PEP: 669
Title: Low Impact Monitoring for CPython
Author: Mark Shannon <mark@hotpy.org>
Status: Draft
Type: Standards Track
Content-Type: text/x-rst
Created: 18-Aug-2021
Post-History: 07-Dec-2021
Abstract
========
Using a profiler or debugger in CPython can have a severe impact on
performance. Slowdowns by an order of magnitude are common.
This PEP proposes an API for monitoring Python programs running
on CPython that will enable monitoring at low cost.
Although this PEP does not specify an implementation, it is expected that
it will be implemented using the quickening step of
:pep:`659`.
A ``sys.monitoring`` namespace will be added, which will contain
the relevant functions and enum.
Motivation
==========
Developers should not have to pay an unreasonable cost to use debuggers,
profilers and other similar tools.
C++ and Java developers expect to be able to run a program at full speed
(or very close to it) under a debugger.
Python developers should expect that too.
Rationale
=========
The quickening mechanism provided by :pep:`659` provides a way to dynamically
modify executing Python bytecode. These modifications have little cost beyond
the parts of the code that are modified and a relatively low cost to those
parts that are modified. We can leverage this to provide an efficient
mechanism for monitoring that was not possible in 3.10 or earlier.
By using quickening, we expect that code run under a debugger on 3.12
should outperform code run without a debugger on 3.11.
Profiling will still slow down execution, but by much less than in 3.11.
Specification
=============
Monitoring of Python programs is done by registering callback functions
for events and by activating a set of events.
Activating events and registering callback functions are independent of each other.
Both registering callbacks and activating events are done on a per-tool basis.
It is possible to have multiple tools that respond to different sets of events.
Events
------
As a code object executes various events occur that might be of interest
to tools. By activating events and by registering callback functions
tools can respond to these events in any way that suits them.
Events can be set globally, or for individual code objects.
For 3.12, CPython will support the following events:
* PY_START: Start of a Python function (occurs immediately after the call, the callee's frame will be on the stack)
* PY_RESUME: Resumption of a Python function (for generator and coroutine functions), except for throw() calls.
* PY_THROW: A Python function is resumed by a throw() call.
* PY_RETURN: Return from a Python function (occurs immediately before the return, the callee's frame will be on the stack).
* PY_YIELD: Yield from a Python function (occurs immediately before the yield, the callee's frame will be on the stack).
* PY_UNWIND: Exit from a Python function during exception unwinding.
* C_CALL: Call to any callable, except Python functions (before the call in this case).
* C_RETURN: Return from any callable, except Python functions (after the return in this case).
* RAISE: An exception is raised.
* EXCEPTION_HANDLED: An exception is handled.
* LINE: An instruction is about to be executed that has a different line number from the preceding instruction.
* INSTRUCTION -- A VM instruction is about to be executed.
* JUMP -- An unconditional jump in the control flow graph is reached.
* BRANCH -- A conditional branch is about to be taken (or not).
* MARKER -- A marker is hit
More events may be added in the future.
All events will be attributes of the ``Event`` enum in ``sys.monitoring``::
class Event(enum.IntFlag):
PY_CALL = ...
Note that ``Event`` is an ``IntFlag`` which means that the events can be or-ed
together to form a set of events.
Tool identifiers
----------------
The VM can support up to 6 tools at once.
Before registering or activating events, a tool should choose an identifier.
Identifiers are integers in the range 0 to 5.
::
sys.monitoring.use_tool_id(id)->None
sys.monitoring.free_tool_id(id)->None
``sys.monitoring.use_tool_id`` raises a ``ValueError`` if ``id`` is in use.
All IDs are treated the same by the VM with regard to events, but the following
IDs are pre-defined to make co-operation of tools easier::
sys.monitoring.DEBUGGER_ID = 0
sys.monitoring.COVERAGE_ID = 1
sys.monitoring.PROFILER_ID = 2
sys.monitoring.OPTIMIZER_ID = 3
There is no obligation to set an ID, nor is there anything preventing a tool from
using an ID even it is already in use.
However, tool are encouraged to use a unique ID and respect other tools.
For example, if a debugger were attached and ``DEBUGGER_ID`` were in use, it should
report an error, rather than carrying on regardless.
