Path: news1.ucsd.edu!ihnp4.ucsd.edu!news.service.uci.edu!unogate!mvb.saic.com!news.mathworks.com!bloom-beacon.mit.edu!senator-bedfellow.mit.edu!faqserv
From: poynton@inforamp.net (Charles Poynton)
Newsgroups: comp.graphics,comp.graphics.algorithms,sci.engr.television.advanced,sci.engr.television.broadcast,sci.image.processing,comp.answers,sci.answers,news.answers
Subject: colorspace-faq -- FAQ about Colour and Gamma
Supersedes: <graphics/colorspace-faq_838734371@rtfm.mit.edu>
Followup-To: poster
Date: 29 Aug 1996 15:48:10 GMT
Organization: Poynton Vector, Toronto, ON Canada, +1 416 486 3271
Lines: 1991
Approved: news-answers-request@MIT.EDU
Expires: 12 Oct 1996 15:47:15 GMT
Message-ID: <graphics/colorspace-faq_841333635@rtfm.mit.edu>
Reply-To: Poynton@inforamp.net
NNTP-Posting-Host: bloom-picayune.mit.edu
Summary: This FAQ clarifies aspects of nonlinear image coding (gamma),
colour specification and image coding that are important to
computer graphics, image processing, video, and the transfer of
digital images to print.
X-Last-Updated: 1995/05/28
Originator: faqserv@bloom-picayune.MIT.EDU
Xref: news1.ucsd.edu comp.graphics.algorithms:28006 sci.engr.television.advanced:2623 sci.engr.television.broadcast:2114 sci.image.processing:19564 comp.answers:16089 sci.answers:3552 news.answers:64342
Archive-name: graphics/colorspace-faq
Version: 1995/05/28
X-Last-Updated: 1995/05/28
URL: <http://www.inforamp.net/~poynton/Poynton-colour.html>
Posting-Frequency: monthly
colorspace-faq -- FREQUENTLY ASKED QUESTIONS ABOUT GAMMA AND COLOUR
Copyright (c) 1995/05/28
Charles A. Poynton
poynton@inforamp.net
<http://www.inforamp.net/~poynton/>
This is the 1995/05/28 revision of "colorspace-faq".
In video, computer graphics and image processing the "gamma" symbol
represents a numerical parameter that describes the nonlinearity of
intensity reproduction. The Gamma FAQ section of this document
clarifies aspects of nonlinear image coding.
The Colour FAQ section of this document clarifies aspects of colour
specification and image coding that are important to computer graphics,
image processing, video, and the transfer of digital images to print.
Colorspace-faq was originated by David Bourgin
<dbourgin@turing.imag.fr>, who has ceded responsibility for maintenance
at RTFM and periodic posting. This version of colorspace-faq comprises
concatenated GammaFAQ and ColorFAQ documents which were previously
available -- and remain available -- by ftp; see G-0 below.
Adrian Ford and Alan Roberts have written a Colour Equations FAQ that
details transforms among colour spaces such as RGB, HSI, HSL, CMY and
video. Find it at <ftp://ftp.wmin.ac.uk/pub/itrg/coloureq.txt> (48 KB).
I retain copyright to this note. You have permission to use it, but you
may not publish it.
CONTENTS
G-0 Where do these documents live?
Frequently Asked Questions about Gamma
G-1 What is intensity?
G-2 What is luminance?
G-3 What is lightness?
G-4 What is gamma?
G-5 What is gamma correction?
G-6 Does NTSC use a gamma of 2.2?
G-7 Does PAL use a gamma of 2.8?
G-8 I pulled an image off the net and it looks murky.
G-9 I pulled an image off the net and it looks a little too contrasty.
G-10 What is luma?
G-11 What is contrast ratio?
G-12 How many bits do I need to smoothly shade from black to white?
G-13 How is gamma handled in video, computer graphics and desktop
computing?
G-14 What is the gamma of a Macintosh?
G-15 Does the gamma of CRTs vary wildly?
G-16 How should I adjust my monitor's brightness and contrast controls?
G-17 Should I do image processing operations on linear or nonlinear
image data?
G-18 What's the transfer function of offset printing?
G-19 References
Frequently Asked Questions about Color
C-1 What is colour?
C-2 What is intensity?
C-3 What is luminance?
C-4 What is lightness?
C-5 What is hue?
C-6 What is saturation?
C-7 How is colour specified?
C-8 Should I use a colour specification system for image data?
C-9 What weighting of red, green and blue corresponds to brightness?
C-10 Can blue be assigned fewer bits than red or green?
C-11 What is "luma"?
C-12 What are CIE XYZ components?
C-13 Does my scanner use the CIE spectral curves?
C-14 What are CIE x and y chromaticity coordinates?
C-15 What is white?
C-16 What is colour temperature?
C-17 How can I characterize red, green and blue?
C-18 How do I transform between CIE XYZ and a particular set of RGB
primaries?
C-19 Is RGB always device-dependent?
C-20 How do I transform data from one set of RGB primaries to another?
C-21 Should I use RGB or XYZ for image synthesis?
C-22 What is subtractive colour?
C-23 Why did my grade three teacher tell me that the primaries are red,
yellow and blue?
C-24 Is CMY just one-minus-RGB?
C-25 Why does offset printing use black ink in addition to CMY?
C-26 What are colour differences?
C-27 How do I obtain colour difference components from tristimulus values?
C-28 How do I encode Y'PBPR components?
C-29 How do I encode Y'CBCR components from R'G'B' in [0, +1]?
C-30 How do I encode Y'CBCR components from computer R'G'B' ?
C-31 How do I encode Y'CBCR components from studio video?
C-32 How do I decode R'G'B' from PhotoYCC?
C-33 Will you tell me how to decode Y'UV and Y'IQ?
C-34 How should I test my encoders and decoders?
C-35 What is perceptual uniformity?
C-36 What are HSB and HLS?
C-37 What is true colour?
C-38 What is indexed colour?
C-39 I want to visualize a scalar function of two variables. Should I use
RGB values corresponding to the colours of the rainbow?
C-40 What is dithering?
C-41 How does halftoning relate to colour?
C-42 What's a colour management system?
C-43 How does a CMS know about particular devices?
C-44 Is a colour management system useful for colour specification?
C-45 I'm not a colour expert. What parameters should I use to
code my images?
C-46 References
C-47 Contributors
G-0 WHERE DO THESE DOCUMENTS LIVE?
Each document GammaFAQ and ColorFAQ is available in four formats --
Adobe Acrobat (PDF), hypertext (HTML), PostScript, and plain 7-bit
ASCII text-only. You are reading the concatenation of the text versions
of GammaFAQ and ColorFAQ. The text formats are devoid of graphs and
illustrations, of course; I strongly recommend the PDF versions.
The hypertext version is linked from my colour page,
<http://www.inforamp.net/~poynton/Poynton-colour.html>
The PDF, PostScript and text formats are available by ftp:
<ftp://ftp.inforamp.net/pub/users/poynton/doc/colour/>
The PDF, PostScript and text are mirrored to space provided by
Fraunhofer Computer Graphics in Rhode Island, U.S.A. at
<ftp://elaine.crcg.edu/pub/doc/colour/>
and in Darmstadt, Germany at
<ftp://ftp.igd.fhg.de/pub/doc/colour/>
If you have access to Internet e-mail but not to ftp, use a mailer that
is properly configured with your return address to send mail to
<ftpmail@decwrl.dec.com> with en empty subject and the single word help
in the body.
PDF Notes
Adobe's Acrobat Reader is freely available for Windows, Mac, MS-DOS and
SPARC. If you don't already have a reader, you can obtain one from
<ftp://ftp.adobe.com/pub/adobe/Applications/Acrobat/>
in a subdirectory and file appropriate for your platform.
On CompuServe, GO Acrobat.
On America Online, for Mac, use Keyword Adobe -> Software Libraries ->
Macintosh Libraries -> Mac Utilities/Notes/Drivers, then scroll down to
Adobe Acrobat Reader 2.0.1.sit (2542413 bytes). For Windows, Keyword
Adobe -> Software Libraries -> PC Utilities/Notes/Drivers then scroll
to Adobe Acrobat Reader, ACROREAD.EXE (1438059 bytes).
Transfer PDF files in binary mode, particularly to Windows or MS-DOS
machines.
The PDF files contain "bookmarks" corresponding to the table of contents.
Clicking a bookmark takes you to the topic. Also, cross-references in the
PDF files are links.
PostScript Notes
Acrobat Reader allows viewing on-screen on multiple platforms, printing
to both PostScript and non-PostScript printers, and permits viewing and
printing independent of the fonts that you have installed. But for
those people who cannot or do not wish to run Acrobat Reader, I provide
PostScript versions of the notes.
The documents use only Times, Helvetica, Palatino and Symbol fonts and
are laid out with generous margins for US Letter size paper. I confess
I don't know how well they print to A4 but it should fit. If anyone
using A4 has suggestions to improve the PostScript please let me know.
The PostScript files are compressed with Gnu zip compression, and are
given the file suffix ".gz". Gzip for UNIX (and maybe other platforms
as well) is available from the usual gnu sites. If you use a Macintosh,
the latest freeware StuffIt Expander 3.5.2 will decode gnu zip files.
------------------------------
FREQUENTLY ASKED QUESTIONS ABOUT GAMMA
G-1 WHAT IS INTENSITY?
Intensity is a measure over some interval of the electromagnetic spectrum of
the flow of power that is radiated from, or incident on, a surface.
Intensity is what I call a "linear-light measure", expressed in units such as
watts per square meter.
The voltages presented to a CRT monitor control the intensities of the
colour components, but in a nonlinear manner. CRT voltages are not
proportional to intensity.
Image data stored in a file (TIFF, JFIF, PPM, etc.) may or may not
represent intensity, even if it is so described. The I component of a
color described as HSI (hue, saturation, intensity) does not accurately
represent intensity if HSI is computed according to any of the usual
formulae.
G-2 WHAT IS LUMINANCE?
Brightness is defined by the Commission Internationale de L'Eclairage (CIE)
as the attribute of a visual sensation according to which an area appears
to emit more or less light. Because brightness perception is very complex,
the CIE defined a more tractable quantity luminance, denoted Y, which is
radiant power weighted by a spectral sensitivity function that is
characteristic of vision. To learn about the relationship between physical
spectra and perceived brightness, and other color issues, refer to the
companion Frequently Asked Questions about Colour.
The magnitude of luminance is proportional to physical power. In that sense
it is like intensity. But the spectral composition of luminance is related
to the brightness sensitivity of human vision.
