Path: news1.ucsd.edu!ihnp4.ucsd.edu!dog.ee.lbl.gov!overload.lbl.gov!lll-winken.llnl.gov!hookup!torn!news.bc.net!rover.ucs.ualberta.ca!alberta!art
From: art@cs.ualberta.ca (Art Mulder)
Newsgroups: comp.windows.x,news.answers,comp.answers
Subject: comp.windows.x: Getting more performance out of X. FAQ
Followup-To: poster
Date: 28 Nov 1995 17:58:16 GMT
Organization: Computing Science, U of Alberta, Edmonton, Canada
Lines: 810
Approved: news-answers-request@MIT.Edu
Expires: 20 Dec 95 23:00:00 GMT
Message-ID: <49fijo$ko8@scapa.cs.ualberta.ca>
Reply-To: art@cs.ualberta.ca (Art Mulder)
NNTP-Posting-Host: sawnlk.cs.ualberta.ca
Summary: This posting contains a list of suggestions about what you can do to get the best performance out of X on your workstation -- without buying more hardware.
Keywords: FAQ speed X
Xref: news1.ucsd.edu comp.windows.x:52700 news.answers:50216 comp.answers:12937
Archive-name: x-faq/speedups
Last-modified: 1995/10/11
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HOW TO MAXIMIZE THE PERFORMANCE OF X -- monthly posting
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Compiled by Art Mulder (art@cs.ualberta.ca)
More RAM, Faster CPU's, More disk space, Faster Ethernet.... These
are the standard responses you hear when you ask how to improve the
performance of your workstation.
Well, more hardware isn't always an option, and I wonder if more
hardware is always even a necessity.
This "FAQ" list is a collection of suggestions and ideas from
different people on the net on how you can the best possible
performance from X Windows on your workstation, WITHOUT PURCHASING
MORE HARDWARE.
Performance is a highly subjective issue. The individual user must
balance `speed' versus `features' in order to come to a personal
decision. Therefore this document can be be expected to contain many
subjective opinions in and amongst the objective facts.
This document is specifically concerned with X. There are of course
many other factors that can affect the performance of a workstation.
However, they are outside the scope of this document.
[ People seriously interested in the whole area of system
performance, might want to look at the O'Reilly Nutshell Handbook
"System Performance Tuning" by Mike Loukides. IMHO, it contains a
well-written, comprehensive treatment of system performance. I
refer to it a lot. I'm unaware of any other similar books. --ed.]
-----------------
Table of Contents
-----------------
0. Introduction & Administrivia
1. Window Managers
2. The X Server
! Which Server?
Locking the Server into RAM?
Starting your Server
! Fonts
About the Resources File
Define Your Display Properly
3. Clients
A Better Clock for X
! A Better Terminal Emulator for X
Other Client Comments
Tuning your client
4. Miscellaneous Suggestions
Pretty Pictures
A Quicker Mouse
Programming Thoughts
Backing Store
Say What!?
5. Other Sources of Information
The "Other X FAQ"
! Books & etc.
6. Author & Notes
! = changed since last issue.
* = new since last issue.
-----------------------------
Introduction & Administrivia
-----------------------------
This document is posted each month, on or around the 15th, to the
Usenet news groups comp.windows.x, news.answers, and comp.answers.
If you are reading a copy of this FAQ which is more than a few
months old (see the "Last-modified" date above) you should probably
locate the latest edition, since the information may be outdated.
If you do not know how to get those newsgroups and/or your site does
not receive them and/or this article has already expired, you can
retrieve this FAQ from an archive site.
There exist several usenet FAQ archive sites. To find out more about
them and how to access them, please see the "Introduction to the
*.answers newsgroups" posting in news.answers.
The main FAQ archive is at rtfm.mit.edu. This document can be found
there in /pub/usenet/news.answers/x-faq/speedups. If you do not have
access to anonymous ftp, you can retrieve it by sending a mail
message to mail-server@rtfm.mit.edu with the command "send
usenet/news.answers/x-faq/speedups" in the message body.