The ``OPTIMIZER_ID`` is provided for tools like Cinder or PyTorch
that want to optimize Python code, but need to decide what to
optimize in a way that depends on some wider context.
Setting events globally
-----------------------
Events can be controlled globally by modifying the set of events being monitored:
* ``sys.monitoring.get_events(tool_id:int)->Event``
Returns the ``Event`` set for all the active events.
* ``sys.monitoring.set_events(tool_id:int, event_set: Event)``
Activates all events which are set in ``event_set``.
No events are active by default.
Per code object events
----------------------
Events can also be controlled on a per code object basis:
* ``sys.monitoring.get_local_events(tool_id:int, code: CodeType)->Event``
Returns the ``Event`` set for all the local events for ``code``
* ``sys.monitoring.set_local_events(tool_id:int, code: CodeType, event_set: Event)``
Activates all the local events for ``code`` which are set in ``event_set``.
Local events add to global events, but do not mask them.
In other words, all global events will trigger for a code object, regardless of the local events.
Register callback functions
---------------------------
To register a callable for events call::
sys.monitoring.register_callback(tool_id:int, event: Event, func: Callable | None)
``register_callback`` returns the previously registered callback, or ``None``.
Functions can be unregistered by calling
``sys.monitoring.register_callback(tool_id, event, None)``.
Callback functions can be registered and unregistered at any time.
Registering a callback function will generate a ``sys.audit`` event.
Callback function arguments
'''''''''''''''''''''''''''
When an active event occurs, the registered callback function is called.
Different events will provide the callback function with different arguments, as follows:
* All events starting with ``PY_``:
``func(code: CodeType, instruction_offset: int) -> DISABLE | Any``
* ``C_CALL`` and ``C_RETURN``:
``func(code: CodeType, instruction_offset: int, callable: object) -> DISABLE | Any``
* ``RAISE`` and ``EXCEPTION_HANDLED``:
``func(code: CodeType, instruction_offset: int, exception: BaseException) -> DISABLE | Any``
* ``LINE``:
``func(code: CodeType, line_number: int) -> DISABLE | Any``
* ``BRANCH``:
``func(code: CodeType, instruction_offset: int, destination_offset: int) -> DISABLE | Any``
Note that the ``destination_offset`` is where the code will next execute.
For an untaken branch this will be the offset of the instruction following
the branch.
* ``INSTRUCTION``:
``func(code: CodeType, instruction_offset: int) -> DISABLE | Any``
* ``MARKER``:
``func(code: CodeType, instruction_offset: int) -> DISABLE | Any``
If a callback returns ``sys.monitoring.DISABLE`` then that tool will not
recieve any more events for that ``(code, instruction_offset)``.
This feature is provided for coverage and other tools that are only interested
seeing an event once.
Tools may see events after returning ``DISABLE``, in which case, they will not see
those events until ``sys.monitoring.restart_events()`` is called.
Note that ``sys.monitoring.restart_events()`` is not specific to one tool,
so tools must be prepared to recieve events that they have chosen to DISABLE.
Events in callback functions
----------------------------
Events are suspended in callback functions and their callees for the tool
that registered that callback.
That means that other tools will see events in the callback functions for other
tools. This could be useful for debugging a profiling tool, but would produce
misleading profiles, as the debugger tool would show up in the profile.
Inserting and removing markers
------------------------------
Two new functions are added to the ``sys`` module to support markers.
* ``sys.monitoring.insert_marker(tool_id: int, code: CodeType, offset: int)``
* ``sys.monitoring.remove_marker(tool_id: int, code: CodeType, offset: int)``
A single code object may not have more than 255 markers at once.
``sys.monitoring.insert_marker`` raises a ``ValueError`` if this limit
is exceeded.
Order of events
---------------
If an instructions triggers several events the occur in the following order:
* MARKER
* INSTRUCTION
* LINE
* All other events (only one of these event can occur per instruction)
Each event is delivered to tools in ascending order of ID.