G-3 WHAT IS LIGHTNESS?
Human vision has a nonlinear perceptual response to brightness: a source
having a luminance only 18% of a reference luminance appears about half as
bright. The perceptual response to luminance is called Lightness and is
defined by the CIE [1] as a modified cube root of luminance:
Lstar = -16 + 116 * (pow(Y / Yn), 1. / 3.)
Yn is the luminance of the white reference. If you normalize luminance to
reference white then you need not compute the fraction. The CIE definition
applies a linear segment with a slope of 903.3 near black, for (Y/Yn) <
0.008856. The linear segment is unimportant for practical purposes but if
you don't use it, make sure that you limit L* at zero. L* has a range of 0
to 100, and a "delta L-star" of unity is taken to be roughly the threshold
of visibility.
Stated differently, lightness perception is roughly logarithmic. You can
detect an intensity difference between two patches when the ratio of their
intensities differs by more than about one percent.
Video systems approximate the lightness response of vision using RGB
signals that are each subject to a 0.45 power function. This is comparable
to the 1/3 power function defined by L*.
The L component of a color described as HLS (hue, lightness, saturation)
does not accurately represent lightness if HLS is computed according to
any of the usual formulae. See Frequently Asked Questions about Colour.
G-4 WHAT IS GAMMA?
The intensity of light generated by a physical device is not usually a
linear function of the applied signal. A conventional CRT has a power-law
response to voltage: intensity produced at the face of the display is
approximately the applied voltage, raised to the 2.5 power. The numerical
value of the exponent of this power function is colloquially known as
gamma. This nonlinearity must be compensated in order to achieve correct
reproduction of intensity.
As mentioned above (What is lightness?), human vision has a nonuniform
perceptual response to intensity. If intensity is to be coded into a small
number of steps, say 256, then in order for the most effective perceptual
use to be made of the available codes, the codes must be assigned to
intensities according to the properties of perception.
Here is a graph of an actual CRT's transfer function, at three different
contrast settings:
<< A nice graph is found in the .PDF and .PS versions. >>
This graph indicates a video signal having a voltage from zero to 700 mV.
In a typical eight-bit digital-to-analog converter on a framebuffer card,
black is at code zero and white is at code 255.
Through an amazing coincidence, vision's response to intensity is
effectively the inverse of a CRT's nonlinearity. If you apply a transfer
function to code a signal to take advantage of the properties of lightness
perception - a function similar to the L* function - the coding will be
inverted by a CRT.
G-5 WHAT IS GAMMA CORRECTION?
In a video system, linear-light intensity is transformed to a nonlinear
video signa by gamma correction, which is universally done at the camera.
The Rec. 709 transfer function [2] takes linear-light intensity (here R) to
a nonlinear component (here Rprime), for example, voltage in a video
system:
Rprime = ( R <= 0.018 ?
4.5 * R :
-0.099 + 1.099 * pow(R, 0.45)
);
The linear segment near black minimizes the effect of sensor noise in
practical cameras and scanners. Here is a graph of the Rec. 709 transfer
function, for a signal range from zero to unity:
<< An attractive graph is presented in the .PDF and .PS versions. >>
An idealized monitor inverts the transform:
R = ( Rprime <= 0.081 ?
Rprime / 4.5 :
pow((Rprime + 0.099) / 1.099, 1. / 0.45)
);
Real monitors are not as exact as this equation suggests, and have no linear
segment, but the precise definition is necessary for accurate intermediate
processing in the linear-light domain. In a colour system, an identical
transfer function is applied to each of the three tristimulus
(linear-light) RGB components. See Frequently Asked Questions about
Colour.
By the way, the nonlinearity of a CRT is a function of the electrostatics
of the cathode and the grid of an electron gun; it has nothing to do with
the phosphor. Also, the nonlinearity is a power function (which has the
form f(x) = x^a), not an exponential function (which has the form f(x) =
a^x). For more detail, read Poynton's article [3].
G-6 DOES NTSC USE A GAMMA OF 2.2?
Television is usually viewed in a dim environment. If an images's correct
physical intensity is reproduced in a dim surround, a subjective effect
called simultaneous contrast causes the reproduced image to appear lacking
in contrast. The effect can be overcome by applying an end-to-end power
function whose exponent is about 1.1 or 1.2. Rather than having each
receiver provide this correction, the assumed 2.5-power at the CRT is
under-corrected at the camera by using an exponent of about 1/2.2 instead
of 1/2.5. The assumption of a dim viewing environment is built into video
coding.
G-7 DOES PAL USE A GAMMA OF 2.8?
Standards for 625/50 systems mention an exponent of 2.8 at the decoder,
however this value is unrealistically high to be used in practice. If an
exponent different from 0.45 is chosen for a power function with a linear
segment near black like Rec. 709, the other parameters need to be changed
to maintain function and tangent continuity.
G-8 I PULLED AN IMAGE OFF THE NET AND IT LOOKS MURKY.
If an image originates in linear-light form, gamma correction needs to be
applied exactly once. If gamma correction is not applied and linear-light
image data is applied to a CRT, the midtones will be reproduced too dark.
If gamma correction is applied twice, the midtones will be too light.
G-9 I PULLED AN IMAGE OFF THE NET AND IT LOOKS A LITTLE TOO CONTRASTY.
Viewing environments typical of computing are quite bright. When an image
is coded according to video standards it implicitly carries the assumption
of a dim surround. If it is displayed without correction in a bright
ambient, it will appear contrasty. In this circumstance you should apply a
power function with an exponent of about 1/1.1 or 1/1.2 to correct for your
bright surround.
Ambient lighting is rarely taken into account in the exchange of computer
images. If an image is created in a dark environment and transmitted to a
viewer in a bright environment, the recipient will find it to have
excessive contrast.
If an image originated in a bright environment and viewed in a bright
environment, it will need no modification no matter what coding is applied.
But then it will carry an assumption of a bright surround. Video standards
are widespread and well optimized for vision, so it makes sense to code
with a power function of 0.45 and retain a single standard for the assumed
viewing environment.
In the long term, for everyone to get the best results in image interchange
among applications, an image originator should remove the effect of his
ambient environment when he transmits an image. The recipient of an image
should insert a transfer function appropriate for his viewing environment.
In the short term, you should include with your image data tags that
specify the parameters that you used to encode. TIFF 6.0 has provisions for
this data. You can correct for your own viewing environment as appropriate,
but until image interchange standards incorporate viewing conditions, you
will also have to compensate for the originator's viewing conditions.
G-10 WHAT IS LUMA?
In video it is standard to represent brightness information not as a
nonlinear function of true CIE luminance, but as a weighted sum of
nonlinear R'G'B' components called luma. For more information, consult the
companion document Frequently Asked Questions about Colour.
G-11 WHAT IS CONTRAST RATIO?
Contrast ratio is the ratio of intensity between the brightest white and
the darkest black of a particular device or a particular environment.
Projected cinema film - or a photographic reflection print - has a contrast
ratio of about 80:1. Television assumes a contrast ratio - in your living
room - of about 30:1. Typical office viewing conditions restrict contrast
ratio of CRT display to about 5:1.
G-12 HOW MANY BITS DO I NEED TO SMOOTHLY SHADE FROM BLACK TO WHITE?
At a particular level of adaptation, human vision responds to about a
hundred-to-one contrast ratio of intensity from white to black. Call these
intensities 100 and 1. Within this range, vision can detect that two
intensities are different if the ratio between them exceeds about 1.01,
corresponding to a contrast sensitivity of one percent.
To shade smoothly over this range, so as to produce no perceptible steps,
at the black end of the scale it is necessary to have coding that
represents different intensity levels 1.00, 1.01, 1.02 and so on. If linear
light coding is used, the "delta" of 0.01 must be maintained all the way up
the scale to white. This requires about 9,900 codes, or about fourteen bits
per component.
If you use nonlinear coding, then the 1.01 "delta" required at the black
end of the scale applies as a ratio, not an absolute increment, and
progresses like compound interest up to white. This results in about 460
codes, or about nine bits per component. Eight bits, nonlinearly coded
according to Rec. 709, is sufficient for broadcast-quality digital
television at a contrast ratio of about 50:1.
If poor viewing conditions or poor display quality restrict the contrast
ratio of the display, then fewer bits can be employed.
If a linear light system is quantized to a small number of bits, with black
at code zero, then the ability of human vision to discern a 1.01 ratio
between adjacent intensity levels takes effect below code 100. If a linear
light system has only eight bits, then the top end of the scale is only
255, and contouring in dark areas will be perceptible even in very poor
viewing conditions.
G-13 HOW IS GAMMA HANDLED IN VIDEO, COMPUTER GRAPHICS AND DESKTOP
COMPUTING?
As outlined above, gamma correction in video effectively codes into a
perceptually uniform domain. In video, a 0.45-power function is applied at
the camera, as shown in the top row of this diagram:
<< A nice diagram is presented in the .PDF and .PS versions. >>
Synthetic computer graphics calculates the interaction of light and
objects. These interactions are in the physical domain, and must be
calculated in linear-light values. It is conventional in computer graphics
to store linear-light values in the framebuffer, and introduce gamma
correction at the lookup table at the output of the framebuffer. This is
illustrated in the middle row above.
If linear-light is represented in just eight bits, near black the steps
between codes will be perceptible as banding in smoothly-shaded images.
This is the eight-bit bottleneck in the sketch.
Desktop computers are optimized neither for image synthesis nor for video.
They have programmable "gamma" and either poor standards or no standards.
Consequently, image interchange among desktop computers is fraught with
difficulty.
G-14 WHAT IS THE GAMMA OF A MACINTOSH?
Apple offers no definition of the nonlinearity - or loosely speaking, gamma
- that is intrinsic in QuickDraw. But the combination of a default
QuickDraw lookup table and a standard monitor causes intensity to represent
the 1.8-power of the R, G and B values presented to QuickDraw. It is
wrongly believed that Macintosh computers use monitors whose transfer
function is different from the rest of the industry. The unconventional
QuickDraw handling of nonlinearity is the root of this misconception.
Macintosh coding is shown in the bottom row of the diagram
<< provided in the PDF and PS versions >>.
The transfer of image data in computing involves various transfer
functions: at coding, in the framebuffer, at the lookup table, and at the
monitor. Strictly speaking the term gamma applies to the exponent of the
power function at the monitor. If you use the term loosely, in the case of
a Mac you could call the gamma 1.4, 1.8 or 2.5 depending which part of the
system you were discussing. More detail is available [4].