In addition, this FAQ is available at ftp.x.org (and its mirror
sites) in /contrib/faqs/speedup-x-faq. Most X FAQs are there.
---------------
Window Managers
---------------
There are a lot of window managers out there, with lots of different
features and abilities. The choice of which to use is by necessity a
balancing act between performance and useful features. At this
point, most respondents have agreed upon "twm" as the best candidate
for a speedy window manager.
A couple of generic tricks you can try to soup up your window manger,
is turning off unnecessary things like "zooming" and "opaque move".
Also, if you lay out your windows in a tiled manner, you reduce the
amount of cpu power spent in raising and lowering overlapping
windows. Joe English (joe@trystero.art.com)
I've found that a good font for tiling is 7x13 (aka:
-misc-fixed-medium-r-normal--13-100-100-100-c-70-iso8859-1 ). It is
the biggest font I know of that I can use on my Sun (1152x900 screen)
and still get two 80 column terminal windows side-by-side on the
display with no overlap. Other font suggestions will be accepted.
Suggestions for your consideration:
Linux'ers and others might want a look at fvwm. A light-weight
virtual wm, targeted at ``machines with too little memory, at laptops
on which mouse usage may be awkward, and at users who prefer the
appearance of the Motif window manager to twm ... all wm functions
can be performed w/out a mouse'' [from the README].
Zack Evans (zevans@nyx.cs.du.edu)
While originally developed for Linux, fvwm will compile on a number
of different platforms. The fvwm docs claim a memory consumption of
about 1/3 to 2/3 that of twm.
------------
The X Server
------------
Which Server?
- - - - - - -
Make sure that your server is a proper match for your hardware.
If you have a monochrome monitor, use a monochrome X11 server.
On my Monochrome Sun, I haven't noticed much difference between
the Xsun (colour) server and XsunMono, however it was pointed out to
me that XsunMono is about 800k smaller and therefore should contribute
to less paging.
[ thanks to: Jonny Farringdon (j.farringdon@psychol.ucl.ac.uk),
Michael Salmon (Michael.Salmon@eos.ericsson.se) ]
How your server was compiled can also make a difference. Jeff Law
(law@schirf.cs.utah.edu) advises us that on a Sun system, X should be
compiled with gcc (version 2.*) or with the unbundled Sun compiler.
You can expect to get "*very* large speedups in the server" by not
using the bundled SunOS compiler. I assume that similar results
would occur if you used one of the other high-quality commercial
compilers on the market.
Ben Jackson (bjj@sequent.com):
The XFree86 XF86_SVGA server that comes with the binary
distributions has support for 17 different kinds of SVGA hardware.
On any single machine installation, support for all but one can be
removed, drastically reducing the size of the server binary. This
is accomplished by installing the LinkKit distribution (available
from ftp.xfree86.org, or the mirror site where you got the rest of
the tarballs) and editing the included `site.def' definition of
XF86SvgaDrivers. More details are included in the README (installs
as /usr/X11R6/lib/Server/README). On my FreeBSD 2.0.5 machine, the
stock XF86_SVGA is 2.7M. A cirrus-only version is 1.5M, and took
less than 5 minutes to build.
Locking the Server into RAM?
- - - - - - - - - - - - - - -
It was suggested that perhaps hacking the X server so that it would
stay locked in RAM (and therefore not get paged out) might help
performances. eg: via a call to plock().
[Eric C Claeys (ecc@eperm.att.com), Danny Backx (db@sunbim.be),
Juan D. Martin (juando@cnm.us.es)]
Kenny Ranerup [kenny@axis.se] tried this a few years ago and
confirmed that it does work, and can give a noticeable speedup. But,
you must be careful that your server doesn't grow too large (ie,
close to the size of your RAM). He also makes the point that slow
interactive performace is in many cases due to client paging (paging
in libraries), and not server paging.