Attributes of the ``sys.monitoring`` namespace
----------------------------------------------
* ``class Event(enum.IntFlag)``
* ``def use_tool_id(id)->None``
* ``def free_tool_id(id)->None``
* ``def get_events(tool_id: int)->Event``
* ``def set_events(tool_id: int, event_set: Event)->None``
* ``def get_local_events(tool_id: int, code: CodeType)->Event``
* ``def set_local_events(tool_id: int, code: CodeType, event_set: Event)->None``
* ``def register_callback(tool_id: int, event: Event, func: Callable)->Optional[Callable]``
* ``def insert_marker(tool_id: int, code: CodeType, offset: Event)->None``
* ``def remove_marker(tool_id: int, code: CodeType, offset: Event)->None``
* ``def restart_events()->None``
* ``DISABLE: object``
Backwards Compatibility
=======================
This PEP is mostly backwards compatible.
This PEP is incompatible with :pep:`523` as the behavior would be undefined,
as we have no control over the behavior of :pep:`523` plugins.
Thus, if :pep:`523` is in use, then calling ``sys.monitoring.set_events()`` or
``sys.monitoring.set_local_events()`` will raise an exception.
Likewise, if ``sys.monitoring.set_events()`` or
``sys.monitoring.set_local_events()`` has been called, then using :pep:`523`
will raise an exception.
``sys.settrace`` and ``sys.setprofile`` will act as if they were tools 6 and 7
respectively, so can be used along side this PEP.
This makes ``sys.settrace`` and ``sys.setprofile`` incompatible with :pep:`523`.
Arguably, they already were as the author know of any PEP 523 plugin that support
``sys.settrace`` or ``sys.setprofile`` correctly. This PEP merely formalizes that.
Performance
-----------
If no events are active, this PEP should have a small positive impact on
performance. Experiments show between 1 and 2% speedup from not supporting
``sys.settrace()`` directly.
The performance of ``sys.settrace()`` will be worse.
The performance of ``sys.setprofile()`` should be better.
However, by the tools relying on ``sys.settrace()`` and ``sys.setprofile()``
can be made a lot faster by using the API provided by this PEP.
If a small set of events are active, e.g. for a debugger, then the overhead
of callbacks will be orders of magnitudes less than for ``sys.settrace`` and
much cheaper than using :pep:`523`.
Coverage tools can be implemented at very low cost,
by returning ``DISABLE`` in all callbacks.
For heavily instrumented code, e.g. using ``LINE``, performance should be
better than ``sys.settrace``, but not by that much as performance will be
dominated by the time spent in callbacks.
For optimizing virtual machines, such as future versions of CPython
(and ``PyPy`` should they choose to support this API), changes to the set
active events in the midst of a long running program could be quite
expensive, possibly taking hundreds of milliseconds as it triggers
de-optimizations. Once such de-optimization has occurred, performance should
recover as the VM can re-optimize the instrumented code.
In general these operations can be considered to be fast:
* ``def get_events(tool_id: int)->Event``
* ``def get_local_events(tool_id: int, code: CodeType)->Event``
* ``def register_callback(tool_id: int, event: Event, func: Callable)->Optional[Callable]``
These operations are slower, but not especially so:
* ``def set_local_events(tool_id: int, code: CodeType, event_set: Event)->None``
* ``def insert_marker(tool_id: int, code: CodeType, offset: Event)->None``
* ``def remove_marker(tool_id: int, code: CodeType, offset: Event)->None``
And these operations should be regarded as slow:
* ``def use_tool_id(id)->None``
* ``def free_tool_id(id)->None``
* ``def set_events(tool_id: int, event_set: Event)->None``
* ``def restart_events()->None``
How slow, the slow operation the operations are, depends on when then happen.
If done early in the program, before modules are loaded,
they should be fairly inexpensive.
Memory Consumption
''''''''''''''''''
When not in use, this PEP will have a neglible change on memory consumption.
How memory is used is very much an implementation detail.
However, we expect that for 3.12 the additional memory consumption per
code object will be **roughly** as follows:
+-------------+--------+--------+-------------+
| | Events |
+-------------+--------+--------+-------------+
| Tools | Others | LINE | INSTRUCTION |
+=============+========+========+=============+
| One | None | ≈40% | ≈80% |
+-------------+--------+--------+-------------+
+ Two or more | ≈40% | ≈120% | ≈200% |
+-------------+--------+--------+-------------+
Security Implications
=====================
Allowing modification of running code has some security implications,
but no more than the ability to generate and call new code.