I recommend using the Rec. 709 transfer function, with its 0.45-power law,
for best perceptual performance and maximum ease of interchange with
digital video. If you need Mac compatibility you will have to code
intensity with a 1/1.8-power law, anticipating QuickDraw's 1/1.4-power in
the lookup table. This coding has adequate performance in the bright
viewing environments typical of desktop applications, but suffers in darker
viewing conditions that have high contrast ratio.
G-15 DOES THE GAMMA OF CRTS VARY WILDLY?
Gamma of a properly adjusted conventional CRT varies anywhere between about
2.35 and 2.55.
CRTs have acquired a reputation for wild variation for two reasons. First,
if the model intensity=voltage^gamma is naively fitted to a display with
black-level error, the exponent deduced will be as much a function of the
black error as the true exponent. Second, input devices, graphics libraries
and application programs all have the potential to introduce their own
transfer functions. Nonlinearities from these sources are often categorized
as gamma and attributed to the display.
G-16 HOW SHOULD I ADJUST MY MONITOR'S BRIGHTNESS AND CONTRAST CONTROLS?
On a CRT monitor, the control labelled contrast controls overall intensity,
and the control labelled brightness controls offset (black level). Display
a picture that is predominantly black. Adjust brightness so that the
monitor reproduces true black on the screen, just at the threshold where it
is not so far down as to "swallow" codes greater than the black code, but
not so high that the picture sits on a "pedestal" of dark grey. When the
critical point is reached, put a piece of tape over the brightness control.
Then set contrast to suit your preference for display intensity.
For more information, consult "Black Level" and "Picture",
<ftp://ftp.inforamp.net/pub/users/poynton/doc/colour/Black_and_Picture.pdf>.
G-17 SHOULD I DO IMAGE PROCESSING OPERATIONS ON LINEAR OR NONLINEAR IMAGE
DATA?
If you wish to simulate the physical world, linear-light coding is
necessary. For example, if you want to produce a numerical simulation of a
lens performing a Fourier transform, you should use linear coding. If you
want to compare your model with the transformed image captured from a real
lens by a video camera, you will have to "remove" the nonlinear gamma
correction that was imposed by the camera, to convert the image data back
into its linear-light representation.
On the other hand, if your computation involves human perception, a
nonlinear representation may be required. For example, if you perform a
discrete cosine transform on image data as the first step in image
compression, as in JPEG, then you ought to use nonlinear coding that
exhibits perceptual uniformity, because you wish to minimize the
perceptibility of the errors that will be introduced during quantization.
The image processing literature rarely discriminates between linear and
nonlinear coding. In the JPEG and MPEG standards there is no mention of
transfer function, but nonlinear (video-like) coding is implicit:
unacceptable results are obtained when JPEG or MPEG are applied to
linear-light data. In computer graphic standards such as PHIGS and CGM
there is no mention of transfer function, but linear-light coding is
implicit. These discrepancies make it very difficult to exchange image data
between systems.
When you ask a video engineer if his system is linear, he will say "Of
course!" referring to linear voltage. If you ask an optical engineer if her
system is linear, she will say "Of course!" referring to linear intensity.
But when a nonlinear transform lies between the two systems, as in video, a
linear transformation performed in one domain is not linear in the other.
G-18 WHAT'S THE TRANSFER FUNCTION OF OFFSET PRINTING?
A image destined for halftone printing conventionally specifies each pixel
in terms of dot percentage in film. An imagesetter's halftoning machinery
generates dots whose areas are proportional to the requested coverage. In
principle, dot percentage in film is inversely proportional to linear-light
reflectance.
Two phenomena distort the requested dot coverage values. First, printing
involves a mechanical smearing of the ink that causes dots to enlarge.
Second, optical effects within the bulk of the paper cause more light to be
absorbed than would be expected from the surface coverage of the dot alone.
These phenomena are collected under the term dot gain, which is the
percentage by which the light absorption of the printed dots exceeds the
requested dot coverage.
Standard offset printing involves a dot gain at 50% of about 24%: when 50%
absorption is requested, 74% absorption is obtained. The midtones print
darker than requested. This results in a transfer function from code to
reflectance that closely resembles the voltage-to-light curve of a CRT.
Correction of dot gain is conceptually similar to gamma correction in
video: physical correction of the "defect" in the reproduction process is
very well matched to the lightness perception of human vision. Coding an
image in terms of dot percentage in film involves coding into a roughly
perceptually uniform space. The standard dot gain functions employed in
North America and Europe correspond to intensity being reproduced as a
power function of the digital code, where the numerical value of the
exponent is about 1.75, compared to about 2.2 for video. This is lower than
the optimum for perception, but works well for the low contrast ratio of
offset printing.
The Macintosh has a power function that is close enough to printing practice
that raw QuickDraw codes sent to an imagesetter produce acceptable results.
High-end publishing software allows the user to specify the parameters of
dot gain compensation.
I have described the linearity of conventional offset printing. Other
halftoned devices have different characteristics, and require different
corrections.
G-19 REFERENCES
[1] Publication CIE No 15.2, Colorimetry, Second Edition (1986), Central
Bureau of the Commission Internationale de L'Eclairage, Vienna, Austria.
[2] ITU-R Recommendation BT.709, Basic Parameter Values for the HDTV
Standard for the Studio and for International Programme Exchange (1990),
[formerly CCIR Rec. 709], ITU, 1211 Geneva 20, Switzerland.
[3] Charles A. Poynton, "Gamma and Its Disguises" in Journal of the Society
of Motion Picture and Television Engineers, Vol. 102, No. 12 (December
1993), 1099-1108.
[4] Charles A. Poynton, "Gamma on the Apple Macintosh",
<ftp://ftp.inforamp.net/pub/users/poynton/doc/Mac/>.
------------------------------
FREQUENTLY ASKED QUESTIONS ABOUT COLOR
C-1 WHAT IS COLOUR?
Colour is the perceptual result of light in the visible region of the
spectrum, having wavelengths in the region of 400 nm to 700 nm, incident
upon the retina. Physical power (or radiance) is expressed in a spectral
power distribution (SPD), often in 31 components each representing a 10 nm
band.
The human retina has three types of colour photoreceptor cone cells, which
respond to incident radiation with somewhat different spectral response
curves. A fourth type of photoreceptor cell, the rod, is also present in
the retina. Rods are effective only at extremely low light levels
(colloquially, night vision), and although important for vision play no
role in image reproduction.
Because there are exactly three types of colour photoreceptor, three
numerical components are necessary and sufficient to describe a colour,
providing that appropriate spectral weighting functions are used. This is
the concern of the science of colorimetry. In 1931, the Commission
Internationale de L'Eclairage (CIE) adopted standard curves for a
hypothetical Standard Observer. These curves specify how an SPD can be
transformed into a set of three numbers that specifies a colour.
The CIE system is immediately and almost universally applicable to
self-luminous sources and displays. However the colours produced by
reflective systems such as photography, printing or paint are a function
not only of the colourants but also of the SPD of the ambient illumination.
If your application has a strong dependence upon the spectrum of the
illuminant, you may have to resort to spectral matching.
Sir Isaac Newton said, "Indeed rays, properly expressed, are not coloured."
SPDs exist in the physical world, but colour exists only in the eye and the
brain.
C-2 WHAT IS INTENSITY?
Intensity is a measure over some interval of the electromagnetic spectrum
of the flow of power that is radiated from, or incident on, a surface.
Intensity is what I call a linear-light measure, expressed in units such as
watts per square meter.
The voltages presented to a CRT monitor control the intensities of the
colour components, but in a nonlinear manner. CRT voltages are not
proportional to intensity.
C-3 WHAT IS LUMINANCE?
Brightness is defined by the CIE as the attribute of a visual sensation
according to which an area appears to emit more or less light. Because
brightness perception is very complex, the CIE defined a more tractable
quantity luminance which is radiant power weighted by a spectral
sensitivity function that is characteristic of vision. The luminous
efficiency of the Standard Observer is defined numerically, is everywhere
positive, and peaks at about 555 nm. When an SPD is integrated using this
curve as a weighting function, the result is CIE luminance, denoted Y.
The magnitude of luminance is proportional to physical power. In that sense
it is like intensity. But the spectral composition of luminance is related
to the brightness sensitivity of human vision.
Strictly speaking, luminance should be expressed in a unit such as candelas
per meter squared, but in practice it is often normalized to 1 or 100 units
with respect to the luminance of a specified or implied white reference.
For example, a studio broadcast monitor has a white reference whose
luminance is about 80 cd*m -2, and Y = 1 refers to this value.
C-4 WHAT IS LIGHTNESS?
Human vision has a nonlinear perceptual response to brightness: a source
having a luminance only 18% of a reference luminance appears about half as
bright. The perceptual response to luminance is called Lightness. It is
denoted L* and is defined by the CIE as a modified cube root of luminance:
Lstar = -16 + 116 * (pow(Y / Yn), 1. / 3.)
Yn is the luminance of the white reference. If you normalize luminance to
reference white then you need not compute the fraction. The CIE definition
applies a linear segment with a slope of 903.3 near black, for (Y/Yn) <=
0.008856. The linear segment is unimportant for practical purposes but if
you don't use it, make sure that you limit L* at zero. L* has a range of 0
to 100, and a "delta L-star" of unity is taken to be roughly the threshold
of visibility.
Stated differently, lightness perception is roughly logarithmic. An
observer can detect an intensity difference between two patches when their
intensities differ by more than one about percent.
Video systems approximate the lightness response of vision using R'G'B'
signals that are each subject to a 0.45 power function. This is comparable
to the 1/3 power function defined by L*.
C-5 WHAT IS HUE?
According to the CIE [1], hue is the attribute of a visual sensation
according to which an area appears to be similar to one of the perceived
colours, red, yellow, green and bue, or a combination of two of them.
Roughly speaking, if the dominant wavelength of an SPD shifts, the hue of
the associated colour will shift.
C-6 WHAT IS SATURATION?
Again from the CIE, saturation is the colourfulness of an area judged in
proportion to its brightness. Saturation runs from neutral gray through
pastel to saturated colours. Roughly speaking, the more an SPD is
concentrated at one wavelength, the more saturated will be the associated
colour. You can desaturate a colour by adding light that contains power at
all wavelengths.
C-7 HOW IS COLOUR SPECIFIED?
The CIE system defines how to map an SPD to a triple of numerical
components that are the mathematical coordinates of colour space. Their
function is analagous to coordinates on a map. Cartographers have different
map projections for different functions: some map projections preserve
areas, others show latitudes and longitudes as straight lines. No single
map projection fills all the needs of map users. Similarly, no single
colour system fills all of the needs of colour users.