Starting your Server
- - - - - - - - - - -
Joe English (joe@trystero.art.com) :
If you start up a lot of clients in your .xsession or whatever, sleep
for a second or two after launching each one. After I changed my
.xclients script to do this, logging in actually took *less* time...
we have a heavily loaded system without much core, though.
This sounds crazy, but I have confirmed that it works!
Warner Losh (imp@boulder.openware.com) provided me with a good
explanation of why this works, which I have summarized here:
When you start up an X server it takes a huge amount of time to
start accepting connections. A lot of initialization is done by
the server when it starts. This process touches a large number of
pages. Any other process running at the same time would fight the
server for use of the CPU, and more importantly, memory. If you
put a sleep in there, you give the Server a chance to get itself
sorted out before the clients start up.
Similarly, there is also a lot of initialization whenever an X
client program starts: toolkits registering widgets, resources
being fetched, programs initializing state and "databases" and so
forth. All this activity is typically memory intensive. Once this
initialization is done ("The process has reached a steady state"),
the memory usage typically settles down to using only a few pages.
By using sleeps to stagger the launching of your clients in your
.Xinitrc , you avoid them fighting each other for your
workstation's limited resources
This is most definitely a "Your Mileage May Vary" situation, as there
are so many variables to be considered: available RAM, local swap
space, load average, number of users on your system, which clients
you are starting, etc.
Currently in my .xinitrc I have a situation like:
(sleep 1; exec xclock ) &
(sleep 1; exec xbiff ) &
(sleep 1; exec xterm ) &
(sleep 1; exec xterm ) &
I've experimented with:
(sleep 1; exec xclock ) &
(sleep 2; exec xbiff ) &
(sleep 3; exec xterm ) &
(sleep 4; exec xterm ) &
I've even tried:
(sleep 2; exec start_X_clients_script ) &
and then in start_X_clients_script I had:
(sleep 1; exec xclock ) &
(sleep 1; exec xbiff ) &
(sleep 1; exec xterm ) &
(sleep 1; exec xterm ) &
[ The idea with this last one was to make sure that xinit had
completely finished processing my .xinitrc, and had settled down
into a "steady state" before the sleep expired and all my clients
were launched. ]
All of these yielded fairly comparable results, and so I just stuck
with my current setup, for its simplicity. You will probably have to
experiment a bit to find a setup which suits you.
Fonts
- - -
Loading fonts takes time and RAM. If you minimize the number of fonts
your applications use, you'll get speed increases in load-up time.
One simple strategy is to choose a small number of fonts (one small,
one large, one roman, whatever suits you) and configure all your
clients -- or at least all your heavily used clients -- to use only
those few fonts. Client programs should start up quicker if their
font is already loaded into the server. This will also conserve
server resources, since fewer fonts will be loaded by the server.
[ Farrell McKay (fbm@ptcburp.ptcbu.oz.au),
Joe English (joe@trystero.art.com) ]
eg: My main xterm font is 7x13, so I also have twm set up to use 7x13
in all its menus and icons etc. Twm's default font is 8x13. Since
I don't normally use 8x13, I've eliminated one font from my server.
Oliver Jones (oj@roadrunner.pictel.com):
Keep fonts local to the workstation, rather than loading them over nfs.
If you will make extensive use of R5 scalable fonts, use a font server.
Anthony Stuckey (astuckey@predator.urbana.mcd.mot.com):
This is particularly good advice on Linux. Linux has a problem
with non-floating-point capable hardware (486SX's, etc) in that
they will freeze for up to a few minutes while the Scalable fonts
are created... The font server fixes this to a certain extent, as
does removing the scalable fonts from your font path. ... I believe
that a writeup of this problem is in the Linux Tips FAQ
[The main point here is that non-fpu machines, linux or otherwise,
should experience a benefit from running a font server.]