All the new functions listed above will trigger audit hooks.
Implementation
==============
This outlines the proposed implementation for CPython 3.12. The actual
implementation for later versions of CPython and other Python implementations
may differ considerably.
The proposed implementation of this PEP will be built on top of the quickening
step of :pep:`PEP 659 <659#quickening>`.
Activating some events will cause all code objects to
be quickened before they are executed.
For example, if the ``C_CALL`` event is turned on,
then all call instructions will be
replaced with a ``INSTRUMENTED_CALL`` instruction.
Note that this will interfere with specialization, which will result in some
performance degradation in addition to the overhead of calling the
registered callable.
When the set of active events changes, the VM will immediately update
all code objects present on the call stack of any thread. It will also set in
place traps to ensure that all code objects are correctly instrumented when
called. Consequently changing the set of active events should be done as
infrequently as possible, as it could be quite an expensive operation.
Other events, such as ``RAISE`` can be turned on or off cheaply,
as they do not rely on code instrumentation, but runtime checks when the
underlying event occurs.
The exact set of events that require instrumentation is an implementation detail,
but for the current design, the following events will require instrumentation:
* PY_START
* PY_RESUME
* PY_RETURN
* PY_YIELD
* C_CALL
* C_RETURN
* LINE
* INSTRUCTION
* JUMP
* BRANCH
Each instrumented bytecode will require an additional 8 bits of information to
note which tool the instrumentation applies to.
``LINE`` and ``INSTRUCTION`` events require additional information, as they
need to store the original instruction, or even the instrumented instruction
if they overlap other instrumentation.
Implementing tools
==================
It is the philosophy of this PEP that it should be possible for third-party monitoring
tools to achieve high-performance, not that it should be easy for them to do so.
Converting events into data that is meaningful to the users is
the responsibility of the tool.
All events have a cost, and tools should attempt to the use set of events
that trigger the least often and still provide the necessary information.
Debuggers
---------
Inserting breakpoints
'''''''''''''''''''''
Breakpoints can be inserted by using markers. For example::
sys.insert_marker(code, offset)
Which will insert a marker at ``offset`` in ``code``,
which can be used as a breakpoint.
To insert a breakpoint at a given line, the matching instruction offsets
should be found from ``code.co_lines()``.
Breakpoints can be removed by removing the marker::
sys.remove_marker(code, offset)
Stepping
''''''''
Debuggers usually offer the ability to step execution by a
single instruction or line.
This can be implemented by inserting a new marker at the required
offset(s) of the code to be stepped to,
and by removing the current marker.
It is the job of the debugger to compute the relevant offset(s).
Attaching
'''''''''
Debuggers can use the ``PY_CALL``, etc. events to be informed when
a code object is first encountered, so that any necessary breakpoints
can be inserted.
Coverage Tools
--------------
Coverage tools need to track which parts of the control graph have been
executed. To do this, they need to register for the ``PY_`` events,
plus ``JUMP`` and ``BRANCH``.
This information can be then be converted back into a line based report
after execution has completed.
Profilers
---------
Simple profilers need to gather information about calls.
To do this profilers should register for the following events:
* PY_CALL
* PY_RESUME
* PY_THROW
* PY_RETURN
* PY_YIELD
* PY_UNWIND
* C_CALL
* C_RETURN
Line based profilers
''''''''''''''''''''
Line based profilers can use the ``LINE`` and ``JUMP`` events.
Implementers of profilers should be aware that instrumenting ``LINE``
events will have a large impact on performance.
.. note::
Instrumenting profilers have significant overhead and will distort
the results of profiling. Unless you need exact call counts,
consider using a statistical profiler.
Rejected ideas
==============
A draft version of this PEP proposed making the user responsible
for inserting the monitoring instructions, rather than have VM do it.
However, that puts too much of a burden on the tools, and would make
attaching a debugger nearly impossible.
Copyright
=========
This document is placed in the public domain or under the
CC0-1.0-Universal license, whichever is more permissive.
..
Local Variables:
mode: indented-text
indent-tabs-mode: nil
sentence-end-double-space: t
fill-column: 70
coding: utf-8
End: