valid-Since July 2014
Submitter: M. Kucherawy
Change controller: IESG
15.4. Authentication Results Registration
IANA has registered the following in the "Email Authentication
Methods" registry:
Method: rrvs
Specifying Document: RFC 7293
ptype: smtp
Property: rcptto
Value: envelope recipient
Status: active
Version: 1
IANA has also registered the following in the "Email Authentication
Result Names" registry:
Codes: none, unknown, temperror, permerror, pass, fail
Defined: RFC 7293
Auth Method(s): rrvs
Meaning: Section 11 of RFC 7293
Status: active
16. Acknowledgments
Erling Ellingsen proposed the idea.
Reviews and comments were provided by Michael Adkins, Kurt Andersen,
Eric Burger, Alissa Cooper, Dave Cridland, Dave Crocker, Ned Freed,
John Levine, Alexey Melnikov, Jay Nancarrow, Hector Santos, Gregg
Stefancik, and Ed Zayas.
Mills & Kucherawy Standards Track [Page 22]
RFC 7293 Require-Recipient-Valid-Since July 2014
17. References
17.1. Normative References
[ABNF] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234, January 2008.
[DATETIME] Klyne, G., Ed. and C. Newman, "Date and Time on the
Internet: Timestamps", RFC 3339, July 2002.
[IANA-HEADERS]
Klyne, G., Nottingham, M., and J. Mogul, "Registration
Procedures for Message Header Fields", BCP 90, RFC 3864,
September 2004.
[KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[MAIL] Resnick, P., Ed., "Internet Message Format", RFC 5322,
October 2008.
[NTP] Mills, D., Martin, J., Burbank, J., and W. Kasch, "Network
Time Protocol Version 4: Protocol and Algorithms
Specification", RFC 5905, June 2010.
[ROLES] Crocker, D., "Mailbox Names for Common Services, Roles and
Functions", RFC 2142, May 1997.
[SMTP] Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
October 2008.
17.2. Informative References
[AUTHRES] Kucherawy, M., "Message Header Field for Indicating
Message Authentication Status", RFC 7001, September 2013.
[DSN] Moore, K. and G. Vaudreuil, "An Extensible Message Format
for Delivery Status Notifications", RFC 3464, January
2003.
[DSN-SMTP] Moore, K., "Simple Mail Transfer Protocol (SMTP) Service
Extension for Delivery Status Notifications (DSNs)", RFC
3461, January 2003.
[EMAIL-ARCH]
Crocker, D., "Internet Mail Architecture", RFC 5598, July
2009.
Mills & Kucherawy Standards Track [Page 23]
RFC 7293 Require-Recipient-Valid-Since July 2014
[ESC] Vaudreuil, G., "Enhanced Mail System Status Codes", RFC
3463, January 2003.
Authors' Addresses
William J. Mills
Yahoo! Inc.
EMail: wmills_92105@yahoo.com
Murray S. Kucherawy
Facebook, Inc.
1 Hacker Way
Menlo Park, CA 94025
USA
EMail: msk@fb.com
Mills & Kucherawy Standards Track [Page 24]