About the Resources File
- - - - - - - - - - - - -
Keep your .Xresources / .Xdefaults file small. Saves RAM and saves
on server startup time. Joe English (joe@trystero.art.com)
One suggestion:
In your .Xresources file, try putting only the minimum number of
resources that you want to have available to all of your
applications. For example: *reverseVideo: true
Then, separate your resources into individual client-specific
resource files. For example: $HOME/lib/app-defaults. In your
.login file set the environment variable XUSERFILESEARCHPATH:
setenv XUSERFILESEARCHPATH $HOME/lib/app-defaults/%N
(Note: It is easier and quicker for Xt to process
XUSERFILESEARCHPATH than XAPPLRESDIR.)
[ The "comp.windows.x Frequently Asked Questions" FAQ contains
an excellent explanation of how this and the other main X
environment variables work. --ed.]
So, when xterm launches, it loads (through Xt) its resources from
.../app-defaults/XTerm. Xdvi finds them in .../app-defaults/XDvi,
and so on and so forth. Note that not all clients follow the same
XXxxx resource-file naming pattern. You can check in your system
app-defaults directory (often: /usr/X11R5/lib/X11/app-defaults/) to
find the proper name, and then name your personal resource files
with the same name.
This is all documented in the Xt Specification (pg 125 & 666).
[Thanks to: Kevin Samborn (samborn@mtkgc.com),
Michael Urban (urban@cobra.jpl.nasa.gov),
Tom Bagli (tomb@gator.bocaraton.ibm.com),
and Mike Long (mikel@ee.cornell.edu).
Kevin is willing mail his setup files to inquirers.]
This method of organizing your personal resources has the following
benefits:
- Easier to maintain / more usable.
- Fewer resources are stored in the X server in the RESOURCE_MANAGER
property. As a side benefit your server may start fractionally
quicker, since it doesn`t have to load all your resources.
- Applications only process their own resources, never have to sort
through all of your resources to find the ones that affect them.
It also has drawbacks:
- the application that you are interested in has to load an
additional file every time it starts up. This doesn't seem to
make that much of a performance difference, and you might
consider this a huge boon to usability. If you are modifying an
application's resource database, you just need to re-run the
application without having to "xrdb" again.
- xrdb will by default run your .Xresources file through cpp. When
your resources are split out into multiple resource files and
then loaded by the individual client programs, they will not.
WATCH OUT FOR THIS!!
I had C style comments in my .Xresources file, which cpp stripped
out. When I switched to this method of distributed resource
files I spent several frustrating days trying to figure out why
my clients were not finding their resources. Xt did *NOT*
provide any error message when it encountered the C style
comments in the resource files, it simply, silently, aborted
processing the resource file.
The loss of preprocessing (which can be very handy, e.g. ``#ifdef
COLOR'' ...) is enough to cause some people to dismiss this
method of resource management.
- You may also run into some clients which "break the rules". For
example, neither Emacs (18.58.3) nor Xvt (1.0) will find their
resources if they are anywhere other than in .Xresources.
This is because emacs (and presumably, Xvt) are not Xt based
applications. They are coded to use Xlib directly.
XUSERFILESEARCHPATH and XAPPLRESDIR are Xt features.
Larry Williamson (larry@witch.mitra.com)
- when starting up a client on a machine that does not share files
with the machine where your resources are stored, your client
will not find its resources. Loading all your resources into the
server will guarantee that all of your clients will always find
their resources. Casey Leedom (casey@gauss.llnl.gov)
A possible compromise that I have tried, is to put resources for all
my heavily used clients (eg: xterm) into my .Xresources file, and to
use the "separate resources files" method for clients that I seldom
use.
Define Your Display Properly
- - - - - - - - - - - - - - -
Client programs are often executed on the same machine as the
server. In that situation, rather than setting your DISPLAY
environment variable to "<hostname>:0.0", where <hostname> is the
name of your workstation, you should set your DISPLAY variable to
"unix:0.0" or ":0.0". By doing this you access optimized routines
that know that the server is on the same machine and use a shared
memory method of transferring requests.
[thanks to Patrick J Horgan (pjh70@ras.amdahl.com)]
See the _DISPLAY NAMES_ section of the X(1) man page for further
explanation of how to properly set your display name.
"I don't think it's stock MIT, but (at least) Data General and HP
have libraries that are smart enough to use local communication even
when the DISPLAY isn't set specially."
Rob Sartin (88opensi!sartin@uunet.UU.NET)
[Jody Goldberg (jody@algorithmics.com) sent me an Xlib patch to
change stock R5 to use local communication even if DISPLAY is not
properly set. I don't want to get in the business of distributing or
trying to juggle non-MIT patches and so have elected not to include
it here. Hopefully MIT will apply this minor (~8 lines) patch
themselves. In the meantime, if you want to try it yourself, email
Jody. --ed.]
-------
Clients
-------
If you only have a few megabytes of Ram then you should think
carefully about the number of programs you are running. Think also
about the _kind_ of programs you are running. For example: Is there
a smaller clock program than xclock?
Unfortunately, I haven't really noticed that programs advertise how
large they are, so the onus is on us to do the research and spread
the word.
[ Suggestions on better alternatives to the some of the standard
clients (eg: Xclock, Xterm, Xbiff) are welcome. --ed.]
I've received some contradictory advice from people, on the subject
of X client programs. Some advocate the use of programs that are
strictly Xlib based, since Xt, Xaw and other toolkits are rather
large. Others warn us that other applications which you are using
may have already loaded up one or more of these shared libraries. In
this case, using a non-Xt (for example) client program may actually
_increase_ the amount of RAM consumed.
The upshot of all this seems to be: Don't mix toolkits. That is, try
and use just Athena clients, or just Xview clients (or just Motif
clients, etc). If you use more than one, then you're dragging in
more than one toolkit library.
Know your environment, and think carefully about which client
programs would work best together in that environment.
[Thanks to: Rob Sartin (88opensi!sartin@uunet.UU.NET),
Duncan Sinclair (sinclair@dcs.gla.ac.uk | sinclair@uk.ac.gla.dcs) ]
A Better Clock for X
- - - - - - - - - - -
1) xcuckoo
suggested by: Duncan Sinclair (sinclair@dcs.gla.ac.uk)
available: on export.lcs.mit.edu
Xcuckoo displays a clock in the title bar of *another* program.
Saves screen real estate.
2) mclock
suggested by: der Mouse (mouse@Lightning.McRCIM.McGill.EDU)
available: larry.mcrcim.mcgill.edu (132.206.1.1) in /X/mclock.shar
Non Xt-based. Extensively configurable. it can be made to look
very much like MIT oclock, or mostly like xclock purely by changing
resources.
Of course, the ultimate clock --- one that consumes no resources, and
takes up no screen real estate --- is the one that hangs on your wall.
:-)
A Better Terminal Emulator for X
- - - - - - - - - - - - - - - - -
From the README file distributed with xterm:
+-----
| Abandon All Hope, Ye Who Enter Here
|
| This is undoubtedly the most ugly program in the distribution.
| ...
+-----
Ugly maybe, but at my site it's still the most used. I suspect that
xterm is one of the most used clients at many, if not most sites.
Laziness? Isn't there a better terminal emulator available? See
below.
If you must use xterm, you can try reducing the number of saveLines
to reduce memory usage. [ Oliver Jones (oj@roadrunner.pictel.com),
Jonny Farringdon (j.farringdon@psychol.ucl.ac.uk) ]
1) Xvt
Suggested by: Richard Hesketh (rlh2@ukc.ac.uk)
Author: John D. Bovey (jdb@ukc.ac.uk)
Available: export.lcs.mit.edu in /contrib/xvt-1.0.tar.Z
[From the README file] "Xvt is an X terminal-emulator that is
designed to be more or less compatible with xterm while using much
less swap space. It is mainly intended for use at sites which use
large numbers of X terminals but may also be useful on single
workstations that are short of memory. On a [SunOS 4.1.* Sparc], an
initially invoked xvt uses about 1/3 megabyte of swap while xterm
uses about 1.3 megabytes (obtained by running pstat rather than ps
which seems to give unreliable size figures on SPARCs). The main
way that xvt achieves its small size is by avoiding the use of the X
toolkit."
Since it is a partial 'clone' of xterm, you don't have to rename
your resources, as xvt pretends to be "XTerm". In its current
version, you cannot bind keys as you can in xterm. I've heard that
there are versions of xvt with this feature, but I've not found any
yet.
UPDATE (Oct 1993): John Bovey tells me that a new version of xvt is
in the works that should have some of the most frequently missed
xterm features.
There have been some conflicting opinions aired over xvt vs. xterm.
Different sites with different needs will likely have to do
their own evaluation. Caveat Emptor, your mileage may vary.
I have seen hard data from J.Bovey showing how xvt does in fact
require less swap space than xterm. However, both of us would still
like to see any other benchmarks that people can provide comparing
the two. (eg: How much RAM each occupies, relative speed of each.)
2) rxvt
Suggested by: Zack Evans (zevans@nyx.cs.du.edu)
Author: Rob Nation (nation@rocket.sanders.lockheed.com)
Originally a stripped down Linux port of xvt, with some
minor modifications, I'm now told that this program has
been updated several times.
John Henders (jhenders@stdismas.wimsey.com):
Here's a comparison of memory usage between xterm and rxvt on
linux. As a bonux, rxvt scrolls text about 10X faster than an
xterm as well.
PID TTY MAJFLT MINFLT TRS DRS SIZE SWAP RSS SHRD LIB DT COMMAND
23658 p 1 23 195 44 168 772 0 772 548 560 56 rxvt
27411 pq3 110 247 84 140 1104 0 1104 800 880 76 xterm
[ed note: So, has 'rxvt' completely superseded 'xvt', or is 'xvt'
still in development? ]
3) mterm
Suggested by/Author: der Mouse (mouse@Lightning.McRCIM.McGill.EDU)
Available: larry.mcrcim.mcgill.edu (132.206.1.1) in
/X/mterm.src/mterm.ball-o-wax.
"I also have my own terminal emulator. Its major lack is
scrollback, but some people like it anyway."
Other Client Comments
- - - - - - - - - - -
When using the xlock screen locking client, the "qix" mode is
much more lightweight than the default mode.
[Q. Alex Zhao (azhao@cc.gatech.edu)]
I can confirm the previous report from personal experience here. In
a lab full of ~20 sun 3/80's all running the Xkernel software, the
subnet was getting regularly clobbered. This was tracked down to
students running xlock. Since these machines are all xterminals, the
actual xlock program runs remotely, and generates a scary amount of
network traffic to draw the default 'swarm' pictures on the screen.
We have removed this program and replaced it with a much simpler
screen locking program which simply blanks the screen. [ed.]
A suggestion: xtrlock, by Ian Jackson (ijackson@nyx.cs.du.edu)
It is very small (about 16k running), and doesn't produce any traffic
while locked. Drawback: It doesn't make your screen invisible.
[ Klamer Schutte (klamer@ph.tn.tudelft.nl) ]
An improved xbiff: Xbuffy. It can watch multiple mailboxes and can
do a pop up showing the From and Subject line of incoming mail.
Xbiff doesn't eat much memory and Xbuffy tends to be about the same
(on the RS/6000, xbuffy tends use just a little less memory). It is
in the contrib directory on ftp.x.org.
[ Bill Pemberton (wfp5p@virginia.edu) ]
Tuning your client
- - - - - - - - - -
Suggestions on how you can tune your client programs to work faster.
From Scott Barman (scott@asd.com) comes a suggestion regarding Motif
Text Field Widgets:
I noticed that during data entry into Motif text field widgets, I
was getting a slight lag in response to some keystrokes,
particularly the initial one in the field. Examining the what was
going on with xscope I found it. It seems that when the resource
XmNblinkRate is non-zero and the focus is on a text field widget
(or even just a text widget) the I-beam cursor will blink. Every
time the cursor appears or disappears in those widgets, the widget
code is making a request to the server (CopyArea). The user can
stop this by setting the resource XmNblinkRate to 0. It is not
noticeable on a 40MHz SPARC, but it does make a little difference
on a [slower system].