The systems useful today for colour specification include CIE XYZ, CIE xyY,
CIE L*u*v* and CIE L*a*b*. Numerical values of hue and saturation are not
very useful for colour specification, for reasons to be discussed in
section 36.
A colour specification system needs to be able to represent any colour with
high precision. Since few colours are handled at a time, a specification
system can be computationally complex. Any system for colour specification
must be intimately related to the CIE specifications.
You can specify a single "spot" colour using a colour order system such as
Munsell. Systems like Munsell come with swatch books to enable visual
colour matches, and have documented methods of transforming between
coordinates in the system and CIE values. Systems like Munsell are not
useful for image data. You can specify an ink colour by specifying the
proportions of standard (or secret) inks that can be mixed to make the
colour. That's how pantone(tm) works. Although widespread, it's
proprietary. No translation to CIE is publicly available.
C-8 SHOULD I USE A COLOUR SPECIFICATION SYSTEM FOR IMAGE DATA?
A digitized colour image is represented as an array of pixels, where each
pixel contains numerical components that define a colour. Three components
are necessary and sufficient for this purpose, although in printing it is
convenient to use a fourth (black) component.
In theory, the three numerical values for image coding could be provided by
a colour specification system. But a practical image coding system needs to
be computationally efficient, cannot afford unlimited precision, need not
be intimately related to the CIE system and generally needs to cover only a
reasonably wide range of colours and not all of the colours. So image
coding uses different systems than colour specification.
The systems useful for image coding are linear RGB, nonlinear R'G'B',
nonlinear CMY, nonlinear CMYK, and derivatives of nonlinear R'G'B' such
as Y'CBCR. Numerical values of hue and saturation are not useful in colour
image coding.
If you manufacture cars, you have to match the colour of paint on the door
with the colour of paint on the fender. A colour specification system will
be necessary. But to convey a picture of the car, you need image coding.
You can afford to do quite a bit of computation in the first case because
you have only two coloured elements, the door and the fender. In the second
case, the colour coding must be quite efficient because you may have a
million coloured elements or more.
For a highly readable short introduction to colour image coding, see
DeMarsh and Giorgianni [2]. For a terse, complete technical treatment, read
Schreiber [3].
C-9 WHAT WEIGHTING OF RED, GREEN AND BLUE CORRESPONDS TO BRIGHTNESS?
Direct acquisition of luminance requires use of a very specific spectral
weighting. However, luminance can also be computed as a weighted sum of
red, green and blue components.
If three sources appear red, green and blue, and have the same radiance in
the visible spectrum, then the green will appear the brightest of the three
because the luminous efficiency function peaks in the green region of the
spectrum. The red will appear less bright, and the blue will be the darkest
of the three. As a consequence of the luminous efficiency function, all
saturated blue colours are quite dark and all saturated yellows are quite
light. If luminance is computed from red, green and blue, the coefficients
will be a function of the particular red, green and blue spectral weighting
functions employed, but the green coefficient will be quite large, the red
will have an intermediate value, and the blue coefficient will be the
smallest of the three.
Contemporary CRT phosphors are standardized in Rec. 709 [8], to be
described in section 17. The weights to compute true CIE luminance from
linear red, green and blue (indicated without prime symbols), for the Rec.
709, are these:
Y = 0.212671 * R + 0.715160 * G + 0.072169 * B;
This computation assumes that the luminance spectral weighting can be
formed as a linear combination of the scanner curves, and assumes that the
component signals represent linear-light. Either or both of these
conditions can be relaxed to some extent depending on the application.
Some computer systems have computed brightness using (R+G+B)/3. This is at
odds with the properties of human vision, as will be discussed under What
are HSB and HLS? in section 36.
The coefficients 0.299, 0.587 and 0.114 properly computed luminance for
monitors having phosphors that were contemporary at the introduction of
NTSC television in 1953. They are still appropriate for computing video
luma to be discussed below in section 11. However, these coefficients do
not accurately compute luminance for contemporary monitors.
C-10 CAN BLUE BE ASSIGNED FEWER BITS THAN RED OR GREEN?
Blue has a small contribution to the brightness sensation. However, human
vision has extraordinarily good colour discrimination capability in blue
colours. So if you give blue fewer bits than red or green, you will
introduce noticeable contouring in blue areas of your pictures.
C-11 WHAT IS "LUMA"?
It is useful in a video system to convey a component representative of
luminance and two other components representative of colour. It is
important to convey the component representative of luminance in such a way
that noise (or quantization) introduced in transmission, processing and
storage has a perceptually similar effect across the entire tone scale from
black to white. The ideal way to accomplish these goals would be to form a
luminance signal by matrixing RGB, then subjecting luminance to a nonlinear
transfer function similar to the L* function.
There are practical reasons in video to perform these operations in the
opposite order. First a nonlinear transfer function - gamma correction - is
applied to each of the linear R, G and B. Then a weighted sum of the
nonlinear components is computed to form a signal representative of
luminance. The resulting component is related to brightness but is not CIE
luminance. Many video engineers call it luma and give it the symbol Y'. It
is often carelessly called luminance and given the symbol Y. You must be
careful to determine whether a particular author assigns a linear or
nonlinear interpretation to the term luminance and the symbol Y.
The coefficients that correspond to the "NTSC" red, green and blue CRT
phosphors of 1953 are standardized in ITU-R Recommendation BT. 601-2
(formerly CCIR Rec. 601-2). I call it Rec. 601. To compute nonlinear video
luma from nonlinear red, green and blue:
Yprime = 0.299 * Rprime + 0.587 * Gprime + 0.114 * Bprime;
The prime symbols in this equation, and in those to follow, denote
nonlinear components.
C-12 WHAT ARE CIE XYZ COMPONENTS?
The CIE system is based on the description of colour as a luminance
component Y, as described above, and two additional components X and Z. The
spectral weighting curves of X and Z have been standardized by the CIE
based on statistics from experiments involving human observers. XYZ
tristimulus values can describe any colour. (RGB tristimulus values will be
described later.)
The magnitudes of the XYZ components are proportional to physical energy,
but their spectral composition corresponds to the colour matching
characteristics of human vision.
The CIE system is defined in Publication CIE No 15.2, Colorimetry, Second
Edition (1986) [4].
C-13 DOES MY SCANNER USE THE CIE SPECTRAL CURVES?
Probably not. Scanners are most often used to scan images such as colour
photographs and colour offset prints that are already "records" of three
components of colour information. The usual task of a scanner is not
spectral analysis but extraction of the values of the three components that
have already been recorded. Narrowband filters are more suited to this task
than filters that adhere to the principles of colorimetry.
If you place on your scanner an original coloured object that has
"original" SPDs that are not already a record of three components, chances
are your scanner will not very report accurate RGB values. This is because
most scanners do not conform very closely to CIE standards.
C-14 WHAT ARE CIE x AND y CHROMATICITY COORDINATES?
It is often convenient to discuss "pure" colour in the absence of
brightness. The CIE defines a normalization process to compute "little" x
and y chromaticity coordinates:
x = X / (X + Y + Z);
y = Y / (X + Y + Z);
A colour plots as a point in an (x, y) chromaticity diagram. When a
narrowband SPD comprising power at just one wavelength is swept across the
range 400 nm to 700 nm, it traces a shark-fin shaped spectral locus in (x,
y) coordinates. The sensation of purple cannot be produced by a single
wavelength: to produce purple requires a mixture of shortwave and longwave
light. The line of purples on a chromaticity diagram joins extreme blue to
extreme red. All colours are contained in the area in (x, y) bounded by the
line of purples and the spectral locus.
A colour can be specified by its chromaticity and luminance, in the form of
an xyY triple. To recover X and Z from chromaticities and luminance, use
these relations:
X = (x / y) * Y;
Z = (1 - x - y) / y * Y;
The bible of colour science is Wyszecki and Styles, Color Science [5]. But
it's daunting. For Wyszecki's own condensed version, see Color in Business,
Science and Industry, Third Edition [6]. It is directed to the colour
industry: ink, paint and the like. For an approachable introduction to the
same theory, accompanied by descriptions of image reproduction, try to find
a copy of R.W.G. Hunt, The Reproduction of Colour [7]. But sorry to report,
as I write this, it's out of print.
C-15 WHAT IS WHITE?
In additive image reproduction, the white point is the chromaticity of the
colour reproduced by equal red, green and blue components. White point is a
function of the ratio (or balance) of power among the primaries. In
subtractive reproduction, white is the SPD of the illumination, multiplied
by the SPD of the media. There is no unique physical or perceptual
definition of white, so to achieve accurate colour interchange you must
specify the characteristics of your white.
It is often convenient for purposes of calculation to define white as a
uniform SPD. This white reference is known as the equal-energy illuminant,
or CIE Illuminant E.
A more realistic reference that approximates daylight has been specified
numerically by the CIE as Illuminant D65. You should use this unless you
have a good reason to use something else. The print industry commonly uses
D50 and photography commonly uses D55. These represent compromises between
the conditions of indoor (tungsten) and daylight viewing.
C-16 WHAT IS COLOUR TEMPERATURE?
Planck determined that the SPD radiated from a hot object - a black body
radiator - is a function of the temperature to which the object is heated.
Many sources of illumination have, at their core, a heated object, so it is
often useful to characterize an illuminant by specifying the temperature
(in units of kelvin, K) of a black body radiator that appears to have the
same hue.
Although an illuminant can be specified informally by its colour
temperature, a more complete specification is provided by the chromaticity
coordinates of the SPD of the source.
Modern blue CRT phosphors are more efficient with respect to human vision
than red or green. In a quest for brightness at the expense of colour
accuracy, it is common for a computer display to have excessive blue
content, about twice as blue as daylight, with white at about 9300 K.
Human vision adapts to white in the viewing environment. An image viewed in
isolation - such as a slide projected in a dark room - creates its own
white reference, and a viewer will be quite tolerant of errors in the white
point. But if the same image is viewed in the presence of an external white
reference or a second image, then differences in white point can be
objectionable.
Complete adaptation seems to be confined to the range 5000 K to 5500 K. For
most people, D65 has a little hint of blue. Tungsten illumination, at about
3200 K, always appears somewhat yellow.
C-17 HOW CAN I CHARACTERIZE RED, GREEN AND BLUE?
Additive reproduction is based on physical devices that produce
all-positive SPDs for each primary. Physically and mathematically, the
spectra add. The largest range of colours will be produced with primaries
that appear red, green and blue. Human colour vision obeys the principle of
superposition, so the colour produced by any additive mixture of three
primary spectra can be predicted by adding the corresponding fractions of
the XYZ components of the primaries: the colours that can be mixed from a
particular set of RGB primaries are completely determined by the colours of
the primaries by themselves. Subtractive reproduction is much more
complicated: the colours of mixtures are determined by the primaries and by
the colours of their combinations.
An additive RGB system is specified by the chromaticities of its primaries
and its white point. The extent (gamut) of the colours that can be mixed
from a given set of RGB primaries is given in the (x, y) chromaticity
diagram by a triangle whose vertices are the chromaticities of the
primaries.
In computing there are no standard primaries or white point. If you have an
RGB image but have no information about its chromaticities, you cannot
accurately reproduce the image.
The NTSC in 1953 specified a set of primaries that were representative of
phosphors used in colour CRTs of that era. But phosphors changed over the
years, primarily in response to market pressures for brighter receivers,
and by the time of the first the videotape recorder the primaries in use
were quite different than those "on the books". So although you may see the
NTSC primary chromaticities documented, they are of no use today.
Contemporary studio monitors have slightly different standards in North
America, Europe and Japan. But international agreement has been obtained on
primaries for high definition television (HDTV), and these primaries are
closely representative of contemporary monitors in studio video, computing
and computer graphics. The primaries and the D65 white point of Rec. 709
[8] are:
x y z
R 0.6400 0.3300 0.0300
G 0.3000 0.6000 0.1000
B 0.1500 0.0600 0.7900
white 0.3127 0.3290 0.3582
For a discussion of nonlinear RGB in computer graphics, see Lindbloom [9].
For technical details on monitor calibration, consult Cowan [10].
C-18 HOW DO I TRANSFORM BETWEEN CIE XYZ AND A PARTICULAR SET OF RGB
PRIMARIES?
RGB values in a particular set of primaries can be transformed to and from
CIE XYZ by a three-by-three matrix transform. These transforms involve
tristimulus values, that is, sets of three linear-light components that
conform to the CIE colour matching functions. CIE XYZ is a special case of
tristimulus values. In XYZ, any colour is represented by a positive set of
values.
Details can be found in SMPTE RP 177-1993 [11].
To transform from CIE XYZ into Rec. 709 RGB (with its D65 white point), put
an XYZ column vector to the right of this matrix, and multiply:
[ R709 ] [ 3.240479 -1.53715 -0.498535 ] [ X ]
[ G709 ]=[-0.969256 1.875991 0.041556 ]*[ Y ]
[ B709 ] [ 0.055648 -0.204043 1.057311 ] [ Z ]
As a convenience to C programmers, here are the coefficients as a C array:
{{ 3.240479,-1.53715 ,-0.498535},
{-0.969256, 1.875991, 0.041556},
{ 0.055648,-0.204043, 1.057311}}
This matrix has some negative coefficients: XYZ colours that are out of
gamut for a particular RGB transform to RGB where one or more RGB
components is negative or greater than unity.
Here's the inverse matrix. Because white is normalized to unity, the
middle row sums to unity:
[ X ] [ 0.412453 0.35758 0.180423 ] [ R709 ]
[ Y ]=[ 0.212671 0.71516 0.072169 ]*[ G709 ]
[ Z ] [ 0.019334 0.119193 0.950227 ] [ B709 ]
{{ 0.412453, 0.35758 , 0.180423},
{ 0.212671, 0.71516 , 0.072169},
{ 0.019334, 0.119193, 0.950227}}
To recover primary chromaticities from such a matrix, compute little x and
y for each RGB column vector. To recover the white point, transform RGB=[1,
1, 1] to XYZ, then compute x and y.
C-19 IS RGB ALWAYS DEVICE-DEPENDENT?
Video standards specify abstract R'G'B' systems that are closely
matched to the characteristics of real monitors. Physical devices that
produce additive colour involve tolerances and uncertainties, but if you
have a monitor that conforms to Rec. 709 within some tolerance, you can
consider the monitor to be device-independent.
The importance of Rec. 709 as an interchange standard in studio video,
broadcast television and high definition television, and the perceptual
basis of the standard, assures that its parameters will be used even by
devices such as flat-panel displays that do not have the same physics as
CRTs.
C-20 HOW DO I TRANSFORM DATA FROM ONE SET OF RGB PRIMARIES TO ANOTHER?
RGB values in a system employing one set of primaries can be transformed
into another set by a three-by-three linear-light matrix transform.
Generally these matrices are normalized for a white point luminance of
unity. For details, see Television Engineering Handbook [12].
As an example, here is the transform from SMPTE 240M (or SMPTE RP 145) RGB
to Rec. 709:
[ R709 ] [ 0.939555 0.050173 0.010272 ] [ R240M ]
[ G709 ]=[ 0.017775 0.965795 0.01643 ]*[ G240M ]
[ B709 ] [-0.001622 -0.004371 1.005993 ] [ B240M ]
{{ 0.939555, 0.050173, 0.010272},
{ 0.017775, 0.965795, 0.01643 },
{-0.001622,-0.004371, 1.005993}}
All of these terms are close to either zero or one. In a case like this, if
the transform is computed in the nonlinear (gamma-corrected) R'G'B'
domain the resulting errors will be insignificant.
Here's another example. To transform EBU 3213 RGB to Rec. 709:
[ R709 ] [ 1.044036 -0.044036 0. ] [ R240M ]
[ G709 ]=[ 0. 1. 0. ]*[ G240M ]
[ B709 ] [ 0. 0.011797 0.988203 ] [ B240M ]
{{ 1.044036,-0.044036, 0. },
{ 0. , 1. , 0. },
{ 0. , 0.011797, 0.988203}}
Transforming among RGB systems may lead to an out of gamut RGB result where
one or more RGB components is negative or greater than unity.
C-21 SHOULD I USE RGB OR XYZ FOR IMAGE SYNTHESIS?
Once light is on its way to the eye, any tristimulus-based system will
work. But the interaction of light and objects involves spectra, not
tristimulus values. In synthetic computer graphics, the calculations are
actually simulating sampled SPDs, even if only three components are used.
Details concerning the resultant errors are found in Hall [13].
C-22 WHAT IS SUBTRACTIVE COLOUR?
Subtractive systems involve coloured dyes or filters that absorb power from
selected regions of the spectrum. The three filters are placed in tandem. A
dye that appears cyan absobs longwave (red) light. By controlling the
amount of cyan dye (or ink), you modulate the amount of red in the image.
In physical terms the spectral transmission curves of the colourants
multiply, so this method of colour reproduction should really be called
"multiplicative". Photographers and printers have for decades measured
transmission in base-10 logarithmic density units, where transmission of
unity corresponds to a density of 0, transmission of 0.1 corresponds to a
density of 1, transmission of 0.01 corresponds to a density of 2 and so on.
When a printer or photographer computes the effect of filters in tandem, he
subtracts density values instead of multiplying transmission values, so he
calls the system subtractive.
To achieve a wide range of colours in a subtractive system requires filters
that appear coloured cyan, yellow and magenta (CMY). Cyan in tandem with
magenta produces blue, cyan with yellow produces green, and magenta with
yellow produces red. Smadar Nehab suggests this memory aid:
----+ ----------+
R | G B R G | B
| |
Cy | Mg Yl Cy Mg | Yl
+---------- +-----
Additive primaries are at the top, subtractive at the bottom. On the left,
magenta and yellow filters combine to produce red. On the right, red and
green sources add to produce yellow.
C-23 WHY DID MY GRADE THREE TEACHER TELL ME THAT THE PRIMARIES ARE RED,
YELLOW AND BLUE?
To get a wide range of colours in an additive system, the primaries must
appear red, green and blue (RGB). In a subtractive system the primaries
must appear yellow, cyan and magenta (CMY). It is complicated to predict
the colours produced when mixing paints, but roughly speaking, paints mix
additively to the extent that they are opaque (like oil paints), and
subtractively to the extent that they are transparent (like watercolours).
This question also relates to colour names: your grade three "red" was
probably a little on the magenta side, and "blue" was probably quite cyan.
For a discussion of paint mixing from a computer graphics perspective,
consult Haase [14].
C-24 IS CMY JUST ONE-MINUS-RGB?
In a theoretical subtractive system, CMY filters could have spectral
absorption curves with no overlap. The colour reproduction of the system
would correspond exactly to additive colour reproduction using the red,
green and blue primaries that resulted from pairs of filters in
combination.
Practical photographic dyes and offset printing inks have spectral
absorption curves that overlap significantly. Most magenta dyes absorb
mediumwave (green) light as expected, but incidentally absorb about half
that amount of shortwave (blue) light. If reproduction of a colour, say
brown, requires absorption of all shortwave light then the incidental
absorption from the magenta dye is not noticed. But for other colours, the
"one minus RGB" formula produces mixtures with much less blue than
expected, and therefore produce pictures that have a yellow cast in the mid
tones. Similar but less severe interactions are evident for the other pairs
of practical inks and dyes.
Due to the spectral overlap among the colourants, converting CMY using the
"one-minus-RGB" method works for applications such as business graphics
where accurate colour need not be preserved, but the method fails to
produce acceptable colour images.
Multiplicative mixture in a CMY system is mathematically nonlinear, and the
effect of the unwanted absorptions cannot be easily analyzed or
compensated. The colours that can be mixed from a particular set of CMY
primaries cannot be determined from the colours of the primaries
themselves, but are also a function of the colours of the sets of
combinations of the primaries.
Print and photographic reproduction is also complicated by nonlinearities
in the response of the three (or four) channels. In offset printing, the
physical and optical processes of dot gain introduce nonlinearity that is
roughly comparable to gamma correction in video. In a typical system used
for print, a black code of 128 (on a scale of 0 to 255) produces a
reflectance of about 0.26, not the 0.5 that you would expect from a linear
system. Computations cannot be meaningfully performed on CMY components
without taking nonlinearity into account.
For a detailed discussion of transferring colorimetric image data to print
media, see Stone [15].
C-25 WHY DOES OFFSET PRINTING USE BLACK INK IN ADDITION TO CMY?
Printing black by overlaying cyan, yellow and magenta ink in offset
printing has three major problems. First, coloured ink is expensive.
Replacing coloured ink by black ink - which is primarily carbon - makes
economic sense. Second, printing three ink layers causes the printed paper
to become quite wet. If three inks can be replaced by one, the ink will dry
more quickly, the press can be run faster, and the job will be less
expensive. Third, if black is printed by combining three inks, and
mechanical tolerances cause the three inks to be printed slightly out of
register, then black edges will suffer coloured tinges. Vision is most
demanding of spatial detail in black and white areas. Printing black with a
single ink minimizes the visibility of registration errors.
Other printing processes may or may not be subject to similar constraints.
C-26 WHAT ARE COLOUR DIFFERENCES?
This term is ambiguous. In its first sense, colour difference refers to
numerical differences between colour specifications. The perception of
colour differences in XYZ or RGB is highly nonuniform. The study of
perceptual uniformity concerns numerical differences that correspond to
colour differences at the threshold of perceptibility (just noticeable
differences, or JNDs).
In its second sense, colour difference refers to colour components where
brightness is "removed". Vision has poor response to spatial detail in
coloured areas of the same luminance, compared to its response to luminance
spatial detail. If data capacity is at a premium it is advantageous to
transmit luminance with full detail and to form two colour difference
components each having no contribution from luminance. The two colour
components can then have spatial detail removed by filtering, and can be
transmitted with substantially less information capacity than luminance.
Instead of using a true luminance component to represent brightness, it is
ubiquitous for practical reasons to use a luma signal that is computed
nonlinearly as outlined above ( What is luma? ).
The easiest way to "remove" brightness information to form two colour
channels is to subtract it. The luma component already contains a large
fraction of the green information from the image, so it is standard to form
the other two components by subtracting luma from nonlinear blue (to form
B'-Y') and by subtracting luma from nonlinear red (to form R'-Y').
These are called chroma.
Various scale factors are applied to (B'-Y') and (R'-Y') for different
applications. The Y 'PBPR scale factors are optimized for component analog
video. The Y 'CBCR scaling is appropriate for component digital video such
as studio video, JPEG and MPEG. Kodak's PhotoYCC(tm) uses scale factors
optimized for the gamut of film colours. Y'UV scaling is appropriate as an
intermediate step in the formation of composite NTSC or PAL video signals,
but is not appropriate when the components are kept separate. The Y'UV
nomenclature is now used rather loosely, and it sometimes denotes any
scaling of (B'-Y') and (R'-Y'). Y 'IQ coding is obsolete.
The subscripts in CBCR and PBPR are often written in lower case. I find
this to compromise readability, so without introducing any ambiguity I
write them in uppercase. Authors with great attention to detail sometimes
"prime" these quantities to indicate their nonlinear nature, but because no
practical image coding system employs linear colour differences I consider
it safe to omit the primes.
C-27 HOW DO I OBTAIN COLOUR DIFFERENCE COMPONENTS FROM TRISTIMULUS
VALUES?
Here is the block diagram for luma/colour difference encoding and
decoding:
<< A nice diagram is included in the .PDF and .PS versions. >>
From linear XYZ - or linear R1 G1 B1 whose chromaticity coordinates are
different from the interchange standard - apply a 3x3 matrix transform
to obtain linear RGB according to the interchange primaries. Apply a a
nonlinear transfer function ("gamma correction") to each of the components
to get nonlinear R'G'B'. Apply a 3x3 matrix to obtain colour
difference components such as Y'PBPR , Y'CBCR or PhotoYCC. If necessary,
apply a colour subsampling filter to obtain subsampled colour difference
components. To decode, invert the above procedure: run through the block
diagram right-to-left using the inverse operations. If your monitor
conforms to the interchange primaries, decoding need not explicitly use a
transfer function or the tristimulus 3x3.
The block diagram emphasizes that 3x3 matrix transforms are used for two
distinctly different tasks. When someone hands you a 3x3, you have to ask
for which task it is intended.
C-28 HOW DO I ENCODE Y'PBPR COMPONENTS?
Although the following matrices could in theory be used for tristimulus
signals, it is ubiquitous to use them with gamma-corrected signals.
To encode Y'PBPR , start with the basic Y', (B'-Y') and (R'-Y')
relationships:
Eq 1
[ Y' 601 ] [ 0.299 0.587 0.114 ] [ R' ]
[ B'-Y' 601 ]=[-0.299 -0.587 0.886 ]*[ G' ]
[ R'-Y' 601 ] [ 0.701 -0.587 -0.114 ] [ B' ]
{{ 0.299, 0.587, 0.114},
{-0.299,-0.587, 0.886},
{ 0.701,-0.587,-0.114}}
Y'PBPR components have unity excursion, where Y' ranges [0..+1] and each
of PB and PR ranges [-0.5..+0.5]. The (B'-Y') and (R'-Y') rows need to
be scaled. To encode from R'G'B' where reference black is 0
and reference white is +1:
Eq 2
[ Y' 601 ] [ 0.299 0.587 0.114 ] [ R' ]
[ PB 601 ]=[-0.168736 -0.331264 0.5 ]*[ G' ]
[ PR 601 ] [ 0.5 -0.418688 -0.081312 ] [ B' ]
{{ 0.299 , 0.587 , 0.114 },
{-0.168736,-0.331264, 0.5 },
{ 0.5 ,-0.418688,-0.081312}}
The first row comprises the luma coefficients; these sum to unity. The
second and third rows each sum to zero, a necessity for colour difference
components. The +0.5 entries reflect the maximum excursion of PB and PR of
+0.5, for the blue and red primaries [0, 0, 1] and [1, 0, 0].
The inverse, decoding matrix is this:
[ R' ] [ 1. 0. 1.402 ] [ Y' 601 ]
[ G' ]=[ 1. -0.344136 -0.714136 ]*[ PB 601 ]
[ B' ] [ 1. 1.772 0. ] [ PR 601 ]
{{ 1. , 0. , 1.402 },
{ 1. ,-0.344136,-0.714136},
{ 1. , 1.772 , 0. }}
C-29 HOW DO I ENCODE Y'CBCR COMPONENTS FROM R'G'B' IN [0, +1]?
Rec. 601 specifies eight-bit coding where Y' has an excursion of 219 and
an offset of +16. This coding places black at code 16 and white at code
235, reserving the extremes of the range for signal processing headroom and
footroom. CB and CR have excursions of +/-112 and offset of +128, for a
range of 16 through 240 inclusive.
To compute Y'CBCR from R'G'B' in the range [0..+1], scale the rows of
the matrix of Eq 2 by the factors 219, 224 and 224, corresponding to the
excursions of each of the components:
Eq 3
{{ 65.481, 128.553, 24.966},
{ -37.797, -74.203, 112. },
{ 112. , -93.786, -18.214}}
Add [16, 128, 128] to the product to get Y'CBCR.
Summing the first row of the matrix yields 219, the luma excursion from
black to white. The two entries of 112 reflect the positive CBCR extrema of
the blue and red primaries.
Clamp all three components to the range 1 through 254 inclusive, since Rec.
601 reserves codes 0 and 255 for synchronization signals.
To recover R'G'B' in the range [0..+1] from Y'CBCR, subtract [16, 128, 128]
from Y'CBCR, then multiply by the inverse of the matrix in Eq 3 above:
{{ 0.00456621, 0. , 0.00625893},
{ 0.00456621,-0.00153632,-0.00318811},
{ 0.00456621, 0.00791071, 0. }}
This looks scary, but the Y'CBCR components are integers in eight
bits and the reconstructed R'G'B' are scaled down to the range
[0..+1].
C-30 HOW DO I ENCODE Y'CBCR COMPONENTS FROM COMPUTER R'G'B' ?
In computing it is conventional to use eight-bit coding with black at code 0
and white at 255. To encode Y'CBCR from R'G'B' in the range [0..255], using
eight-bit binary arithmetic, scale the Y'CBCR matrix of Eq 3 by 256/255:
{{ 65.738, 129.057, 25.064},
{ -37.945, -74.494, 112.439},
{ 112.439, -94.154, -18.285}}
The entries in this matrix have been scaled up by 256, assuming that you will
implement the equation in fixed-point binary arithmetic, using a shift by eight
bits. Add [16, 128, 128] to the product to get Y'CBCR.
To decode R'G'B' in the range [0..255] from Rec. 601 Y'CBCR, using
eight-bit binary arithmetic , subtract [16, 128, 128] from Y'CBCR,
then multiply by the inverse of the matrix above, scaled by 256:
Eq 4
{{ 298.082, 0. , 408.583},
{ 298.082, -100.291, -208.12 },
{ 298.082, 516.411, 0. }}
You can remove a factor of 1/256 from these coefficients, then accomplish the
multiplication by shifting. Some of the coefficients, when scaled by 256, are
larger than unity. These coefficients will need more than eight multiplier
bits.
For implementation in binary arithmetic the matrix coefficients have to be
rounded. When you round, take care to preserve the row sums of [1, 0, 0].
The matrix of Eq 4 will decode standard Y'CBCR components to RGB
components in the range [0..255], subject to roundoff error. You must take
care to avoid overflow due to roundoff error. But you must protect against
overflow in any case, because studio video signals use the extremes of the
coding range to handle signal overshoot and undershoot, and these will
require clipping when decoded to an RGB range that has no headroom or
footroom.
C-31 HOW DO I ENCODE Y'CBCR COMPONENTS FROM STUDIO VIDEO?
Studio R'G'B' signals use the same 219 excursion as the luma component
of Y'CBCR. To encode Y'CBCR from R'G'B' in the range [0..219], using
eight-bit binary arithmetic, scale the Y'CBCR encoding matrix of Eq 3
above by 256/219. Here is the encoding matrix for studio video:
{{ 65.481, 128.553, 24.966},
{ -37.797, -74.203, 112. },
{ 112. , -93.786, -18.214}}
To decode R'G'B' in the range [0..219] from Y'CBCR, using eight-bit
binary arithmetic, use this matrix:
{{ 256. , 0. , 350.901},
{ 256. , -86.132, -178.738},
{ 256. , 443.506, 0. }}
When scaled by 256, the first column in this matrix is unity, indicating
that the corresponding component can simply be added: there is no need for
a multiplication operation. This matrix contains entries larger than 256;
the corresponding multipliers will need capability for nine bits.
The matrices in this section conform to Rec. 601 and apply directly to
conventional 525/59.94 and 625/50 video. It is not yet decided whether
emerging HDTV standards will use the same matrices, or adopt a new set of
matrices having different luma coefficients. In my view it would be
unfortunate if different matrices were adopted, because then image coding
and decoding would depend on whether the picture was small (conventional
video) or large (HDTV).
In digital video, Rec. 601 standardizes subsampling denoted 4:2:2, where CB
and CR components are subsampled horizontally by a factor of two with
respect to luma. JPEG and MPEG conventionally subsample by a factor of two
in the vertical dimension as well, denoted 4:2:0.
Colour difference coding is standardized in Rec. 601. For details on colour
difference coding as used in video, consult Watkinson [16].
C-32 HOW DO I DECODE R'G'B' FROM PHOTOYCC?
Kodak's PhotoYCC uses the Rec. 709 primaries, white point and transfer
function. Reference white codes to luma 189; this preserves film
highlights. The colour difference coding is asymmetrical, to encompass film
gamut. You are unlikely to encounter any raw image data in PhotoYCC form
because YCC is closely associated with the PhotoCD(tm) system whose
compression methods are proprietary. But just in case, the following
equation is comparable to in that it produces R'G'B' in the range
[0..+1] from integer YCC. If you want to return R'G'B' in a different
range, or implement the equation in eight-bit integer arithmetic, use the
techniques in the section above.
[ R'709 ] [ 0.0054980 0.0000000 0.0051681 ] [ Y'601,189 ] [ 0 ]
[ G'709 ]=[ 0.0054980 -0.0015446 -0.0026325 ]* ( [ C1 ] - [ 156 ] )
[ B'709 ] [ 0.0054980 0.0079533 0.0000000 ] [ C2 ] [ 137 ]
{{ 0.0054980, 0.0000000, 0.0051681},
{ 0.0054980, -0.0015446, -0.0026325},
{ 0.0054980, 0.0079533, 0.0000000}}
Decoded R'G'B' components from PhotoYCC can exceed unity or go below
zero. PhotoYCC extends the Rec. 709 transfer function above unity, and
reflects it around zero, to accommodate wide excursions of R'G'B'. To
decode to CRT primaries, clip R'G'B' to the range zero to one.
C-33 WILL YOU TELL ME HOW TO DECODE Y'UV AND Y'IQ?
No, I won't! Y'UV and Y'IQ have scale factors appropriate to composite
NTSC and PAL. They have no place in component digital video! You shouldn't
code into these systems, and if someone hands you an image claiming it's
Y'UV, chances are it's actually Y'CBCR, it's got the wrong scale factors,
or it's linear-light.
Well OK, just this once. To transform Y', (B'-Y') and (R'-Y')
components from Eq 1 to Y'UV, scale (B'-Y') by 0.492111 to get U and
scale R'-Y' by 0.877283 to get V. The factors are chosen to limit
composite NTSC or PAL amplitude for all legal R'G'B' values:
<< Equation omitted -- see PostScript or PDF version. >>
To transform to Y'IQ to Y'UV, perform a 33 degree rotation and an exchange
of colour difference axes:
<< Equation omitted -- see PostScript or PDF version. >>
C-34 HOW SHOULD I TEST MY ENCODERS AND DECODERS?
To test your encoding and decoding, ensure that colourbars are handled
correctly. A colourbar signal comprises a binary RGB sequence ordered for
decreasing luma: white, yellow, cyan, green, magenta, red, blue and black.
[ 1 1 0 0 1 1 0 0 ]
[ 1 1 1 1 0 0 0 0 ]
[ 1 0 1 0 1 0 1 0 ]
To ensure that your scale factors are correct and that clipping is not
being invoked, test 75% bars, a colourbar sequence having 75%-amplitude
bars instead of 100%.
C-35 WHAT IS PERCEPTUAL UNIFORMITY?
A system is perceptually uniform if a small perturbation to a component
value is approximately equally perceptible across the range of that value.
The volume control on your radio is designed to be perceptually uniform:
rotating the knob ten degrees produces approximately the same perceptual
increment in volume anywhere across the range of the control. If the
control were physically linear, the logarithmic nature of human loudness
perception would place all of the perceptual "action" of the control at the
bottom of its range.
The XYZ and RGB systems are far from exhibiting perceptual uniformity.
Finding a transformation of XYZ into a reasonably perceptually-uniform
space consumed a decade or more at the CIE and in the end no single system
could be agreed. So the CIE standardized two systems, L*u*v* and L*a*b*,
sometimes written CIELUV and CIELAB. (The u and v are unrelated to video U
and V.) Both L*u*v* and L*a*b* improve the 80:1 or so perceptual
nonuniformity of XYZ to about 6:1. Both demand too much computation to
accommodate real-time display, although both have been successfully applied
to image coding for printing.
Computation of CIE L*u*v* involves intermediate u' and v ' quantities,
where the prime denotes the successor to the obsolete 1960 CIE u and v
system:
uprime = 4 * X / (X + 15 * Y + 3 * Z);
vprime = 9 * Y / (X + 15 * Y + 3 * Z);
First compute un' and vn' for your reference white Xn , Yn and Zn. Then
compute u' and v ' - and L* as discussed earlier - for your colours.
Finally, compute:
ustar = 13 * Lstar * (uprime - unprime);
vstar = 13 * Lstar * (vprime - vnprime);
L*a*b* is computed as follows, for (X/Xn, Y/Yn, Z/Zn) > 0.01:
astar = 500 * (pow(X / Xn, 1./3.) - pow(Y / Yn, 1./3.));
bstar = 200 * (pow(Y / Yn, 1./3.) - pow(Z / Zn, 1./3.));
These equations are great for a few spot colours, but no fun for a million
pixels. Although it was not specifically optimized for this purpose, the
nonlinear R'G'B' coding used in video is quite perceptually uniform,
and has the advantage of being fast enough for interactive applications.
C-36 WHAT ARE HSB AND HLS?
HSB and HLS were developed to specify numerical Hue, Saturation and
Brightness (or Hue, Lightness and Saturation) in an age when users had to
specify colours numerically. The usual formulations of HSB and HLS are
flawed with respect to the properties of colour vision. Now that users can
choose colours visually, or choose colours related to other media (such as
PANTONE), or use perceptually-based systems like L*u*v* and L*a*b*, HSB and
HLS should be abandoned.
Here are some of problems of HSB and HLS. In colour selection where
"lightness" runs from zero to 100, a lightness of 50 should appear to be
half as bright as a lightness of 100. But the usual formulations of HSB and
HLS make no reference to the linearity or nonlinearity of the underlying
RGB, and make no reference to the lightness perception of human vision.
The usual formulation of HSB and HLS compute so-called "lightness" or
"brightness" as (R+G+B)/3. This computation conflicts badly with the
properties of colour vision, as it computes yellow to be about six times
more intense than blue with the same "lightness" value (say L=50).
HSB and HSL are not useful for image computation because of the
discontinuity of hue at 360 degrees. You cannot perform arithmetic mixtures
of colours expressed in polar coordinates.
Nearly all formulations of HSB and HLS involve different computations
around 60 degree segments of the hue circle. These calculations introduce
visible discontinuities in colour space.
Although the claim is made that HSB and HLS are "device independent", the
ubiquitous formulations are based on RGB components whose chromaticities
and white point are unspecified. Consequently, HSB and HLS are useless for
conveyance of accurate colour information.
If you really need to specify hue and saturation by numerical values,
rather than HSB and HSL you should use polar coordinate version of u* and
v*: h*uv for hue angle and c*uv for chroma.
C-37 WHAT IS TRUE COLOUR?
True colour is the provision of three separate components for additive red,
green and blue reproduction. True colour systems often provide eight bits
for each of the three components, so true colour is sometimes referred to
as 24-bit colour.
A true colour system usually interposes a lookup table between each
component of the framestore and each channel to the display. This makes it
possible to use a true colour system with either linear or nonlinear
coding. In the X Window System, true colour refers to fixed lookup tables,
and direct colour refers to lookup tables that are under the control of
application software.
C-38 WHAT IS INDEXED COLOUR?
Indexed colour (or pseudocolour), is the provision of a relatively small
number, say 256, of discrete colours in a colormap or palette. The
framebuffer stores, at each pixel, the index number of a colour. At the
output of the framebuffer, a lookup table uses the index to retrieve red,
green and blue components that are then sent to the display.
The colours in the map may be fixed systematically at the design of a
system. As an example, 216 index entries an eight-bit indexed colour system
can be partitioned systematically into a 6x6x6 "cube" to implement what
amounts to a direct colour system where each of red, green and blue has a
value that is an integer in the range zero to five.
An RGB image can be converted to a predetermined colormap by choosing, for
each pixel in the image, the colormap index corresponding to the "closest"
RGB triple. With a systematic colormap such as a 6x6x6 colourcube this
is straightforward. For an arbitrary colormap, the colormap has to be
searched looking for entries that are "close" to the requested colour.
"Closeness" should be determined according to the perceptibility of colour
differences. Using colour systems such as CIE L*u*v* or L*a*b* is
computationally prohibitive, but in practice it is adequate to use a
Euclidean distance metric in R'G'B' components coded nonlinearly
according to video practice.
A direct colour image can be converted to indexed colour with an
image-dependent colormap by a process of colour quantization that searches
through all of the triples used in the image, and chooses the palette for
the image based on the colours that are in some sense most "important".
Again, the decisions should be made according to the perceptibility of
colour differences. Adobe Photoshop(tm) can perform this conversion.
UNIX(tm) users can employ the pbm package.
If your system accommodates arbitrary colormaps, when the map associated
with the image in a particular window is loaded into the hardware colormap,
the maps associated with other windows may be disturbed. In window system
such as the X Window System(tm) running on a multitasking operating system
such as UNIX, even moving the cursor between two windows with different
maps can cause annoying colormap flashing.
An eight-bit indexed colour system requires less data to represent a
picture than a twenty-four bit truecolour system. But this data reduction
comes at a high price. The truecolour system can represent each of its
three components according to the principles of sampled continuous signals.
This makes it possible to accomplish, with good quality, operations such as
resizing the image. In indexed colour these operations introduce severe
artifacts because the underlying representation lacks the properties of a
continuous representation, even if converted back to RGB.
In graphic file formats such as GIF of TIFF, an indexed colour image is
accompanied by its colormap. Generally such a colormap has RGB entries that
are gamma corrected: the colormap's RGB codes are intended to be presented
directly to a CRT, without further gamma correction.
C-39 I WANT TO VISUALIZE A SCALAR FUNCTION OF TWO VARIABLES. SHOULD I USE RGB
VALUES CORRESPONDING TO THE COLOURS OF THE RAINBOW?
When you look at a rainbow you do not see a smooth gradation of colours.
Instead, some bands appear quite narrow, and others are quite broad.
Perceptibility of hue variation near 540 nm is half that of either 500 nm
or 600 nm. If you use the rainbow's colours to represent data, the
visibility of differences among your data values will depend on where they
lie in the spectrum.
If you are using colour to aid in the visual detection of patterns, you
should use colours chosen according to the principles of perceptual
uniformity. This an open research problem, but basing your system on CIE
L*a*b* or L*u*v*, or on nonlinear video-like RGB, would be a good start.
C-40 WHAT IS DITHERING?