This specific suggestion can probably be applied in general to lots
of areas. Consider your heavily used clients, are there any minor
embellishments that can be turned off and thereby save on Server
requests?
-------------------------
Miscellaneous Suggestions
-------------------------
Pretty Pictures
- - - - - - - -
Don't use large bitmaps (GIF's, etc) as root window backgrounds.
- The more complicated your root window bitmap, the slower the server
is at redrawing your screen when you reposition windows (or redraw,
etc)
- These take up RAM, and CPU power. I work on a Sun SPARC and I'm
conscious of performance issues, I can't comprehend it when I see
people with a 4mb Sun 3/60 running xphoon as their root window.
I'll let someone else figure out how much RAM would be occupied by
having a full screen root image on a colour workstation.
- If you're anything like me, you need all the screen real estate
that you can get for clients, and so rarely see the root window
anyway.
[ Thanks to Qiang Alex Zhao (azhao@cs.arizona.edu)
for reminding me of this one. --ed.]
A Quicker Mouse
- - - - - - - -
Using xset, you can adjust how fast your pointer moves on the screen
when you move your mouse. I use "xset m 3 10" in my .xinitrc file,
which lets me send my pointer across the screen with just a flick of
the wrist. See the xset man page for further ideas and information.
Hint: sometimes you may want to *slow down* your mouse tracking for
fine work. To cover my options, I have placed a number of different
mouse setting commands into a menu in my window manager.
e.g. (for twm) :
menu "mouse settings" {
"Mouse Settings:" f.title
" Very Fast" ! "xset m 7 10 &"
" Normal (Fast)" ! "xset m 3 10 &"
" System Default (Un-Accelerated)" ! "xset m default &"
" Glacial" ! "xset m 0 10 &"
}
Programming Thoughts
- - - - - - - - - - -
Joe English (joe@trystero.art.com) :
To speed up applications that you're developing, there are tons of
things you can do. Some that stick out:
- For Motif programs, don't set XmFontList resources for individual
buttons, labels, lists, et. al.; use the defaultFontList or
labelFontList or whatever resource of the highest-level manager
widget. Again, stick to as few fonts as possible.
- Better yet, don't use Motif at all. It's an absolute pig.
- Don't create and destroy widgets on the fly. Try to reuse them.
(This will avoid many problems with buggy toolkits, too.)
- Use a line width of 0 in GCs. On some servers this makes a HUGE
difference.
- Compress and collapse multiple Expose events. This can make the
difference between a fast application and a completely unusable
one.
Francois Staes (frans@kiwi.uia.ac.be) :
Just a small remark: I once heard that using a better malloc
function would greatly increase performance of Xt based
applications since they use malloc heavily. They suggested trying
out the GNUY malloc, but I didn't find the time yet. I did some
tests on small programs just doing malloc and free, and the
differences were indeed very noticeable ( somewhat 5 times faster)
[ Any confirmation on this from anyone? --ed.]
Andre' Beck (Andre_Beck@IRS.Inf.TU-Dresden.de) :
- Unnecessary NoExpose Events.
Most people use XCopyArea/XCopyPlane as fastest blit routines, but
they forget to reset graphics_exposures in the GC used for the
blits. This will cause a NoExpose Event every blit, that, in most
cases, only puts load onto the connection and forces the client to
run through its event-loop again and again.
- Thousands of XChangeGC requests.
This "Gfx Context Switching" is also seen in most handcoded X-Apps,
where only one or few GCs are created and then heavily changed
again and again. Xt uses a definitely better mechanism, by caching
and sharing a lot of GCs with all needed parameters. This will
remove the load of subsequent XChangeGC requests from the
connection (by moving it toward the client startup phase).