A display device may have only a small number of choices of greyscale
values or colour values at each device pixel. However if the viewer is
sufficiently distant from the display, the value of neighboring pixels can
be set so that the viewer's eye integrates several pixels to achieve an
apparent improvement in the number of levels or colours that can be
reproduced.
Computer displays are generally viewed from distances where the device
pixels subtend a rather large angle at the viewer's eye, relative to his
visual acuity. Applying dither to a conventional computer display often
introduces objectionable artifacts. However, careful application of dither
can be effective. For example, human vision has poor acuity for blue
spatial detail but good colour discrimination capability in blue. Blue can
be dithered across two-by-two pixel arrays to produce four times the number
of blue levels, with no perceptible penalty at normal viewing distances.
C-41 HOW DOES HALFTONING RELATE TO COLOUR?
The processes of offset printing and conventional laser printing are
intrinsically bilevel: a particular location on the page is either covered
with ink or not. However, each of these devices can reproduce
closely-spaced dots of variable size. An array of small dots produces the
perception of light gray, and an array of large dots produces dark gray.
This process is called halftoning or screening. In a sense this is
dithering, but with device dots so small that acceptable pictures can be
produced at reasonable viewing distances.
Halftone dots are usually placed in a regular grid, although stochastic
screening has recently been introduced that modulates the spacing of the
dots rather than their size.
In colour printing it is conventional to use cyan, magenta, yellow and
black grids that have exactly the same dot pitch but different
carefully-chosen screen angles. The recently introduced technique of
Flamenco screening uses the same screen angles for all screens, but its
registration requirements are more stringent than conventional offset
printing.
Agfa's booklet [17] is an excellent introduction to practical concerns of
printing. And it's in colour! The standard reference to halftoning
algorithms is Ulichney [18], but that work does not detail the
nonlinearities found in practical printing systems. For details about
screening for colour reproduction, consult Fink [19]. Consult Frequently
Asked Questions about Gamma for an introduction to the transfer function of
offset printing.
C-42 WHAT'S A COLOUR MANAGEMENT SYSTEM?
Software and hardware for scanner, monitor and printer calibration have had
limited success in dealing with the inaccuracies of colour handling in
desktop computing. These solutions deal with specific pairs of devices but
cannot address the end-to-end system. Certain application developers have
added colour transformation capability to their applications, but the
majority of application developers have insufficient expertise and
insufficient resources to invest in accurate colour.
A colour management system (CMS) is a layer of software resident on a
computer that negotiates colour reproduction between the application and
colour devices. It cooperates with the operating system and the graphics
library components of the platform software. Colour management systems
perform the colour transformations necessary to exchange accurate colour
between diverse devices, in various colour coding systems including RGB,
CMYK and CIE L*a*b*.
The CMS makes available to the application a set of facilities whereby the
application can determine what colour devices and what colour spaces are
available. When the application wishes to access a particular device, it
requests that the colour manager perform a mathematical transform from one
space to another. The colour spaces involved can be device-independent
abstract colour spaces such as CIE XYZ, CIE L*a*b* or calibrated RGB.
Alternatively a colour space can be associated with a particular device. In
the second case the Colour manager needs access to characterization data
for the device, and perhaps also to calibration data that reflects the
state of the particular instance of the device.
Sophisticated colour management systems are commercially available from
Kodak, Electronics for Imaging (EFI) and Agfa. Apple's ColorSync(tm)
provides an interface between a Mac application program and colour
management capabilities either built-in to ColorSync or provided by a
plug-in. Sun has announced that Kodak's CMS will be shipped with the next
version of Solaris.
The basic CMS services provided with desktop operating systems are likely
to be adequate for office users, but are unlikely to satisfy high-end users
such as in prepress. All of the announced systems have provisions for
plug-in colour management modules (CMMs) that can provide sophisticated
transform machinery. Advanced colour management modules will be
commercially available from third parties. For an application developer's
prespective on colour management, see Aldus [20].
C-43 HOW DOES A CMS KNOW ABOUT PARTICULAR DEVICES?
A CMS needs access to information that characterizes the colour
reproduction capabilities of particular devices. The set of
characterization data for a device is called a device profile. Industry
agreement has been reached on the format of device profiles, although
details have not yet been publicly disseminated. Apple has announced that
the forthcoming ColorSync version 2.0 will adhere to this agreement.
Vendors of colour peripherals will soon provide industry-standard profiles
with their devices, and they will have to make, buy or rent
characterization services.
If you have a device that has not been characterized by its manufacturer,
Agfa's FotoTune(tm) software - part of Agfa's FotoFlow(tm) colour manager -
can create device profiles.
C-44 IS A COLOUR MANAGEMENT SYSTEM USEFUL FOR COLOUR SPECIFICATION?
Not yet. But colour management system interfaces in the future are likely
to include the ability to accommodate commercial proprietary colour
specification systems such as pantone(tm) and colorcurve(tm). These vendors
are likely to provide their colour specification systems in shrink-wrapped
form to plug into colour managers. In this way, users will have guaranteed
colour accuracy among applications and peripherals, and application vendors
will no longer need to pay to license these systems individually.
C-45 I'M NOT A COLOUR EXPERT. WHAT PARAMETERS SHOULD I USE TO CODE MY
IMAGES?
Use the CIE D65 white point (6504 K) if you can.
Use the Rec. 709 primary chromaticities. Your monitor is probably already
quite close to this. Rec. 709 has international agreement, offers excellent
performance, and is the basis for HDTV development so it's future-proof.
If you need to operate in linear light, so be it. Otherwise, for best
perceptual performance and maximum ease of interchange with digital video,
use the Rec. 709 transfer function, with its 0.45-power law. If you need
Mac compatibility you will have to suffer a penalty in perceptual
performance. Raise tristimulus values to the 1/1.8-power before presenting
them to QuickDraw.
To code luma, use the Rec. 601 luma coefficients 0.299, 0.587 and 0.114.
Use Rec. 601 digital video coding with black at 16 and white at 235.
Use prime symbols (') to denote all of your nonlinear components!
PhotoCD uses all of the preceding measures. PhotoCD codes colour
differences asymmetrically, according to film gamut. Unless you have a
requirement for film gamut, you should code into colour differences using
Y'CBCR coding with Rec. 601 studio video (16..235/128+/-112) excursion.
Tag your image data with the primary and white chromaticity, transfer
function and luma coefficients that you are using. TIFF 6.0 tags have been
defined for these parameters. This will enable intelligent readers, today
or in the future, to determine the parameters of your coded image and give
you the best possible results.
C-46 REFERENCES
[1] Publication CIE No 17.4, International Lighting Vocabulary. Central
Bureau of the Commission Internationale de L'Eclairage, Vienna, Austria.
[2] LeRoy E. DeMarsh and Edward J. Giorgianni, "Color Science for Imaging
Systems", Physics Today, September 1989, 44-52.
[3] W.F. Schreiber, Fundamentals of Electronic Imaging Systems, Second
Edition (Springer-Verlag, 1991), ISBN 0-387-53272-2.
[4] Publication CIE No 15.2, Colorimetry, Second Edition (1986), Central
Bureau of the Commission Internationale de L'Eclairage, Vienna, Austria.
[5] Guenter Wyszecki and W.S. Styles, Color Science: Concepts and Methods,
Quantitative Data and Formulae, Second Edition (John Wiley & Sons, New
York, 1982), ISBN 0-471-02106-7.
[6] Guenter Wyszecki and D.B. Judd, Color in Business, Science and
Industry, Third Edition (John Wiley, New York, 1975), ISBN 0-471-45212-2.
[7] R.W.G. Hunt, The Reproduction of Colour in Photography, Printing and
Television, Fourth Edition (Fountain Press, Tolworth, England, 1987), ISBN
0-86343-088-0.
[8] ITU-R Recommendation BT.709, Basic Parameter Values for the HDTV
Standard for the Studio and for International Programme Exchange (1990),
[formerly CCIR Rec. 709], ITU, 1211 Geneva 20, Switzerland.
[9] Bruce J. Lindbloom, "Accurate Color Reproduction for Computer Graphics
Applications", Computer Graphics, Vol. 23, No. 3 (July 1989), 117-126
(proceedings of SIGGRAPH '89).
[10] William B. Cowan, "An Inexpensive Scheme for Calibration of a Colour
Monitor in terms of CIE Standard Coordinates", Computer Graphics, Vol. 17,
No. 3 (July 1983), 315-321.
[11] SMPTE RP 177-1993, Derivation of Basic Television Color Equations.
[12] Television Engineering Handbook, Featuring HDTV Systems, Revised
Edition by K. Blair Benson, revised by Jerry C. Whitaker (McGraw-Hill,
1992), ISBN 0-07-004788-X. This supersedes the Second Edition.
[13] Roy Hall, Illumination and Color in Computer Generated Imagery
(Springer-Verlag, 1989), ISBN 0-387-96774-5.
[14] Chet S. Haase and Gary W. Meyer, "Modelling Pigmented Materials for
Realistic Image Synthesis", ACM Transactions on Graphics, Vol. 11, No. 4,
1992, p. 305.
[15] Maureen C. Stone, William B. Cowan and John C. Beatty, "Color Gamut
Mapping and the Printing of Digital Color Images", ACM Transactions on
Graphics, Vol. 7, No. 3, October 1988.
[16] John Watkinson, An Introduction to Digital Video (Focal Press,
Sevenoaks, Kent, England, 1994), ISBN 0-240-51380-0.
[17] Agfa Corporation, An introduction to Digital Color Prepress, Volumes 1
and 2 (1990), Prepress Education Resources, P.O. Box 7917 Mt.Prospect, IL
60056-7917. 800-395-7007.
[18] Robert Ulichney, Digital Halftoning (MIT Press, Cambridge, MA, 1988),
ISBN 0-262-21009-6.
[19] Peter Fink, PostScript Screening: Adobe Accurate Screens (Adobe Press,
1992), ISBN 0-672-48544-3.
[20] Color management systems: Getting reliable color from start to finish,
Aldus Corporation, <ftp://www.adobe.com/PDFs/FaxYI/500301.pdf>.
[21] Overview of color publishing, Aldus Corporation,
<ftp://www.adobe.com/PDFs/FaxYI/500302.pdf>. Despite appearances and title,
this document is in greyscale, not colour.
C-47 CONTRIBUTORS
Thanks to Norbert Gerfelder, Alan Roberts and Fred Remley for their
proofreading and editing. I learned about colour from LeRoy DeMarsh, Ed
Giorgianni, Junji Kumada and Bill Cowan. Thanks!
I welcome corrections, and suggestions for additions and improvements.
Charles A. Poynton
------------------------------