Backing Store
- - - - - - -
Joe Nardelli (nardelli@mitre.org) :
I've found that using 'backing store' really speeds up redrawing of
complex windows. Ex: I have a window that stores an intricate 3-D
sceen, and redrawing it every time a window pops up in front is a
real waste of time. It is much quicker to set the 'backing store'
attribute to either 'Always' or 'WhenMapped'. ... Note that the
server keeps a copy of the window in memory, so very simple windows
may actually slow some systems done. Your mileage may vary.
Say What!?
- - - - - -
Some contributors proposed ideas that seem right off the wall at first:
David B. Lewis (by day: dbl@osf.org, by night: david%craft@uunet.uu.net) :
How about this: swap displays with someone else. Run all your
programs on the other machine and display locally; the other user
runs off your machine onto the other display. Goal: reduce context
switches in the same operation between client and server.
I'm not in a situation where I can easily try this, but I have
received the following confirmation...
Michael Salmon (Michael.Salmon@eos.ericsson.se):
I regularly run programs on other machines and I notice a big
difference. I try to run on a machine where I will reduce net usage
and usually with nice to reduce the impact of my intrusion. This
helps a lot on my poor little SS1+ with only 16 MB, it was
essential when I only had 8 MB.
Casey Leedom (casey@gauss.llnl.gov) :
[The X11 Server and the client are] competing for the same CPU as
your server when you run it on the same machine. Not really a
major problem, except that the X11 client and the server are in
absolute synchronicity and are context thrashing.
Timothy H Panton (thp@westhawk.uucp) :
Firstly it relies on the fact that most CPU's are mostly idle, X's
cpu usage is bursty. so the chances of you and your teammate
doing something cpu-intensive at the same time is small. If they
are not then you get twice the cpu+memory available for your
action.
The second factor is that context switches are expensive, using 2
cpu's halves them, you pay a price due to the overhead of going
over the network, but this is offset in most cases by the improved
buffering of a network (typically 20k vs 4k for a pipe), allowing
even fewer context switches.
----------------------------
Other Sources of Information
----------------------------
The "Other X FAQ"
- - - - - - - - -
David B. Lewis (faq%craft@uunet.uu.net) maintains the informative and
well written "comp.windows.x Frequently Asked Questions" document.
Its focus is on general X information, while this FAQ concentrates
on performance.
The comp.windows.x FAQ does address the issue of speed, but only with
regards to the X server. The gist of that topic seems to be:
"Use X11R5, it is faster than R4".
(Please see the X FAQ for complete details).
Books & etc.
- - - - - - -
Volume 8 in O'Reilly's X Window System Series; ``X Window System
Administrator's Guide'' is a book that all X administrator's should
read. (email your snailmail address to catalog@ora.com for a catalog)
Adrian Nye (adrian@ora.com):
A lot more tips on performance are in the paper "Improving X
Application Performance" by Chris D. Peterson and Sharon Chang, in
Issue 3 of The X Resource.
An earlier version of this paper appeared in the Xhibition 1992
conference proceedings.
This paper is absolutely essential reading for X programmers.
[For information on The X Resource, contact paula@ora.com --ed.]
Sajee Mathew (scm@cdssua.chesapeake.com)
"Motif Debugging and Performance Tuning" by Doug Young, Prentice
Hall, 1994. Good book. The section on performance tuning presents
some useful techniques for speeding up X programs from the X-lib
and toolkit levels.
--------------
Author & Notes
--------------
This list is currently maintained by Art Mulder (art@cs.ualberta.ca)
Suggestions, corrections, or submission for inclusion in this list
are gladly accepted. Layout suggestions and comments (spelling
mistak's too! :-) are also welcome.
Currently I have listed all contributors of the various comments and
suggestions. If you do not want to be credited, please tell me.
speedup-x-faq is copyright (c) 1993 by Arthur E. Mulder
You may copy this document in whole or in part as long as you don't
try to make money off it, or pretend that you wrote it.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
--
..art mulder ( art@cs.ualberta.ca ) ( http://web.cs.ualberta.ca/~art/ )
( Postmaster, News admin, Webmaster, Ftp admin, ... )
( Computer Operations, CS Dept, U of Alberta, Edmonton )